Martin Tripix 1200 RGB DMX control waterproof light fitting brand new in unopened box sealed. Unpacked light on the pictures is a use one only to show how look like

The Tripix 300™ and Tripix 1200™ are attractively designed IP66 rated LED strips using tricolor LEDs for superior color mixing directly at the lens. The result is an absence of color shadows and a broad color palette, including stunning whites, subtle pastels and vibrant saturated colors.

The Tripix RangeTM can be used in a variety of indoor and outdoor applications and installs in minutes using a slim IP66 cable connector.

Linear LED strip with uniform color mixing

Available in two lengths and with various beam angles

Easy installation with cable daisy chain to IP rated power supply

Features

Uniform color mixing using powerful tricolor LEDs

No color separation or shadows

Easy to control: 64 built-in programs and auto addressing

Quick installation using IP66 cabling system

Available in 300 mm (1 ft) and 1200 mm (4 ft) lengths in various beam angles

Tech Specs

Physical

Tripix™ 300 Length: 300 mm (11.8 in.) Width: 61 mm (2.4 in.) including mounting bracket Height: 82 mm (3.2 in.) including mounting bracket and DIN rail Weight: 1.2 kg (2.6 lbs.) Cable tails on fixtures: 500 mm (19.7 in.) Tripix™ 1200 Length: 1200 mm (47.3 in.) Width: 61 mm (2.4 in.) including mounting bracket Height: 82 mm (3.2 in) including mounting bracket and DIN rail Weight: 4.23 kg (9.3 lbs.) Cable tails on fixtures: 500 mm (19.7 in.) Martin™ IP66 PSU 240 W (replaces Tripix™ Power IP66) Length: 314 mm (12.4 in.) Width: 68 mm (2.7 in.) Height: 39 mm (1.6 in.) Weight: 1.5 kg (3.3 lbs.)

Dynamic Effects

Color mixing: RGB Red: 0 - 100% Green: 0 - 100% Blue: 0 - 100% Color temperature control: 2 000 - 10 000 K continuous mixing

Control and Programming

Color control modes: RGB (raw and calibrated), HSI (calibrated) HSIC (uncalibrated) Control system: DMX, stand-alone, synchronized (master/slave) Grouped pixel control options: 1 segment (Tripix™ 300), 1, 2 or 4 segments (Tripix™ 1200) DMX channels: 3 or 4 per fixture (Tripix™ 300), 3 or 4 per segment (Tripix™ 1200) DMX address setting: Martin MUM™ application running on Windows PC Protocol: USITT DMX512-A Receiver: RS-485 Firmware update: Serial upload via DMX link

Optics

Light source: RGB 3-in-1 LED, approx. 3 W per LED Total LED power: Tripix™ 300: approx 24 W, Tripix™ 1200: approx. 82 W Beam angle: Narrow as supplied, medium and wide available Minimum LED lifetime: 46 000 hours (to >70% luminous output)* *Figure obtained under manufacturer´s test conditions

Photometric Data

Tripix™ 1200, no diffuser Efficacy: 9.1 lumens per watt Half-peak angle: 20° Total output: 1440 lm Tripix™ 1200, Narrow diffuser Efficacy: 8.9 lumens per watt Half-peak angle: 24° Total output: 1440 lm Tripix™ 1200, Medium diffuser Efficacy: 5.3 lumens per watt Half-peak angle: 49° Total output: 840 lm Tripix™ 300, no diffuser Efficacy: 9.1 lumens per watt Half-peak angle: 20° Total output: 360 lm Tripix™ 300, Narrow diffuser Efficacy: 8.9 lumens per watt Half-peak angle: 24° Total output: 360 lm Tripix™ 300, Medium diffuser Efficacy: 5.3 lumens per watt Half-peak angle: 49° Total output: 210 lm Measurements made with all LEDs at 100% intensity

Construction

Housing: Aluminum Finish: Clear anodized Front cover: Flame-retardant PMMA End covers: Aluminum Mounting brackets: Aluminum Protection rating: IP66

Installation

Orientation: Any Vertical aiming: +/- 105° Fixture mounting: 35 mm DIN top-hat rail on flat surface Max, power cable length, Tripix™ Power unit to last luminaire: 30 m Max. number of fixtures connected to one Martin™ IP66 PSU 240 W: 3 x Tripix™ 1200, 3 x Tripix™ Wash, 12 x Tripix™ 300 or mixture max. 3.6 m

Connections

AC mains power input to Martin™ IP66 PSU 240 W: Hard-wired (terminal block) via cable gland Fixture-to-fixture power and data: IP66 13-pin DIN cable tail system

Electrical

AC power: 100-240 V nominal, 50/60 Hz (input to Martin™ IP66 PSU 240 W) Power output: 48 V DC (output from Martin™ IP66 PSU 240 W) Standby power: Tripix™ 300

Thermal

Cooling: Convection Maximum ambient temperature (Ta max.): 45° C Minimum ambient temperature (Ta min.): -30° C Maximum surface temperature, steady state, at 45° C ambient: 65° C (fixtures), 80° C (Martin™ IP66 PSU 240 W)

Approvals

Tripix 300 and 1200 EU safety: EN 60598-1, EN 60598-2-1 LED Safety: IEC 60825-1, IEC 62471 EU EMC: EN 55 015, EN 55 103, EN 61 000-3 US safety: UL 1598 Canadian safety: CSA C22.2 No. 250 Martin™ IP66 PSU 240 W (replaces Tripix™ Power IP66) EU safety: EN 60598-2-6, EN 61347-2-13 EU EMC: EN 55015, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1012 Canadian safety: CSA C22.2 No. 107.1 Australia/NZ: C-Tick N4241

CE ETL C US Intertek C-Tick

Included Items

Tripix™ striplight fixture Narrow diffuser (installed) Safety leaflet 2 x lengths Short DIN rail, 35 mm (1.4 in.)

Accessories

Martin™ IP66 PSU to Tripix™ System Power and Data Inserter Y-Cable: P/N 91611339 Tripix™ DMX Input Adapter Cable, backwards compatible*: P/N 11880021 Tripix™ DMX Output Adapter: P/N 91611338 Tripix™ DMX Termination Plug: P/N 91611336 Set of 8 Tripix™ Diffusers, Narrow, 304 mm (12.0 in.), installation by Martin Service only: P/N 91611329 Set of 8 Tripix™ Diffusers, Medium, 304 mm (12.0 in.), installation by Martin Service only: P/N 91611330 Set of 8 Tripix™ Diffusers, Wide, 304 mm (12.0 in.), installation by Martin Service only: P/N 91611331 Tripix™ Cable Adapter extension connector set: P/N 91611323 0.5 m Tripix™ Extension Cable: P/N 91611335 1 m Tripix™ Extension Cable: P/N 91611334 5 m Tripix™ Extension Cable: P/N 91611333 *Introduced January 2013, replaces P/N 91611337

Ordering Information

Martin™ IP66 PSU 240 W (replaces Tripix™ Power IP66): P/N 90760330 Tripix™ 300: P/N 90354520 Tripix™ 1200: P/N 90354530