Ancel BST500 12V 24V Car Heavy Truck Battery Tester Charge System Digital Analyzer Tool Diagnostics Test Car
US BST500 Battery Tester

 

 

 

Ancel BST500 Battery Tester can easily, quickly and accurately measure12v car and 24v heavy truck the actual cold cranking current capability to judge the health condition of the battery itself. BST500 battery tester can detect common faults of both starting and generator charging systems, which helps you achieve quick repair to the vehicle problems. 
 
car right newBST500 12V Car & 24V Duty Truck Battery Tester Features and Benefits:
* Multiple vehicle applications –passenger cars and duty trucks
* Tests batteries from rated from 100 to 2000CCA
* Tests multiple battery types- regular flooded,AGM flat plate ,AGM spiral and gel
* Tests multiple rating systems-CCA,BCI,CA,MCA,JIS,DIN,IEC,EN,SAE,GB
* Tests the batteries on the car directly- no need to remove the battery
* Detects bad cells
* Quick and accurate test result display in just 3 seconds
* Tests 12&24 volt charging system
* Advanced starter /alternator test
* Quick starter analysis without disabling the ignition
* Does not emit light,heat or spark ,or discharge battery-keeps operation safe for all levels of users
* Automatic temperature compensation
* Ripple voltage test for easy and intuitive check of faults
* Extremely easy to use with large backlight LCD display and menu-driven operation.
 
1. Support language:
English, French, German, Italian, Russian, Spanish, and Janpanese.
 
 
 
 
2. Support Car and Duty Truck
12V Car Battery Tester
24V Duty Truck Battery Tester
BST500 Battery Analyzer is dedicatedly developed to test 6V & 12V regular flooded, AGM flat plate, AGM spiral and gel batteries and 12V & 24V starting and charging system. It provides a quick, easy and affordable solution for technicians to check battery health and detect faults of starting and charging system.
 
 
car right newEngine System Activation Load Test
Start the engine to make the tester record the lowest voltage in this process automatically. For the 12V system, the standard voltage is 9.6V; for 24V system, the standard voltage is 16V. If the lowest voltage is higher than the 9.6V (for the 24V system, the lowest voltage is over 16V), the system is good. If the lowest voltage is lower than the standard voltage, the system is not good.
car right newMaximum Load System Test
For the 12V system, the standard voltage is 12.8V, for the 24V system, the standard voltage is 25.6V. If the lowest voltage is higher than the 12.8V (for the 24V system, the lowest voltage is over 25.6V), the system runs normally. If the lowest voltage is lower than 12.8V (for the 24V system, the lowest voltage is under 25.6V), please check if the engine belt is damaged and the wires are short-circuited.
car right newCharging System Test
For the 12V system, the standard maximum voltage is 15V, the standard minimum voltage is 13.3V; for the 24V system, the standard maximum voltage is 30V, the standard minimum voltage is 26.6V. If the current voltage is higher than 15V or 30V, please check the voltage regulator. If the current voltage is lower than 13.3V or 26.6V, please check the connections, wires, and engine.
 
 

car right newBST500 Battery Tester Advanced Functionality:

Applicable to a variety of models, all kinds of batteries , and a variety of system mode
Directly detected in the car , do not need to remove the battery
Directly test the battery of the loss of electricity , bad cell batter
 

car right newBST500 Battery Tester Test Criteria and Scope:

CCA 100-2000 (SAE & BCI to develop the standard most commonly used : the cold-start battery rating )
BCI 100-2000 ( international battery Committee standards )
CA 100-2000 (0 C when the effective starting current rating)
MCA 100-2000 ( ships standard effective starting current rating , 0 C )
JIS 26A17 - 245H52 ( Japanese Industrial Standard)
Standard DIN 100-1400 ( German Automobile Industry Committee )
The IEC 100-1400 ( International Electrotechnical Commission standard )
EN 100-2000 ( European Automobile Manufacturers Association standards )
SAE 100-2000 ( U.S. Engineers Standard)
GB 100-1400 ( Chinese National Standard
 
Package Included:
1 x Battery Analyzer BST500 Main Unit
1 x User's Guide
1 x Case
 
 
BST500 Test battery details (2)  BST500 Test battery details (3)
 
 
 
 
PushAuction

DataCaciques