THIS AUCTION  IS FOR LOT OF BRAND NEW ----  1-Piece Guitar Parts Linear type Potentiometers  B-50k -ohm push-pull switch volume control  pots.

 
Generally, 500K-ohm pots are used with humbuckers and 250Ks are used with single-coil pickups. You can use any value you like, but a 250K will give a slightly warmer tone than a 500K pot. The 250K pot bleeds off some of the high frequencies to ground. A 1 Meg-ohm pot bleeds off even less than a 500K pot, so if you want to hear your guitar "wide open" you may want to try one.

1-meg pots are also ideal for piezo pickups, as the ultra high impedance piezo element is more adversely effected by conventional, lower-value pots than magnetic pickups. 

Dual-function pots pull up to activate an on/on double-pole double-throw mini switch.

Can be used as a normal volume or tone control, or control pickup phasing, series/parallel switching, coil-taps, and more. 

Shaft diameter	6mm split shaft, coarse knurling
Thread	M7 x 0.75
Threaded portion height	3/8"	(9.52mm)
Required mounting hole diameter	9/32"	(7.14mm)
Required body cavity depth	1-1/8"	(28.58mm)
Two mounting nuts, flat washer  included