Technical Specification
Product | Hex Bolt |
Head Type | Hex Head |
Bolt Size | M20 (20mm) |
Thread Pitch | 2.50mm |
Thread Type | Coarse |
Length - from under the head | 120mm |
Thread Length APPROX | 46mm |
Bolt Diameter APPROX | 19.67 ~ 20.00mm |
Across Flats APPROX | 29.67 ~ 30.00mm |
Across Centres APPROX | 33.53 ~ 34.60mm |
Head Height APPROX | 12.28 ~ 12.72mm |
Material | High Tensile Carbon Steel |
Class | 8.8 |
Brand - Our Discretion | Hobsons / Bremick / Brighton Best |
Pack Quantity | 2 |
Product Information
- Hex Bolt has a hexagon head, part thread and part shank and is used to fasten metal to metal, metal to timber.
- If thread length is critical there is a cross over where a hex bolt could be fully threaded. This is due to a gradual change in the fastener industry due to wholesalers wanting to reduce their stock holdings, now they only carry the shorter lengths as fully threaded. Therefore, if thread length is critical, always check our specifications or contact us prior to ordering.
- Used to fasten objects together by inserting the bolt from the one end and securing it with either a nut on the other end or into a taped hole. A nut and bolt combination compresses everything together
- To tighten the nut requires a socket and wrench or a spanner, If, while tightening the nut, the bolt turns with it, a second spanner or wrench is required to hold-on to the bolt while the nut is tightened
- Zinc Plated is the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of zinc is applied by either electroplating or mechanically. It is intended to be used internally. Whilst some people use it externally it isnt recommended if corrosion is a concern. If you want a fastener that will withstand the outdoor elements choose from our Stainless steel range
- Metric fastenings are referred to as classes, imperial fastenings are referred to as grades. Both have marking systems that make it possible to determine grade and class. An example is a 1/2" UNC bolt with 5 lines on the head is grade 8 and 3 lines is grade 5, both are regarded as high tensile. Metric bolts are slightly different, if it has 4.6 then it is mild steel and 8.8 is high tensile. The markings on a stainless fastener indicate the grade of material and strength, e.g. material G304 grade will have one of the following markings: A2-70, G304, A2, 304 and G316 grade stainless will have one of the following: A4-70, G316, A4, 316
- Photos are of the product but may not be the drive size or length, always refer to the title and description prior to ordering
- Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide
- Note: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Manufactured to AS1110.1
- If you are looking for another type, diameter, length, width, material or pack size use the store search box on our store page
- Need help? message us through eBay
- Price Includes GST, Tax Invoice And Free Delivery Anywhere In Australia
BOLTS - METRIC
BOLTS - IMPERIAL
SOCKET SCREWS - METRIC
SOCKET SCREWS - IMPERIAL
MACHINE SCREWS - METRIC
MACHINE SCREWS - IMPERIAL
NUTS - METRIC
NUTS - IMPERIAL
WASHERS - METRIC
WASHERS - IMPERIAL
HARDWARE
TOOLS
NUTSERTS - FLANGE
NUTSERTS - COUNTERSUNK
NUTSERTS - RUBBER / WELL NUTS
FASTENER KITS
METAL SCREWS - BUTTON
METAL SCREWS - COUNTERSUNK
METAL SCREWS - DECKING
METAL SCREWS - FLAT
METAL SCREWS - HEX
METAL SCREWS - WAFER
TIMBER SCREWS - BUGLE BATTEN
TIMBER SCREWS - BUTTON
TIMBER SCREWS - CHIPBOARD
TIMBER SCREWS - COUNTERSUNK
TIMBER SCREWS - DECKING
TIMBER SCREWS - HEX
TIMBER SCREWS - PARTICLEBOARD
TIMBER SCREWS - PLASTERBOARD
TIMBER SCREWS - WAFER
SELF TAPPERS - BUTTON SECURITY
SELF TAPPERS - CSK PHILLIPS
SELF TAPPERS - CSK SECURITY
SELF TAPPERS - MUSHROOM PHILLIPS
SELF TAPPERS - PAN PHILLIPS
MASONRY - DROP IN ANCHORS
MASONRY - HOLLOW WALL ANCHORS
MASONRY - NAIL IN / PIN ANCHORS
MASONRY - SCREWS BOLTS
MASONRY - SLEEVE ANCHORS
MASONRY - SPRING TOGGLES
MASONRY - WALL MATES
MASONRY - WALL PLUGS
MASONRY - WEDGE ANCHORS
POP RIVETS - DOME
POP RIVETS - COUNTERSUNK
POP RIVETS - LARGE FLANGE
ALL THREAD
PINS & CLIPS
DRILLING
DRIVER BITS