Input Current: Maximum input current of 15A
Output voltage : 12V -80V continuously adjustable
Output current: maximum output current of 10A ( adjustable )
Output power: the effective power P = input voltage V * 10A
Conversion efficiency: up to 95% ( input voltage, current; output voltage and current impact of conversion efficiency )
Short circuit protection : Fuse
Weight :251g
1.Input voltage range: 3.5V-30V (output set voltage higher than the input voltage must be guaranteed)
2.Output voltage range: 4.0V-30V
3.Input maximum current: 5A (based on power conservation under nominal conditions the output current
Uin * Iin * efficiency = Uout * Iout)
5.Continuous operating current: 3A (good ventilation conditions, the output voltage and input voltage ratio can not be greater than 3)
6.Around 90% of the full load efficiency
Specification:
- Module property:Non-isolated step up module(boost)
- Input voltage:4.5V-32V
- Input current:0A-6A
- Output voltage:5V-42V
- Output current:0A-6A
- Working temperature:-40℃~+85℃
- Working frequency:180KHz
- Transfer efficiency:94%(max)
- Short circuit protection:Yes
- Over temperature protection:Yes
- Input reverse protection:NO
- PCB size:60x60x20mm
6-32V to 6-42V 8A
The highest conversion efficiency：96%
Input voltage：6~32（max 35V）
Output voltage: 6~42（max 52V）
Maximum input current: 8A
maximum current output: 5A
Static working current: 15mA
Power :70W
To adapt to the environment:-40~+85℃
Working frequency: 150KHz
Provide reverse connect protection, avoid the equipment damage caused by incorrect operation;
Stops booster, soft short circuit protection, short circuit, automatic recovery when short circuit faults remove;
With access to electricity, the LED indicator light, easy to understand
way to install：4*M3 screw
Connection mode: welding output terminals free
Module size: 30 mm high 20 mm long 60 mm wide
Module name :250W boost constant current module
Module properties: non-isolated step-up module (BOOST)
Input voltage: DC8.5V-48V
Input current: 10A (MAX) exceeds 8A please enhance heat dissipation
Quiescent current: 10mA (12V liter 20V, the output voltage, the higher
the current will increase too quiet)
Output voltage: 10-50V continuously adjustable
Constant] range: 0.2-8A
Temperature: -40 to + 85 degrees (ambient temperature is too high, please enhance heat dissipation)
Operating frequency: 150KHz
Conversion efficiency: up to 96%
Overcurrent protection: There
Input reverse polarity protection: Yes,
Installation: 4 3mm screw holes
Connection method: Connection Output
Module size: Length 70mm width 36mm height 13mm
Single module: 50 g
Package Includes:
1 X DC-DC Boost Step Up Converter
LCD Mini DC Power Supply Step Down
We provided Technical Support，PLease feel free to contact us.
This product uses new low voltage and high currency efficient DC-DC power technologies with a microcomputer control system to monitor voltage and current in real time.
Because of its small size and because it's easy to carry, it's the ideal and essential tool for students or small laboratories.
Note: Input voltage must be higher than the output voltage，So you can output 20V,
20V is strictly prohibited access to 5V, this will burn machine!!!
Performance and features:
- LCD screen with white characters and a blue background displays two groups of voltage and current simultaneously.
- Uses a standard DC-Socket (5.5/2.1) input
- Coarse and fine tuning positioner for precise voltage regulation.
- Input voltage 9-24V (max. 30V), reverse polarity protection
- Two groups of current can work simultaneously without conflict.
- Adjustable voltage available on DuPont connectors and terminal blocks which can be tightened with screws.
- Output voltage adjustable from 0.8V to 20V, max. 2A load with short circuit protection.
- Fixed 5V Output available on USB- and DuPont-Connectors. Max. 2A load with short circuit protection.
- Over 90% efficiency rate (related to the input and output voltage, current and dropout)
- Size: 80mm*80mm*25mm.
-Weight: about 85 grams.
Operation: Powers on automatically when power is attached. Use the “Power”-Button to switch off and on again.
Automatic zero-calibration may be less accurate with the age of the product, due to component aging and environmental temperature changes.
Calibration Mode: Disconnect power and all loads. Press the “Power”-Button and keep it pressed while connecting Power. The automatic zero-calibration will be performed. On success, the LCD will display 0.
Package Inclued:
- 1PCS X DC Powe Supply with box
- Free Alligator clip / 5.5mm
- Free DC connector
- Free 60cm red / black power cables