MbusEasy is a affordable and easy to install device that can read
any MBUS Meter Bus M-Bus EN 13757 device (a single device or a Master device such as a central
heating measurement "antenna" or so), and can optionally send the
reading over the Internet thanks to a WiFi connection or a GSM sim
card.
MbusEasy can be configured and read with a smartphone or a PC, with just some clicks.
If used for remote reading, you can use our server to see the readings (preconfigured;
example here), or you can tell the device to use your own server/script (script called with http POST with some pre-configured parameters, this for a special version, ask us).
The unit is compact, very low power and uses normal affordable batteries: if
you set up the standard periodicity (e.g."read each 15 days") the 4
standard AA 1.5V alkaline batteries will last for their entire natural
lifetime (normally 5 years).
If you set a high frequency it would be probably better to use
4 AA 1.5V lithium batteries: the lifetime depends by the strength of
the WiFi or of the GSM net signal.
Benefits:
- easy to install, can be configured and
read with a browser on a smartphone or a PC (no special software or
special hardware required!)
- easy to install
- uses standard replaceable batteries, long life, low power consumption (does not need job to connect to 220V/mains)
- with WiFi / GSM editions, you can read at home (or everywhere there is the Internet) with a login to a website (example)
- it's a single box to be placed near the existing Meter Bus device: no plant replacement works/expenses
|
The device is about 11 x 11 x 5 cm (4 x 4 x 2") and
can be placed next to or above the meter that you want to monitor. You
just need to check that the switch is OFF, insert the batteries,
mechanically fix the unit (e.g. on the wall with some fischer, or else),
close it and power on.
Then with your PC / Smartphone you connect to the internal wifi wfeasy.com and to the web site same name, and you can configure it on screen; you can also perform and download readings.
It's really intuitive and easy to use!
(the new version 2022 has slightly different menus; we will have to update the image...)
MbusEasy Standard, RemoteWiFi, RemoteGSM
|
The Standard is the simplest and most affordable. Turn it on,
connect yourself to its internal wifi called wfeasy.com, and use the
menus. You can read a single device, and you can do a scan for Master
devices (and then read all the units).
The RemoteWiFi version can lean on an external WiFi (the data consumption is quite low, no special requirements).
It can perform and make available through the Internet the readings you set monthly, bi-weekly, or
even daily. You configure it through internal wifi wfeasy.com, you move
the switch to Off/Sleep, and it will turn on by itself to perform the
readings.
The RemoteGSM - the one sold in this EBAY page - is like the RemoteWiFi (and can also work in WiFi),
additionally it can be equipped with a GSM SIM card (given the very low
data consumption if your reading interval is low it is not even
necessary a discounted "data bundle"). You configure it with
PC/Smartphone and your browser like the RemoteWifi.
Are you ready for a affordable, efficient and easy to use MBus meter reading system? Get MbusEasy today!!
Additionally...
The product comes from Italy with regular invoice - Italian seller.