Digital
RPM 3 Mode Window Switch N3211
Intellitronix
Digital RPM 3 Mode Window Switch is ideal for nitrous
applications allowing you to activate nitrous at a predetermined RPM and have
it shut off before it reaches the peak RPM. The RPM Activated Switch with digital technology uses Push Buttons and Digital Display to program the switch and works
with 1, 2, 4, 6, 8, 10, and 12-cylinder engines with an RPM range 2000 to under
10,000 RPM.
This uniquely
designed Digital RPM 3 Mode Window Switch functions as a tachometer with high RPM
recall and features over-current protection, short-circuit protection, and
over-voltage protection. The Push Buttons and Digital Display are easy to use to
program the switch.
The Digital RPM 3
Mode Window Switch functions as a Digital Tachometer with high RPM recall
function and has three modes available to set.
Digital
Switch Mode (1 Limit):
The one
(1) limit allows the entry of one RPM value. If the RPM is over the value
entered, it will activate the switch. If the RPM registers below the entered
value, the switch will deactivate.
Window Activated
Mode (2 Limits):
The two
(2) limits allows two limits to be set. First is the low limit and second is
the high limit. If the RPM registers between the lower and higher limit, the
switch will activate. If the RPM registers outside the two limits, the switch
will deactivate.
Activated
Mode (2 Limits Bottom Entry):
This mode
functions the same as the two (2) limit window mode with the exception that
once the RPM is outside the two set window limits, it will only reactivate once
it enters the window from the low limit on the bottom side.
Other features
include:
Dimensions: 4” x 3”
RPM range 2000 to under
10,000 RPM and displays as 4 LED digits.
If you're not 100% completely satisfied, then just arrange to send it back within the return period:)