WIR GEBEN 2 JAHRE GARANTIE!
 

Das Angebot ist differenzbesteuert und daher MwSt.-frei!

Wenn Sie auf einer Rechnung mit ausgewiesener Mehrwertsteuer bestehen, informieren Sie uns bitte, damit wir ein entsprechendes Ebay-Angebot speziell für Sie erstellen 

können.

Das Angebot richtet sich ausschließlich an Personen außerhalb Österreichs und an gewerbliche Käufer in der EU, ist daher MwSt. FREI!

Privatpersonen, wenn die zufällig den Artikel ersteigert haben, erhalten eine Rechnung gemäß § 24 UStG 1994 (Differenzbesteuerung) - MwSt.-FREI!

Bitte mailen Sie uns sofort nach Auktionsende/Kauf Ihre UID (Umsatzsteuer-Identifikationsnummer), damit wir für Sie eine Netto-Rechnung erstellen können. Sollten Sie als 

Unternehmer noch keine UID haben, beantragen Sie diese bitte beim Finanzamt oder kontaktieren Sie uns.

Product overview

HPE 5800 Switch Series offer an unmatched combination of Gigabit and 10 Gigabit Ethernet port density, high-availability architecture, and full Layer 2 and Layer 3 dual-stack IPv4 and IPv6 capabilities. In addition to wire-speed line-rate performance on all ports, the switches include patented Intelligent Resilient Framework (IRF) technology and Rapid Ring Protection Protocol (RRPP), which allow local or geographically distributed HPE 5800 switches to be interconnected for higher resiliency and performance. Available in PoE and non-PoE models as well as 1 RU and 2 RU form-factor configurations, HPE 5800 Switch Series are built on open standards and include an open application architecture (OAA) module slot that enables flexible deployment options for new services. These versatile switches are ideal for use in the network core of buildings or departments, or as high-performance switches in the convergence layer or network edge of enterprise campus networks.

Key features

- For enterprise edge, distribution, data center
- Cut-through design with low latency
- Support for up to 84 ports
- OAA module for flexible deployment
- Redundant, hot-swappable power supplies, fans

Quality of service (QoS)

- Powerful QoS feature
Creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, and DSCP or Type of Service (ToS) precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin (WDRR), and SP+WDRR
- Integrated network services
With support for open application architecture (OAA) modules, extends and integrates application capability into the network
- Ring Resiliency Protection Protocol (RRPP)
Provides fast recovery for ring Ethernet-based topology; provides consistent application performance for applications such as VoIP

Management

- Remote configuration and management
Enables configuration and management through a secure Web browser or a CLI located on a
remote device
- IEEE 802.1AB LLDP discovery
Advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications
- USB support
– File copy
Allows users to copy switch files to and from a USB Flash drive
- DHCP options
– DNS Relay and SMTP Redirection
– DHCP Server (RFC 2131), Client, and Option-82 Relay (RFC 3046)
- sFlow®
Provides scalable, ASIC-based network monitoring and accounting, which allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real-time network monitoring purposes
- SNMPv1, v2c, and v3
Facilitate centralized discovery, monitoring, and secure management of networking devices
- Network Time Protocol (NTP)
Synchronizes timekeeping among distributed time servers and clients; keeps timekeeping consistent among all clock-dependent devices within the network so that the devices can provide diverse applications based on the consistent time

Connectivity

- High-density port connectivity
Supports up to 84 1-Gigabit ports per unit (612 per stack)
- Auto-MDIX
Automatically adjusts for straight-through or crossover cables on all 10/100 ports
- Jumbo frames
On Gigabit Ethernet and 10 Gigabit ports, jumbo frames of 9k size allow high-performance
remote backup and disaster-recovery services
- IEEE 802.3af Power over Ethernet (PoE)
Provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as
IP phones, wireless access points, and security cameras
- IEEE 802.3at Power over Ethernet (PoE+) support
Simplifies deployment and dramatically reduces installation costs by helping to eliminate the
time and cost involved in supplying local power at each access point location
- IPv6 native support
– IPv6 host
Enables switches to be managed and deployed at the IPv6 network’s edge
– Dual stack (IPv4/IPv6)
Transitions from IPv4 to IPv6, supporting connectivity for both protocols
– MLD Snooping
Forwards IPv6 multicast traffic to the appropriate interface
– IPv6 ACL/QoS
Supports ACL and QoS for IPv6 network traffic, preventing traffic flooding
– IPv6 routing
Supports IPv6 static routes and IPv6 versions of RIP, OSPF, IS-IS, and BGP routing protocols

Performance

- Hardware-based wire-speed access control lists (ACLs)
Help provide high levels of security and ease of administration without impacting network performance with a feature-rich TCAM-based ACL implementation
- Unique versatile architecture
Supports the best of both fixed-port and modular configurations

Resiliency and high availability

- Data center—optimized design
– HPE 5800AF-48G Switch (JG225A) supports
Front-to-back and back-to-front airflow for hot or cold aisles, rear rack mounts, and redundant hot-swappable AC or DC power and fans

Manageability

- Full-featured console
Provides complete control of the switch with a familiar CLI
- Web interface
Allows configuration of the switch from any Web browser on the network
- RMON and sFlow
Provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
- Multiple configuration files
Allow multiple configuration files to be stored to a flash image
- Troubleshooting
– Ingress and egress port monitoring
Enable network problem solving
– Traceroute and ping
Enable testing of network connectivity
– Virtual cable tests
Provide visibility to cable problems

Layer 2 switching

- GARP VLAN Registration Protocol
Allows automatic learning and dynamic assignment of VLANs
- 32k MAC addresses
Provide access to many Layer 2 devices
- 4,094 port-based VLANs
Provide security between workgroups
- IEEE 802.1ad QinQ and selective QinQ
Increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a high-speed campus or metro network
- Gigabit Ethernet port aggregation
Allows grouping of ports to increase overall data throughput to a remote device
- 10GbE port aggregation
Allows grouping of ports to increase overall data throughput to a remote device
- IPFIX/sFlow
Allows traffic sampling
- Spanning Tree Protocols (STP, MSTP, and RSTP) and STP root guard
Helps prevent network loops; up to 32 MSTP instances available

Layer 3 services

- Address Resolution Protocol (ARP)
Determines the MAC address of another IP host in the same subnet; supports static ARPs ;gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
- Dynamic Host Configuration Protocol (DHCP)
Simplifies the management of large IP networks and supports client and server; DHCP Relay enables DHCP operation across subnets

Layer 3 routing

- Layer 3 IPv4 routing
Provides routing of IPv4 at media speed; supports static routes, RIP and RIPv2, OSPF, IS-IS, and BGP
- RIP and RIPng support
Provides complete support of RIP for both IPv4 and IPv6
- OSPF and OSPFv3 support
Provides complete support of OSPF for both IPv4 and IPv6
Data sheet Page 5
- IS-IS and IS-ISv6 support
Provides complete support of IS-IS for both IPv4 and IPv6
- Layer 3 IPv6 routing
Provides routing of IPv6 at media speed; supports static routes, RIPng, OSPFv3, IS-ISv6, and BGP4+
- Bidirectional Forwarding Detection (BFD)
Enables link connectivity monitoring and reduces network convergence time for RIP, OSPF, BGP, IS-IS, VRRP, MPLS, and IRF
- Virtual Router Redundancy Protocol (VRRP) and VRRP Extended
Allow quick failover of router ports
- Policy-based routing
Makes routing decisions based on policies set by the network administrator
- IGMPv1, v2, and v3
Allow individual hosts to be registered on a particular VLAN
- PIM-SSM, PIM-DM, and PIM-SM (for IPv4 and IPv6)
Support IP multicast address management and inhibition of DoS attacks
- Equal-Cost Multipath (ECMP)
Enables multiple equal-cost links in a routing environment to increase link redundancy and scale bandwidth
- MPLS support
Provides extended support of MPLS, including MPLS VPNs and MPLS Traffic Engineering (MPLS TE)
- VPLS support
Provides extended support of VPLS for data center to data center communication at Layer 2;provides support of hierarchical VPLS for scalability

Security

- Unicast Reverse Path Forwarding (URPF)
Allows normal packets to be forwarded correctly, but discards the attaching packet due to lack
of reverse path route or incorrect inbound interface; prevents source spoofing and distributed
attacks; supports distributed URPF
- Defense-in-depth security
Provides integrated and distributed security enforcement that can be managed from a central
location, such as the HPE Intelligent Management Center (IMC)
- Advanced processor queuing mechanism
Helps prevent denial-of-service (DoS) attacks, while DHCP Snooping helps facilitate that devices
can only receive an IP address from a legitimate DHCP Server on the network
- IEEE 802.1X-based dynamic delivery of QoS, ACLs, and VLANs
Allows complete control over user network access
- Guest VLAN
Provides a browser-based environment to authenticated clients that is similar to IEEE 802.1X
Data sheet Page 6
- Port isolation
Secures and adds privacy, and prevents malicious attackers from obtaining user information
- MAC-based authentication
Allows or denies access to the switch based on a client MAC address
- HTTPS management
Provides secure Web management
- Multi-Customer Edge (MCE)—Multicast Virtual Routing and Forwarding (MVRF)
Provide MPLS Edge router support
- Public Key Infrastructure (PKI)
Is used to control access
- RADIUS/HWTACACS
Eases switch management security administration by using a password authentication server
- Secure Shell (SSHv2)
Encrypts all transmitted data for secure, remote CLI access over IP networks
- IP source guard
Helps prevent IP spoofing attacks; filters packets on a per-port basis, which prevents illegal
packets from being forwarded
- Access control lists (ACLs)
Helps provide high levels of security and ease of administration; 6k ingress entries and 1k
egress entries (IPv4 and IPv6)