RA 0109
Features:
Amalgam polishing
kits RA 0109 Used for low-speed
Kit Profile:9 rubber polishers
1. RF 320 2 Black
cup-shaped polisher
2. RF 341 2 Black
knife wheel polisher
3. RF 313 2 Black
pointed polisher
4. RF 320 4 Brown
cup-shaped polisher
5. RF 341 4 Brown
knife wheel polisher
6. RF 313 4 Brown
pointed polisher
7. RF 320 5 Blue
cup-shaped polisher
8. RF 341 5 Blue
knife wheel polisher
9. RF 313 5 Blue
pointed polisher
Followed is the
specific steps. (Note: Each step should be used at the recommended speed.)
First, adjust the
nose to recommended speed,
the polishers
should be in the best condition and can achieve the best polishing effect.
First step:
recommended speed:30000-35000;
According to
different parts,you can choose 1, 2 and 3 different shape polishers for rough
polishing the surface.
Second step:
recommended speed:30000-35000;
According to
different parts,you can choose 4, 5 and 6 different shape polishers for fine
Third step:
recommended speed:30000-35000;
According to
different parts,you can choose 7, 8 and 9 different shape polishers for super-fine
polishing.
RA 1112
Usage:
Soft silicone
polishers and diamond polishers for composite materials, preparation and high
gloss polishing
Instructions:
1. For dental
clinic low speed bent hand piece.
2. Don’t use the
products to sharp part,, or it will damage the abrasive material.
3. Do not need to
use with the polishing paste, do not need to apply too much pressure, Touch
intermittent natural abrasive
Steps:
1. Red ring (white ceramic grinder)= 1st step: Removing and contouring. Rec.
10,000-12,000 rpm.
2. Yellow ring (blue silicone polisher)= 2nd step: Smoothing and pre-polishing.
Rec.10, 000-12,000 rpm.
3.White ring (light pink diamond polisher)= 3rd step: High gloss polishing.Rec
7,000-10,000 rpm
RA 2112
Feature
Soft silicone
polishers and universal diamond polishers for porcelain
1. For dental
clinic low speed bent hand piece.
2. Don’t use the
products to sharp part, or it will damage the abrasive material.
3. Do not need to
use with the polishing paste, do not need to apply too much pressure,
Touch intermittent
natural abrasive.
Steps:
1、Red ring (white ceramic grinder) = 1st
step: Removing and contouring. Rec. 10,000-12,000 rpm.
2、Red ring (pink silicone polisher) = 2nd
step: Smoothing and pre-polishing. Rec.10, 000-12,000 rpm.
3、Yellow ring (yellow diamond polisher) =
3rd step: High gloss polishing. Rec 10,000-12,000 rpm.
RA 3112
Features:
Usage:
Clinical intraoral
high gloss polishing for zirconia case temper, form repair and after repair.
Instructions:
1. For dental
clinic low speed bent hand piece.
2. Don’t use the
products to sharp part,, or it will damage the abrasive material.
3. Do not need to
use with the polishing paste, do not need to apply too much pressure, Touch
intermittent natural abrasive
Steps:
1.Red ring light ceramic
diamond grinder= 1st step: Removing and contouring. Rec10,000-15,000rpm.
2.Red ring grey
rubber diamond polisher= 2nd step: Smoothing and pre-polishing.
Rec15,000-20,000rpm.
3.Yellow ring
yellow rubber polisher= 3rd step: High gloss polishing. Rec.10,000-15,000rpm.
RA 0309
Feature:
1 KIT in total
Kit Profile:3 ceramic polishers and 6 silicone rubber
polishers
1. CW 306 4 White
pointed polisher
2. CW 311 4 White
cone polisher
3. CW 351 4 White
ball polisher
4. SH 320 3 Pink
cup-shaped polisher
5. SH 341 3 Pink
knife wheel polisher
6. SH 313 3 Pink
pointed polisher
7. SH 320 4 Light
blue cup-shaped polisher
8. SH 341 4 Light
blue knife wheel polisher
9. SH 313 4 Light
blue pointed polisher
Followed is the
specific steps. (Note: Each step should be used at the recommended speed.)
First, adjust the
nose to recommended speed, the polishers should be in the best condition and
can achieve the best polishing effect.
First step:
recommended speed:15000-20000;
According to
different parts,you can choose 1, 2 and 3 different shape polishers for rough
polishing the surface.
Second step:
recommended speed:15000;
According to
different parts,you can choose 4, 5 and 6 different shape polishers for fine
polishing.
Third step:
recommended speed:15000;
According to
different parts,you can choose 7, 8 and 9 different shape polishers for
super-fine polishing.
HP 0412
Feature:
Kit Profile:12 silicone polishers
1.SK 213 2 Black
pointed polisher*2
2.SK 214 2 Black
pointed polisher
3.SK 202 2 Black
bullet polisher
4.SK 213 3 Green
pointed polisher*2
5.SK 214 3 Green
pointed polisher
6.SK 202 3 Green
bullet polisher
7.SK 213 5 Yellow
pointed polisher*2
8.SK 214 5 Yellow
pointed polisher
9.SK 202 5 Yellow
bullet polisher.
Followed is the
specific steps. (Note: Each step should be used at the recommended speed.)
First, adjust the
nose to recommended speed,
the polishers
should be in the best condition and can achieve the best polishing effect.
First step:
recommended speed:15000-20000;
According to
different parts,you can choose 1,2 and 3 different shape polishers for
rough
Second step:
recommended speed:10000-15000;
According to
different parts, you can choose 4,5 and 6 different shape polishers for fine
Third step:
recommended speed:8000-12000;
According to
different parts, you can choose 7,8 and 9 different shape polishers for
super-fine
HP 0312
Feature
Kit Profile:12 silicone polishers
1. SH 212 2 *2
White pointed polisher
2. SH 241 2 *2
White knife wheel polisher
3. SH 232 2 *2
White wheel polisher
4. SH 212 3 Pink
pointed polisher
5. SH 241 3 Pink
knife wheel polisher
6. SH 232 3 Pink
wheel polisher
7. SH 212 4 Light
Blue pointed polisher
8. SH 241 4 Light
Blue knife wheel polisher
9. SH 232 4 Light
Blue wheel polisher
Followed is the
specific steps. (Note: Each step should be used at the recommended speed.)
First, adjust the
nose to recommended speed, the polishers should be in the best condition and
can achieve the best polishing effect.
First step:
recommended speed:25000;
According to
different parts,you can choose 1, 2 and 3 different shape polishers for rough
polishing the surface.
Second step:
recommended speed:15000-30000;
According to
different parts,you can choose 4, 5 and 6 different shape polishers for fine
Third step:
recommended speed:10000-20000;
According to
different parts, you can choose 7, 8 and 9 different shape polishers for
super-fine.
&
RA
0304
Feature: This
can be autoclavable,suitable for disinfection of high temperature at 135 ℃
without package box, conform to modern clinical requirement. Model: RA 0304 Package:4pcs/kit Net weight:25.5g Size: 7*4.1*2.3cm Material: silicone polishers Used for Composite Used for Handpiece type: low-speed contra handpiece
Includes: 2pcs white silicone polishers:SH3132, SH3202 2pcs blue silicone polishers:SH3134, SH3204
Usage: Soft silicone polishers for porcelain
Instructions: 1. For dental clinic low speed bent hand piece. 2. Don’t use the products to sharp part, or it will damage the abrasive
material. 3. Do not need to use with the polishing paste, do not need to apply too much
pressure, Touch intermittent natural abrasive
Followed is the specific steps. (Note: Each step should be used at the
recommended speed.) First, adjust the nose to recommended speed, the polishers should be in the
best condition and can achieve the best polishing effect. 1. White silicone polishers = 1st step: Smoothing and pre-polishing. Rec.
10,000-15,000 rpm/min. 2. Blue silicone polisher = 2nd step: High gloss polishing. Rec.10, 000-12,000
rpm/min.
&
RA
Description:
Dental
rotary grinding and polishing instruments
1. Diamond impregnated 3-stage polishing
system Coarse/Medium/Fine
(1.
Smoothing. 2. Pre-polishing. 3.High-gloss polishing)
2.Best
results, high efficiency
3.Applicable
on composite,ceramic and Zircon
4.Recommend
speed:7,000-12,000 rpm/min
Package:
6pcs/set
&
CW1064/CW1114/CW1514
Flame
shape/Cone shape/Round shape
Aluminum
Oxide
Recommended
R.P.M:7,000-10,000/min
Special
for dental clinic metal,resin and porcelain
12pcs/pack
&
FG
0413
Description:
Silicone
polisher impregnated with high quality abrasives
For
pre-polishing
For
amalgams, precious alloys and non-precious alloys
Recommended
speed:7,000-30,000rpm/min
Head
size:3*7mm
Total
length:23mm
Shank
diameter:1.6mm
Package:12pcs/box
&
CD2123/CD2023/CD0123/CD0093
Feature:
1.Ceramic
bonded grinder with diamond
2.Maintains
shape during application
3.Excellent
durability
4.Heat
resistant
5.Used
for zirconia inner crown,porcelain tooth surface and crown
6.Fast
finishing dry grinding without water cooling
7.Efficiently
grinding,polishing and precisely finishing
Specification:
Shank
diameter:2.35mm
Grit:
Medium
CD2123 size:4x10.5mm
Recommended speed:20,000-35,000r/min
CD2023 size:5x12mm
Recommended speed:20,000-35,000r/min
CD0123 size:22x2mm
Recommended speed:15,000-30,000r/min
CD0093 size:22x4.5mm
Recommended speed:15,000-30,000r/min
Package:
1PC/Box
&
Five
sizes:
Red:Super
coarse
Blue:Medium
coarse
Gray:Fine
Yellow:Extra Fine
White:Ultra Fine
Description:
1.High
quality dental laboratory rubber diamond polisher
2.Especially
suitable for porcelain/ zirconia restorations
3.High
diamond concentration for more efficiency
4.Makes
glazing unnecessary
5.Recommended
R.P.M:15,000-25,000/min
10,000-20,000/min
Package:1pc/pack
&
PB-330
Features:
Latch
Type (RA)
Used
for stain removal and polishing
Prepares
surface for sealant and orthodontic procedures
100
brushes per box
Material:
Colorful Nylon
Flat
Type
Single
use
For
professional dental application only
Hard
plastic storage box included
&
345
220 045/350 220 045
Description:
Diameter:22mm
Coating:0.45mm
Recommended
R.P.M: <25,000
r/min
Divide,separate,fabricate,contour,shape
of dental restorative materials,for ceramic, gold, steel, etc.
Double
side diamond cutting fast and good elasticity for separating and contouring of
ceramics, acrylics and plaster, flexible, with good vision result,high material
reduction and smooth grinding performance.
Package:
15pcs/box
&
A102F
Description:
USES:
used for polishing and fine polishing metal alloy
Note:
please use within the recommended speed security, can achieve the best results
Particle
size grit : Coarse Mid
Recommended
speed: R.P.M: 20000-30000 / min
Specification
size Φ * L (mm) : 22 * 3
Color:
Green
100%
brand new and high quality
Packing
list: 100 Pieces Rubber Polishing Wheel per Box
&
Features:
1.
Model: 6400601
2.
Head material: zirconium oxide (ZrO2),diameter 6mm for working part.
3.
Shank material: high strength stainless steel, diameter 2.35mm.
4.
Max rotate speed: 10000-15000 r.p.m
5.
Usage:For HP low speed micro motor
6.
Applicable polishing material:
resin, gypsum
etc. non-metallic material.
7.
Recommended polishing rotate speed:
for gypsum material: 10000-15000 r.p.m
for resin tooth base plate :15000-25000
r.p.m
Advantages:
Compared
with tungsten steel polisher,
zirconium
oxide polisher has following advantages:
1.
Antibacterial ;
2.
No dogging;
3.
Resistance of acid. alkali an heat;
4.
Not easy to produce high temperature.
5.
Good abradability.
6.
Excellent durability and cutting performance
&
ISO
272
Bullet
Shape- Spiral Cut
Flute
Size: Φ6.00mm
Overall
Length:51.00mm
Shank
hank-HP104 (2.35mm)
Material:
Zirconia Ceramic
Model
No. 6402501
ADVANTAGES:
1.
Antibacterial ;
2.
No dogging;
3.
Resistance of acid. alkali an heat;
4.
Not easy to produce high temperature.
5.
Good abradability.
6.
Excellent durability and cutting performance
NOTES:
1.
Check dental burs before use;
2.
Always wear eye-protective safety glasses;
3.
For professional use only;
4.
Do not use if it is dropped;
5.
Keep out of reach of children;
6.
Disinfect dental burs after use
&
PB-370
Used
for stain removal and polishing
Prepares
surface for sealant and orthodontic procedures
100
brushes per box
Material:
White Nylon
Bowl
Shape
Single
use
For
professional dental application only
Hard
plastic storage box included
Package
Including: 1 Pack Polishing Brush(100 pcs/Bag)
|