BMW USB OBD Tool set INPA ISTA D NCS K + DCAN

...Dealer Level Diagnostic with easy install up to date 04/2017***

k + dcan, bmw, diagnostic, bmw ISTA, ISTA D, Rheingold, coding, usb obd2, bmw obd Tool, INPA, NCS expert, EDIABAS, FTDI ft232rq

This USB Interface and Software set allows coding and full diagnostic for your BMW, MINI or ROLLS ROYCE. This package contains everything you need to communicate with your car, as a dealer would do in a workshop, but allows you to do it using your own laptop and in the meantime saving you expensive dealer diagnostic fees.

The INPA 5.06 CAN-BUS interface will work and handle your BMW with OBD II protocol from 1996 to today`s model lines. The INPA software is available only in german language. For request you can have an English version as well. (It is necessary only for the interface and you are not going to use it)

You will have the newest version of the ISTA D Rheingold software as well which is currently used by all the factory BMW dealers and shops. It is a factory BMW diagnostic system which gives you more detailed information and solution than any other available diagnostic software on the market. Allows you to perform traced fault detection with detailed wiring diagrams, connector wives and pin assignments. English and german language options are both available.

All softwares are fully tested before shipping and come with everything required to get you started. English menus, NO hidden extras, NO surprises! Why Pay Dealer Prices when you can do this yourself and saving you $$$.

With this package you will get:

1 x DVD INPA 5.06, NCS Expert, K+DCAN Drivers

3 x DVD ISTA D Rheingold up to date 04/2017

1 x K+D CAN USB OBD2 Interface FTDI FT232RQ w/switch

1 x Step-by-step easy to follow Installation Instruction

High quality K+D CAN USB OBD II Interface is included!

K+D CAN Interface Features

Connects to USB (1.5 m cable, creates virtual COM port)

Supports Double K-Line

Supports High Speed D-PT-CAN and CAN (500 kbit /s)

Supports Low-Speed CAN PT (100 kbit /s)

Detects battery voltage through control line

Detects contact via control line

Works on USB port, USB RS-232 adapter not needed

Installation- and technical support if required

We DO NOT sell surprises like many others! You will get what you pay for!

Note: If you buy the cable from other supplier please make sure you buy the one with the switch. Old models (without switch) will not work on both K - and the newer D Can models! You will have limited access with those simple interfaces.

Bonus Content Digital Download (on request only):

BMW Coding Tool v2.5.0 (an alternative to NCS Dummy or for updating DATEN files)

NCS Expert 4.0.1 (with English menus and buttons, NCS Dummy Profile pre-installed)

NCS Dummy 0.6.0.4

EDIABAS 7.3.0

Tool32 4.0.3

WinKFP 5.3.1

Integrated SP-DATEN v53.3

K+DCAN USB INPA compatible cable drivers

Step-by-step installation instructions

Beginner easy-to-follow CODING GUIDE for BMW`s

Software Functions:

► Auto-identify your vehicle number, chassis, ECU etc.

► Read out fault memory and data from all control unit / freeze frame data

► Trace fault codes / have step by step service plans ready

► Have detailed wiring diagrams, connector wives, pin assignments

► Reset Service Light, adjust service intervals and clear oil service

► Code New Battery to your BMW

► Read / Clear / Reset ABS fault codes

► Interrogate and Reset reported Airbag problems

► Detect battery and ignition voltage

► Activate components

► Control unit adaptation

► Stream live data

► Coding of vehicle functions

► Upload and download flash data

► Code / pair key memory

► Code / Program Modules

► Encode New Modules

► Install new control units

► Update vehicle software and firmware

► Synchronize EWS to DME

► Reset SMG / SSG functions

+ Many more...

...All The Tools You Need To Succeed!***

k + dcan, bmw, diagnostic, bmw ISTA, ISTA D, Rheingold, coding, usb obd2, bmw obd Tool, INPA, NCS expert, EDIABAS, FTDI ft232rq

Model compatibility:

K-CAN 1996-2006

D-CAN 2006-2016

RJ45 ENET F series after 11/2016

Note: F series after 11/2016 require Ethernet RJ45 ENET Cable which is not included in this listing.

PC requirement:

Windows 7, 8 /8.1 10 (32 and 64-bit)
USB port 2.0/3.0,

2GB RAM or more recommended

20GB free HDD or SSD space

(If you are willing to use the v61 Daten update, you need an additional 15GB of free space)

Note: It can be installed on Apple MacBook using apple boot camp!

100% CUSTOMER SATISFACTION! BUY WITH CONFIDENCE!

Payment and Shipping Terms

We offer FREE shipping on all orders!

We accept payment via any of the following methods:

PayPal, Credit or Debit card

Immediate payment is required for buy-it-now listings.

Your order will be dispatched within 24 hours of cleared payment; Packages are shipped by USPS First Class (domestic buyers) and USPS First Class International (International buyers).

Returns policy

We want all of our customers to be delighted with their purchase. All softwares are fully tested before shipping. If for whatever reason your softwares would be faulty then we offer a free replacement or full refund within 30 days of delivery. Please note that all returns requires the evidence of faultiness.

Contact us

If you have any questions, please don’t hesitate to contact us as we’d be delighted to help in any way we can.

We provide installation and after sale technical support for your purchase, but do not provide coding and diagnostic service.

We aim to reply to all emails or eBay messages within 24 hours.

BMW is a registered trademark of BMW AG and is only used in this listing as reference for compatibility information. No copyright infringement is intended.