Description:
STM32F103C8T6 Core Board
STM32F103C8T6 Core Board
1.Control Chip:STM32F103C8T6
2.Operating Chip:5V
3.Extensible Interface:WIFI ESP8266/NRF24L01/WS1053 W5500 interface
4.Flash:W25X16
5.EEPROM:ATMEL24C02
Package Included:
1PC*STM32F103C8T6 ARM Minisystem Development Board STM32 Development Core Board
2.Operating Chip:5V
3.Extensible Interface:WIFI ESP8266/NRF24L01/WS1053 W5500 interface
4.Flash:W25X16
5.EEPROM:ATMEL24C02
Package Included:
1PC*STM32F103C8T6 ARM Minisystem Development Board STM32 Development Core Board
STM32F103C8T6 Controller
Kernel: ARM 32-bit Cortex ™ -M3 CPU
- Up to 72MHz operating frequency
- Single cycle multiplication and hardware division
Memory
- from 64K or 128K bytes of Flash program memory
- up to 20K bytes of SRAM
Clock, reset and power management
- 2.0 ~ 3.6 V power supply and I / O pins
- Power-on / Power-down Reset (POR / PDR), Programmable Voltage Monitor (PVD)
- 4 ~ 16MHz crystal oscillator
- Built-in factory-adjusted 8MHz RC oscillator
- Built-in calibrated 40kHz RC oscillator
- the PLL that generates the CPU clock
- 32kHz RTC oscillator with calibration function
Low power consumption
- sleep, stop and standby modes
- V BAT powers the RTC and back-up registers
2 12-bit analog-to-digital converters, 1us conversion time (up to 16)
- Conversion range: 0 to 3.6V
- Double sampling and hold function
- temperature sensor
DMA:
- 7-channel DMA controller
- Supported peripherals: timers, ADC, SPI, I 2 C and USART
Up to 80 fast I / O ports
- 26/37/51/80 I / O ports, all I / O ports can be mapped to 16 external interrupts; almost all ports can tolerate 5V signals
Debug mode
- Serial single line debug (SWD) and JTAG interface
Up to 7 timers
- 3 16-bit timers, each with up to 4 channels for input capture / output compare / PWM or pulse count and incremental encoder inputs
- 1 16-bit PWM controller with dead-zone control and emergency brake for motor control
- 2 watchdog timers (standalone and window type)
- System time timer: 24-bit self-decrement counter
Up to 9 communication interfaces
- Up to 2 I 2 C interfaces (SMBus / PMBus supported)
- Up to 2 USART interfaces (ISO7816 interface, LIN, IrDA interface and modem control) Up to 2 SPI interfaces (18Mbit / s)
- CAN interface (2.0B active)
- USB 2.0 full speed interface
CRC calculation unit, 96-bit chip unique code
Package Included:
1PC*STM32F103C8T6 Micro USB controller STM32 Development ARM Learning Board
- Up to 72MHz operating frequency
- Single cycle multiplication and hardware division
Memory
- from 64K or 128K bytes of Flash program memory
- up to 20K bytes of SRAM
Clock, reset and power management
- 2.0 ~ 3.6 V power supply and I / O pins
- Power-on / Power-down Reset (POR / PDR), Programmable Voltage Monitor (PVD)
- 4 ~ 16MHz crystal oscillator
- Built-in factory-adjusted 8MHz RC oscillator
- Built-in calibrated 40kHz RC oscillator
- the PLL that generates the CPU clock
- 32kHz RTC oscillator with calibration function
Low power consumption
- sleep, stop and standby modes
- V BAT powers the RTC and back-up registers
2 12-bit analog-to-digital converters, 1us conversion time (up to 16)
- Conversion range: 0 to 3.6V
- Double sampling and hold function
- temperature sensor
DMA:
- 7-channel DMA controller
- Supported peripherals: timers, ADC, SPI, I 2 C and USART
Up to 80 fast I / O ports
- 26/37/51/80 I / O ports, all I / O ports can be mapped to 16 external interrupts; almost all ports can tolerate 5V signals
Debug mode
- Serial single line debug (SWD) and JTAG interface
Up to 7 timers
- 3 16-bit timers, each with up to 4 channels for input capture / output compare / PWM or pulse count and incremental encoder inputs
- 1 16-bit PWM controller with dead-zone control and emergency brake for motor control
- 2 watchdog timers (standalone and window type)
- System time timer: 24-bit self-decrement counter
Up to 9 communication interfaces
- Up to 2 I 2 C interfaces (SMBus / PMBus supported)
- Up to 2 USART interfaces (ISO7816 interface, LIN, IrDA interface and modem control) Up to 2 SPI interfaces (18Mbit / s)
- CAN interface (2.0B active)
- USB 2.0 full speed interface
CRC calculation unit, 96-bit chip unique code
Package Included:
1PC*STM32F103C8T6 Micro USB controller STM32 Development ARM Learning Board
STM32F103C8T6 System Board
1.Control Chip:STM32F103C8T6 Minimum System Board
2.Operating Chip:5V
3.Extensible Interface:WIFI ESP8266/NRF24L01/WS1053 W5500 interface
4.Flash:W25X16
5.EEPROM:ATMEL24C02
2.Operating Chip:5V
3.Extensible Interface:WIFI ESP8266/NRF24L01/WS1053 W5500 interface
4.Flash:W25X16
5.EEPROM:ATMEL24C02
Package Included:
1PC*STM32F103C8T6 ARM Minisystem Development Board STM32 Development Core Board
1PC*USB Cable
1PC*Dupont Cable
1PC*STM32F103C8T6 ARM Minisystem Development Board STM32 Development Core Board
1PC*USB Cable
1PC*Dupont Cable
Cortex-M3 STM32F103C8T6
1. Chip board STM32F103C8T6
2. Board JTAG interface and reset button
3. The onboard crystal 32.768KHZ and 8MHZ
4. With 5V to 3.3V chip AMS1117-3.3
5. With a group of UART serial interfaces
6. All I/O all the leads, and mark the I/O name
7. On-board Mini USB interface, you can give the board power supply and USB communication
8. Board size 52.1 (mm) x35.5 (mm)
Package:1x ARM Cortex-M3 STM32F103C8T6 STM32 Minimum System Development Board
1. Chip board STM32F103C8T6
2. Board JTAG interface and reset button
3. The onboard crystal 32.768KHZ and 8MHZ
4. With 5V to 3.3V chip AMS1117-3.3
5. With a group of UART serial interfaces
6. All I/O all the leads, and mark the I/O name
7. On-board Mini USB interface, you can give the board power supply and USB communication
8. Board size 52.1 (mm) x35.5 (mm)
Package:1x ARM Cortex-M3 STM32F103C8T6 STM32 Minimum System Development Board
STM32F103C8T6 Minimum System
Brand new and high quality.
Model: STM32F103C8T6.
Core: ARM 32 Cortex-M3 CPU.
Debug mode: SWD.
72MHz work frequency.
64K flash memory, 20K SRAM.
2.0-3.6V power, I/O.
Reset(POR/PDR).
4-16MHz crystal.
Micro USB connector , you can give the board power supply and USB communication.
Size:5.3cm x 2.2cm.
Package Included:
1PC*STM32F103C8T6 ARM STM32 Minimum System Development Board Module For Arduino
Brand new and high quality.
Model: STM32F103C8T6.
Core: ARM 32 Cortex-M3 CPU.
Debug mode: SWD.
72MHz work frequency.
64K flash memory, 20K SRAM.
2.0-3.6V power, I/O.
Reset(POR/PDR).
4-16MHz crystal.
Micro USB connector , you can give the board power supply and USB communication.
Size:5.3cm x 2.2cm.
Package Included:
1PC*STM32F103C8T6 ARM STM32 Minimum System Development Board Module For Arduino
STM32F103C8T6 IC
Core processor: ARM ® Cortex ™-M3
Core Size: 32bit
Processor speed: 72MHz
Input / Output: 37
Program Memory capacity: 64KB (64K x 8)
Program Memory Type: Flash
Voltage - Power supply: (Vcc / Vdd) 2 V ~ 3.6 V
Data Converters: A / D 10x12b
Oscillator Type: External, Internal
Operating temperature: -40 ° C ~ 85 ° C
Package / Case :48-LQFP
Input / Output lines: 32
Package Included:
1PC*STM32F103C8T6 STM32F103 STM32 LQFP48 MCU ARM ST IC
Core processor: ARM ® Cortex ™-M3
Core Size: 32bit
Processor speed: 72MHz
Input / Output: 37
Program Memory capacity: 64KB (64K x 8)
Program Memory Type: Flash
Voltage - Power supply: (Vcc / Vdd) 2 V ~ 3.6 V
Data Converters: A / D 10x12b
Oscillator Type: External, Internal
Operating temperature: -40 ° C ~ 85 ° C
Package / Case :48-LQFP
Input / Output lines: 32
Package Included:
1PC*STM32F103C8T6 STM32F103 STM32 LQFP48 MCU ARM ST IC