You may also like
3.7V 400mAh 502535 Li Lithium Polymer ion Battery with 2.0mm JST Connector
Item | Description | Dimension and specification | Dimension and specification |
T | thickness | 5mm(max) | 0.20inch(max) |
W | width | 25mm(max) | 0.99 inch(max) |
L | length | 35mm(max) | 1.38 inch(max) |
L1 | line | 70mm(minimum) | 2.75inch(minimum) |
JST Connector(if you need other size,please contact us) | Positive/negative/no terminal | PH2.0-2P | PH2.0-2P |
Use Attentions
Connecting Wiresccc
Red: connect to “+”
Black : connect to “—”
Use Attentions
Warnings
1 Do not expose to, dispose of the battery in fire.
2 Do not put the battery in a charger or equipment with wrong terminals connected.
3 Avoid shorting the battery.
4 Avoid excessive physical shock or vibration.
5 Do not disassemble or deform the battery.
6 Do not immerse in water.
7 Do not use the battery mixed with other different type or model batteries.
8 Keep out of the reach of children.
Storage
1, The Li-ion battery pack should be stored in a cool, dry and well-ventilated area, and should be far from the fire and the high temperature.
2, The battery should store in the product specification book stipulation temperature range, the best storage temp. is 25±5℃. The best humidity is 60±15%.
3, The battery should be stored within room temperature, and charged to 40%~60% electric quantity（3.85V）. In order to avoid over-discharge, we suggest charge and discharge the batteries every three months.,Then charge to40%~60%electric quantity(3.85V).
Transportation
1 Do not mix the battery products with other car gos.
2 Do not immerse the battery products in water or allow it to get wet.
3 Do not over 7 layers staking and upside-down.
4 The highest temperature in transportation is lower than 65℃.
Charge
1 Battery must be charged in appropriate charger only.
2 Never use a modified or damaged charger.
3 Do not leave battery in charger over 24 hours.
4 Charging current: Can not surpass the biggest charging current which in this specification book stipulated.
5 Charging voltage: Does not have to surpass the highest amount which in this specification book stipulated to decide the voltage.
6 Charge temperature: The battery must carry on the charge in the ambient temperature scope which this specification book stipulated.
7 Uses constant current and constant voltage way charge. PLS connect the positive and negative terminals in right way, or the battery may be damaged.
Discharge :
1 The discharging current should not surpass the biggest discharging current this specification book stipulation, The large discharge current can cause heat and lower capacity.
2 Discharge temperature: The battery discharge must carry on in the ambient temperature scope which this specification book stipulated.
3 Over-discharge: After short time over discharge, then charge immediately won’t damage the battery. But the battery will be damaged for being long time over discharged. During long-term storage, the battery may be within over-discharging condition for self discharge. To prevent the occurrence of over discharging, the battery should maintain the certain capacity when storage.
Handling of Cells
1 Soft Al foil
●Don’t strike battery with any sharp edge parts
●Trim your nail or wear glove before taking battery
●Clean worktable to make sure no any sharp particle
2 Sealed edge may be damaged by heat above 100°C, bend or fold sealed edge.
3 Handling of Tabs
The battery tabs are not so stubborn especially for aluminous tab.
Do not bend tabs unnecessarily.
4 Tab Connection
Ultrasonic welding or spot welding is recommended for LIP tab connection method.
Battery pack should be designed that shear force are not applied to the LIP tabs.
If apply manual solder method to connect tab with PCM, below notice is very important to ensure battery performance:
n The solder iron should be temperature controlled and ESD safe;
n Soldering temperature should not exceed 370°C;
n Soldering time should not be longer than 3s;
n Soldering times should not exceed 5 times, Keep battery tab cold down before next time soldering;
n Directly heat cell body is strictly prohibited, Battery may be damaged by heat above approx. 100°C
Special statement
All the items have enough number in our store. If you need more of them, please contact us. And if you need other parts not in our listing, please contact us too. We have a large variety printer accessories, and some of them are not listed. Just send a message to contact us, we will help you to find the item you need.
SHIPPING & HANDLING
1.Int'l Post Airmail:
Fixed fee for Shipping & Handling, including packing, warehouse, distribution, order handling and processing costs. Item will be shipped to winning Buyers within 24 hours upon receiving the payment. The parcel with item will be shipped from Hong Kong or China by Flat Air Mail or Registered Air Mail.
The delivery time usually takes 1-2 weeks (max 3 weeks). Buyers are responsible for additional COD charges, VAT, Customs fees, and import duty (if any).
Please understand the shipping charge covers many other costs besides actual shipping cost, like stock fees, human resources, paypal fees, ebay final value fees, listing fees, insurance fees, packaging material fees, handling fees and ect. Please give us a high rate on shipping charge so our business can continue.
2. Combined Shipping:
Worldwide | 1st item | Combined Shipping |
Airmail 1-2 Weeks | Shipping free | Shipping free |
You can combine all your items within 14 days of first won item. One payment must be made for all items at one time, so that shipping & handling discount may be given.
PAYMENT METHODS
We accept Paypal ONLY. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
Payment should be made within 14 days since the winning of the first item.
Non-paying winners will be reported to eBay. Serious bidders only please. Please email us with any questions you may have during the transaction.
TERMS OF SALES
Customer satisfaction is our top goal. All products are quality checked. They are in good condition when shipped to our customers. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 30 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without communication with us. Please allow max 2 business days for us to response.
CONTACT US
Please use "Ask Seller a Question" link to contact us for any queries. We normally reply to every message within 24 hours.
3.7V 400mAh 502535 Li Lithium Polymer ion Battery with 2.0mm JST Connector
Nominal Capacity(mAh):400
Nominal Voltage(V):3.7
WH:1.48
Cutoff Voltage(V):2.7
Weight(g):9.5
Thickness(±0.2mm):5
Width(±0.5mm):25
Length(±0.5mm):35
plug(2mm):2
3.7V 400mAh 502535 Li Lithium Polymer ion Battery with 2.0mm JST Connector
Nominal Capacity(mAh):400
Nominal Voltage(V):3.7
WH:1.48
Cutoff Voltage(V):2.7
Weight(g):9.5
Thickness(±0.2mm):5
Width(±0.5mm):25
Length(±0.5mm):35
plug(2mm):2