The Renogy Rover MPPT Charge Controller is the most efficient type of charge controller. With up to 99% tracking efficiency, the Rover ensures maximum power point solar charging that gets more energy to your battery bank. Capable of automatically detecting 12V/24V lead acid battery systems, this crucial component is preset to also work with Gel, Flooded (wet cell), Sealed, and even Lithium batteries. When paired with the Renogy BT-1 Bluetooth Module and DC Home app you can view system performance in real-time and make parameter changes without having to get up!
Condition | |
New: | A brand-new, unused, unopened, undamaged item in its original packaging. |
Nominal Voltage: | 12/24V Auto Recognition |
Operating Temperature: | -35°C to 45°C |
Enclosure: | IP32 |
Terminals: | Up to 8 AWG |
Remote Temperature Sensor Cable Length: | 3m |
ROVER 40 AMP MPPT SOLAR CHARGE CONTROLLER
Nominal Voltage: | 12/24V Auto Recognition | Rated Charge Current: | 40 A |
Max. PV Input Power: | 12V/520W, 24V/1040W | Max. PV Input Voltage: | 100 VDC |
Self-Consumption: | < 100mA/12V; < 58mA/24V | Equalization Voltage: | Sealed:14.6V; Flooded: 14.8V; Gel: N/A; Lithium(LFP): N/A |
Float Voltage: | Sealed:13.8V; Flooded: 13.8V; Gel: 13.8V; Lithium(LFP): N/A | Boost Voltage: | Sealed: 14.4V; Flooded: 14.6V; Gel: 14.2V ; Lithium(LFP): 14.4V |
Operating Temperature: | -35°C to 45°C | Temperature Compensation: | -3mV/°C/2V |
Dimensions: | 238 x 173 x 72.5 mm | Weight: | 2.0kg |
Enclosure: | IP32 | Terminals: | Up to 8 AWG |
Remote Temperature Sensor Cable Length: | 3m |
BT-1 Bluetooth Module
Communication Protocol: | RS232 | Port Type: | RJ12 |
Input Voltage: | 12V | Protection Grade: | IP54 |
Standby Power Consumption: | 0.04W | Operating Power Consumption: | 0.05W |
Communication Range: | ≤82ft | Serial Baud Rate: | Fixed Baud Rate 9600bps |
Cable Length: | 5.00 m | Dimensions: | 67.3 x 35 x 14 mm |
Weight: | 130g | PInstallation Dimensions: | 67.3 φ3.5mm |
The off-grid solar system includes the solar panels, charge controller, batteries, inverter, Bluetooth module, and wirings. First, the battery should be hooked up to the charge controller with tray cables. Second, then connect your solar panel to your charge controller with adaptor kits.
Battery Protection: Battery Over Discharge protection , Battery Over Voltage protection, Battery Reverse Polarity protection Load Protection: Load Overload protection, Load Short Circuit protection, Controller Overheating protection PV Protection: PV Over Current Protection , PV Short Circuit protection , PV Reverse Polarity protection, Battery overheating protection
No. Please always add an external fuse between the charge controller and batteries. To determine the fuse size needed between the charge controller and battery bank, you can match the amperage rating on the charge controller. For instance, if you have one of our 20Amp charge controllers, we recommend using a 20Amp fuse.
Renogy Rover series solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track solar panels' maximum power voltage point as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range. This controller can work with standard off-grid 12/24V solar panels and with high voltage or multiple panels with voltage up to 100V.