DIGITAL FAN SWITCH KIT (GAUGE style) Radiator Cooling (PART NO #0500)
A bright, attractive, compact high visibility 52mm round gauge with LED digital display for mounting in the driver’s compartment!
Automatically activates single or twin fans or a fan and Electric Water Pump at your set / targeted temperature when extra cooling is required. It can also detect transmission fluid temperature.
It senses air temperature as it passes through the radiator with the sensor placed in the radiator fin section or alternatively the sensor can also be placed directly into the coolant system in combination with a Temperature Sensor Adaptor Kit (Part 0409).
24 Volt Application
Kit sold in 12-volt configuration, for 24-volt application, you will need to purchase 2 x 24-volt relays.
Simply search for part 10534 in our store.
| KIT CONTENTS | |
| DESCRIPTION | UNITS |
| Digital Thermatic Fan Switch - 52mm Gauge | 1 |
| Digital Gauge Stand | 1 |
| Digital Gauge Thermatic Fan Switch - Wiring Loom | 1 |
| Fan Wiring Harness | 2 |
| Fuse 15 AMP | 2 |
| Fuse 30 AMP | 2 |
| Red Wire Joiner | 2 |
| Blue Wire Joiner | 2 |
| Relay - 12V 40 Amp 5 Pin | 2 |
| Blue 6mm Ring Terminal | 2 |
| Red 6mm Ring Terminal | 3 |
| Screw - Self Tapping 8X3/8 | 3 |
| Temperature Probe Mounting Kit | 1 |
| Installation Instructions | 1 |
AIR TEMPERATURE APPLICATION
The kit is set up for air temperature sensor application. For water / coolant applications, please read below.
It senses air temperature as it passes through the radiator and has an adjustable temperature range of 5ºC to 110ºC (41ºF to 230ºF).
The Temperature Sensor is placed in the radiator fin section as close to the hot coolant inlet as possible, no need to cut hoses or can be placed directly into the coolant system.
WATER / COOLANT APPLICATION
Part #0500 sensor can also be placed directly into the coolant system.
- Use #0465 for OE style 1/4 “NPT port install
- Use #0409 for radiator hose install
The DIGITAL GAUGE THERMATIC® FAN/EWP® SWITCH must be mounted inside the vehicle’s driving compartment for easy reading and quick adjustment.
- Convenient push-button control allows you to accurately set/target temperature for automatic activation of the Thermatic® Fan #1 and Fan #2 at independent temperatures when extra cooling is required.
- Simple, do-it-yourself installation instructions.
- This flexible switch can also be used to activate an Electric Water Pump and/or an Electric Booster Pump.
This new DIGITAL GAUGE THERMATIC® FAN/EWP® SWITCH complements the highly successful #0400 Combo, #0401, #0404 and #0444 Thermatic® Switches
FEATURES
- Temperature Sensor Display Range 0oC ~ 130oC (32F ~ 266F)
- Temperature Sensor Setting Range 5oC ~ 110oC (41F ~ 230F)
- Temperature Units interchangeable between oC & oF
- 12V and *24V compatible
- *For 24 Volt application: 2 x 24V Relays required, sold separately (Part #10534)
- Can detect ambient temperature (air) as standard
- Can detect coolant temperature
- Use #0465 for OE style 1/4 “NPT port install
- Use #0409 for radiator hose install
- Can detect transmission fluid temperature
- Use #0465 and requires (sourced externally)
- 1 x Female Fitting Pipe Tee 1/4' NPT
- 2 X 3/8' Barb Fitting To 1/4' NPT
- Use #0465 and requires (sourced externally)
- Independent set temperature for Fan 1 and Fan 2
- Independent control of A/C override (fan 1, fan 2 or both)
- Can be used as manual override
- Can Manually turn off Fans (press and hold Fan + A/C)
- For river crossing as example
- Led indicators for Fan1, Fan2 and A/C
- LED lights show operating condition
- See table below
- Over temperature warning with audible alarm
- See functions table below
- Audible alarm has 5min Snooze function.
- Universal 52mm gauge design.
- Built in display dimmer with headlight trigger
- Extra-long temperature sensor wires 380 cm
- Interchangeable/replicable sensor
| Specs | Part #0401 | Part #0444 & 0445 | Part #0500 | Part #8002 |
| Operating Voltage | 12 & 24 Volt | 12 Volt standard 24 Volt relays required | 12 Volt standard 24 Volt relays required | 12 & 24 Volt |
| Maximum Current | 20 Amps | 40 Amps | 40 Amps or relay rating | 12 Amps EWP® Only |
| Single Fan Control | YES | YES | YES | YES |
| Duel Fan Control | Wiring Dependant | YES | YES | Wiring Dependant |
| EWP® control | ON / OFF ONLY (USE 8002) | ON / OFF ONLY (USE 8002) | ON / OFF ONLY (USE 8002) | YES |
| EBP control | YES | YES | YES | NO |
| EWP®/EBP and Fan control | Wiring Dependant | YES | YES | EWP and Fans only |
| Single Fan/EWP®/EBP Application | All DCPL Fans, EWP® & EBPs | All DCPL Fans, EWP® & EBPs | All DCPL Fans, EWP® & EBPs | All DCPL Fans & EWP® |
| Duel Fan Application | Relay Switching Current MAX 15A | All Fans (MAX 30A Each) | All Fans | All Fans (Wiring Dependant) |
| Speed | Single Speed | Single Speed | Single Speed | Single speed Fan & Variable EWP® |
| AC Override | Wiring Dependant ( use 0404) | YES | YES Selectable Fan Override | NO |
| Sensor Wire Length | 110cm | 142cm in total (Wire from switch 112cm plus sensor connector 30cm) | 380cm | 250cm Increase to 380cm (Oct 2020) |
| Coolant Temperature Detection | YES | YES (0444 Requires #0409 or #0465) (0445 comes with 1/4" NPT Thermal Sensor) | YES (Requires #0409 or #0465) | YES |
| Duel Fan Start-Up Delay | NO | 10 Seconds | Independent set Temp | NO |
| Temperature Setting Range | 40°C To 100°C (104°F To 212°F) | 40°C To 110°C (104°F To 230°F) | 5°C To 110°C (41°F To 230°F) | 40°C To 110°C (104°F To 230°F) |
| Temperature Setting Method | Turn Knob | Push Button | Push Button | Push Button |
| Mounting position | Engine bay | Engine bay | Vehicle Cabin | Vehicle Cabin |
| Dimensions | 35mm x 58mm x 45mm | 95mm x 65mm x 56mm | Universal 52mm Gauge | 98mm x 95mm x 25mm |
| IP66 Rated | NO | YES | NO | NO |
| Temperature Display | NO | YES | YES | YES |
| Set Temperature Display | NO | YES | YES | YES |
| Fan Operation Indicator | NO | NO | YES | EWP® and Fan |
| Temperature Set Indicator | NO | NO | YES | YES |
| Fault Display | NO | NO | YES | YES |
| °C Setting | NO | YES | YES | YES |
| °F Setting | NO | YES | YES | YES |
| °C D °F Change | NO | YES | YES | YES |
| Air Temperature Detection | NO | YES | YES | NO |
| Accessories | Part #1000, 1001, 1002, 1003 | Part #1000, 1001, 1002, 1003 | Part #1000, 1001, 1002, 1003 | Part #1000, 1001, 1002, 1003 |
| Part #0400 (#0401 + #0409) | Part #0409 | Part #0409, #0465, #10534 | Thermatic® Fan | |
| Part #0422 (Duel Fan Only) | Part #0422 (Duel Fan Only) | Part #0422 (Duel Fan Only) | EWP® Header Adaptor Kit | |
| EWP® Digital Controller Combo |
OPTIONAL PARTS (SOLD SEPARATELY)
¼ NPT THERMAL SENSOR ADAPTOR KIT SUITS #0444, 0500, 8001 (PART #0465)
The Davies, Craig ¼" NPT Thermal Sensor Adaptor Kit is designed to fit a ¼ NPT Sensor to Part Number 0444 or 0500 (Digital Thermatic® Fan Switch or Gauge).
This will enable you to change the sensor type and fitment options from the 5mm diameter probe sensor provided in these kits as standard.
THERMAL SENSOR PROBE (PART #10460)
Suit Part Number 0444 - Digital Thermatic® Fan Switch Kit & 0500 - Digital Gauge Thermatic Fan & EWP Switch Kit.
It is a spare part for those customer who may have inadvertently damaged the sensor.
*According to your country's shipping and customs laws, please be aware that your order may be subject to import duties and customs fees at time of delivery. These cost are not included in your shipping fee and will need to be paid by the customer.