Feature:
Main Drive Shaft Is Flexible
Easy Use And Self Centering
Adjustable Honing Pressure To Suit The Particular Application
Suitable For Use With An Electric Or Air Drill
Convenient storage
Specifications:
Dimension:2 to 7 in. Diameter range (51 – 177 mm)
Setting:2 through 4 in. and 4 through 7 in.
Stones:3 – 220 Grit
Length of Stone:7.62cm (3 inches)
Operation:
Step 1.
Spray lubricant on the stones or the cylinder bores. Get the hone set up on the drill.
Step 2.
Insert the engine hone into the cylinder and run the drill at low speed between 300-700 RPM. Move the hone up and down around once a second.
Don't push or pull the stones more than 3/4 inches out of the cylinder. Don't run the engine hone for more than 3 mins.
Step 3.
After honing, use a paper towel to wipe out the inside of cylinder.
Honing Stones
Medium 220 grit stones enable faster and smoother removal of deposits and corrosion in engine, brake and all types of cylinders.
Flexible Shaft
The honing tool with self-centering flexible shaft does the deglazing job efficiently.