BMII is a professional and powerful vehicle fault diagnosis tool developed by iCarsoft Technology Inc. With a 4” TFT LCD and unique diagnostic software, it features full ECU diagnosis of single vehicle brand and test modes including CANBUS, ISO9141, KWP2000, J1850 etc. 

Features:

• BMII can do it all-read and clear trouble codes on all the systems such as engine, transmission 
• ABS and airbag etc.
• Read Data Stream
• Full ECU Diagnosis
• Apply to the entire models of BM equipped with OBDII-16 DLC
• Easy To Use With Metal Dome Keys
• Oil Light/Service Reset: Support service lamp reset, Brake pad reset function, Steering angle sensor calibration etc.
EPB: Open and close the brake pads, Read and clear EPB/SBC trouble codes.
• Turn off the ECU and brake warning light, Diagnose EPB/SBC caliper functionality, Reset the brake pad thickness service etc.
• ABS/AIRBAG: Diagnose ABS/ SRS system codes, Read/clear codes of ABS/SRS system and turn off ABS/SRS warning light, Perform bi-directional tests such as cycling the ABS solenoids, Retrieve ABS/SRS ECU information etc.
• ETC

Twelve Super Advantages:

• Read & Clear DTCs
• Read Data Stream
• Full ECU Diagnosis
• Diagnose Single-brand Models Equipped With OBDII-16 DLC
• Easy To Use With Metal Dome Keys
• Oil Light/Service Reset 
• EPB 
• ETC
• 4.0” TFT LCD With 480 * 320 Pixels
• USB 2.0 High Speed Upgrade
• Upgrade Via TF Card
• Support Multi-language
And for more information, please refer to User's Manual.

OBDII functions:
1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
4. Data Stream
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer.
7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.

Specifications:
•  Display: 4.0” TFT LCD , with 480 * 320 Pixels
•  Operation Temperature: 0  -- 50
•  Storage Temperature: -20 -- 70
•  Power: 9V -- 18V
•  Operating current:150mA@12V(Typical)
•  Power consumption:1.8W(Typical)
•  Dimension:205mm*110mm*31mm(LxWxH)
•  Weight:350g
  
Contents:
•  Main Unit BMII
•  Hardcopy User’s Manual
•  Main cable
•  USB cable
•  TF Card
•  Nylon carry case
•  TF card reader