- MagCAD Wahoo Elemnt Tether, suitable for both the Elemnt Bolt (V1) and Elemnt Roam (V1) devices.
- Adjustable lanyard for extra flexibility and tidiness.
- Extra security and convenience for your GPS device.
Please note: This tether does NOT fit the new Roam (V2).
The Wahoo Roam V2 is pictured for reference only and not supplied.
Supplied
1x 3D printed Nylon anchor.
1x Adjustable lanyard 200mm long.
1x M2 x 6mm countersunk screw.
Overview
A tether for the Wahoo Elemnt Bolt (V1) or Elemnt Roam (V1) GPS computers. Attaches to the recess on the back of your device with the M2 screw (provided). The lanyard can then be secured to your handlebars before each ride, reducing the risk of accidently dropping your device.
Application
Place the Nylon anchor into the recess of your device and secure with the countersunk M2 screw provided. A Pozidriv or cross headed screwdriver should be used to install the screw without overtightening.
Note the first time you install a tether into your Wahoo device the screw will cut a thread into the plastic. Therefore, you should apply some forward pressure at the same time as rotating the screw.
Before each ride loop the lanyard around your handlebars and install the computer onto its mount. The lanyard is 200mm in length; long enough to suit the majority of installations without having lots of extra length on display. The adjuster gives you an alternative way of securing to your bike as well as a way of keeping the cords tidy.
Material
Unlike our other MagCAD Mounts which are SLS 3D printed, the Nylon anchor in these MagCAD tethers is SLA printed. Following the process of SLA (Stereolithography Apparatus) on industrial size printers, costing anything above £100k, the resulting plastic has fantastic resolution and refinement. The surface finish is smooth and shiny with a grey colour and the performance of the material comparable to injection moulded parts.