A smart diagnostic tool that will help car owners solve daily problems, save thousands of money, drive safely.
THINKSCAN Plus SEVEN can diagnose scan most common problems for 16 Systems.
- 1. Read Fault Codes on the 16 systems.
- 2. Read Live Data on the 16 systems.
- 3. Read System Information on the 16 systems.
- 4. Erase Fault Codes after you repair the car to turn off the warning lights on the 16 systems.
The tool can scan the systems to generate report, so you can know the conditions of your cars. It will help you find problems, locate malfunctions, so you can fix the problems to avoid major problems.
The 7 big Systems are: Engine+ABS+SRS Airbag+BCM+TCM+IC+AC Systems
- Engine system Diagnostic:
You can diagnose the engine system, find out why the [CHECK ENGINE] or [engine Management] light is on. It supports all 10 OBDII test modes, such as live data, O2 sensor test, component test and more;read and clear the engine error codes, find out the exactly problem, repair it, and turn off the MIL engine light. It can read deeper information of the engine health condition, help you drive safely, and make sure your car comply MOT regulations.
- ABS system Diagnostic:
ABS (Anti-Lock Brake System) is one of the most important systems of a car. This tool can help you know the condition of ABS, read fault codes, and erase codes after you repair the problem to turn off ABS warning light from dashboard.
- AMT: Transmission System Diagnostic :
Transmission is a most Precise Instrument on cars, and of course very expensive. This Diagnostic Scanner can read/clear codes and view live data retrieve the error information from AT.
- SRS Airbag system Diagnostic:
Safety Restraint System. The SRS warning light sometimes lights up on dashboard, maybe because of we move the seat, or the connectors get lose, maybe because of other serious cause. So it is of great significance for us to find the cause, and to solve it to turn off the SRS warning lights. This tool will help you.
- Vehicle Body System(BCM) Diagnostic:
- Interior and Exterior Lighting Control System,
- Central Door Lock System,
- Power Window Machine System,
- Smart Wiper System,
- keyless System,
- Power Steering Column System,
- Power Seat System,
- Auxiliary Heating System,
- Smart Air Conditioner System
- A/C system Diagnostic
- IC system Diagnostic
Compatibility for 7 Systems Diagnosis: Vehicles use 12V battery, OBD2 / EOBD Compliant.
- If you are personal car owner, just need to do few carsm please send cars' infomation, we will check for you for free.
- If you are a mechanic or need to do a lot of cars, please contact us, we will provide compatible lists for you.
1. When the ABS System contains air, the ABS bleeding function must be performed to bleed the air to restore ABS brake sensitivity.
2. If the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line, or brake fluid is replaced, the ABS bleeding function must be performed to bleed the ABS.
1. If the brake pad wears the brake pad sense line, the brake pad sense line sends a signal sense line to the on-board computer to replace the brake pad.
After replacing the brake pad, you must reset the brake pad. Otherwise, the car alarms.
2. Reset must be performed in the following cases:
a) The brake pad and brake pad wear sensor are replaced.
b) The brake pad indicator lamp is on.
c) The brake pad sensor circuit is short, which is recovered.
d) The servo motor is replaced.
DPF regeneration is used to clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode (such as high temperature heating combustion, fuel additive or catalyst reduce PM ignition combustion) to stabilize the filter performance.
DPF regeneration may be performed in the following cases:
a) The exhaust back pressure sensor is replaced.
b) The PM trap is removed or replaced.
c) The fuel additive nozzle is removed or replaced.
d) The catalytic oxidizer is removed or replaced.
e) The DPF regeneration MIL is on and maintenance is performed.
f) The DPF regeneration control module is replaced.
After the ECU or injector is replaced, injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identify injectors to accurately control fuel injection.
This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, in which the original low battery fault information will be cleared and battery matching will be done.
Battery matching must be performed in the following cases:
a) Main battery is replaced. Battery matching must be performed to clear original low battery information and prevent the related control module from detecting false information. If the related control module detects false information, it will invalidate some electric auxiliary functions, such as automatic start & stop function, sunroof without one-key trigger function, power window without automatic function.
b) Battery monitoring sensor. Battery matching is performed to re-match the control module and motoring sensor to detect battery power usage more accurately, which can avoid an error message displaying on the instrument
panel.
