Note: 

1. If you need full set , pls buy remote and relay receiver sepertely;

2. we do not put battery because of the shipping problem;

(The transmitter works with 1pc 27a12v battery)

note:

1. The relay switch is a default on design. -

Why do we need to "default on"?

-Sometimes the power off, or we lost the remote control, we can still use traditional switches to turn on the lights. 

2. self-locking working mode: click on the transmitter to open,

Click again to close  . 

3.Do not interfere with each other-even if your neighbor has the same transmitter, he cannot control your switch

4. This switch is 10A AC 110V-220V, which can be used for a variety of appliances, not only for lighting.

5. If you want to add more transmitters or reset the operating mode, please follow the pairing steps below.

How to clear the password:

* Click the pairing button on the panel 8 times, the button flashes, and the password is successfully cleared.

How to set the working mode:

First turn on the switch, the red indicator light is on

* Self-locking: Press the "Pairing Button" twice, the blue indicator light flashes, then press the transmitter button, the blue indicator flashes quickly, and then goes out.

Receiver specifications:

-Working mode: Jog lock (instantaneous) / self-locking / interlock

-Compatible with any lamp, such as halogen / incandescent / CFL / fluorescent / LED

-433MHz, AC85-260V

Used everywhere.-Fluorescent / LED lights

Load: <500W- Incandescent load: <1000W-

Switch size: 90 * 40 * 20 (mm)

-Encrypted connection, no signal interference between switches

-Distance: 10-30 meters, via wire

-Transmitter battery: 27A 12V battery (not included)

-TACT touch screen: LED indicator

-For home lights