This
listing is for dimmer plates (supplied with matching knobs) and dimmer modules.
If you just buy a plate it will be sent as pictured (there will no modules fitted
to it). Dimmer modules will need to be purchased separately.
Part of the G&H Contour Plate range. The plate has curved edges and
features a 6mm depth from front of plate to back. The plate is made from steel which is then finished in a graphite coating. All G&H plates are
manufactured to the highest standard from solid brass or steel and are covered
by a 1 year guarantee. All dimmer plates come supplied with two screws coloured
to suit the plate and dimmer knobs as pictured.
Plate size: 86mm x 86mm (1 gang & 2 gang)
Plate size: 146mm x 86mm (3 gang & 4 gang)
Please note halogen dimmer modules cannot be used with LED bulbs.
The following dimmer modules can only be used on a 1 gang plate due to
their size:
MKP400
20-400W Vcom (max 40 bulbs) LED
MTP500 60-500W Vdim Halogen
MIP1000 100-1000W Vplus Halogen
MIP700 60-700W Vplus Halogen
MTR1000 200-1000W Rotary Halogen
DIMMER MODULE SPECS:
MJP120 0-120W Vpro (max 10 bulbs) LED:
Product Description: 2-Way
Push-on Push-off LED Replacement Dimmer Module Kit 1 x 0-120W (1-10 LEDs)
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Pro intelligent dimming technology. Soft
start feature and intelligent overload protection. Adjustable minimum
brightness setting and choice of driving modes.
Dimensions: 52x26x42mm
Product Weight (g): 50
V-Pro dimmers are set to run in trailing-edge mode (MODE 1) by default. This
versatile mode is suitable for most types of lighting recommended below. The
alternative trailing-edge mode (MODE 3) may improve the performance of some
dimmable LEDs. Some other lighting loads, including some types of LED, perform
best in Mode 2. This is a simulated leading edge mode (not TRIAC) which is
suitable for use with certain types of LED light.
Operating Voltage: 220/250V AC
Maximum Load Rating: LED; 120W (Max. 10 lamps)
Application Advice: Not suitable for use with non-dimmable fluorescent
bulbs and tubes, wire-wound or toroidal transformers, TRIAC dimmable loads or
electric motors.
Varilight Guarantee (years): 10
MTP250 40-250W Vdim Halogen:
Product Description: 2-Way Push-on Push-off Replacement Dimmer Module Kit
40-250W
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Dim dimming technology. Ideal for
incandescent lighting including mains and low voltage halogen.
Dimensions: 50x25x41mm
MKP180 15-180W Vcom (max 20 bulbs) LED:
Product Description: 2-Way Push-on Push-off LED Replacement Dimmer Module
Kit 1 x 15-180W (Max 20 LEDs)
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Com intelligent TRIAC leading edge dimming
technology. Soft start feature and intelligent overload protection. Suitable
for many dimmable LED lamps.
Dimensions: 53x28x42mm
MKP100 0-100W Vcom (max 10 bulbs) LED:
Product Description: 2-Way Push-On/Off Rotary LED Dimmer 0-100W (max 10
LEDs)
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Com intelligent TRIAC leading edge dimming
technology. Soft start feature and intelligent overload protection. Adjustable
minimum brightness setting and choice of driving modes to optimise the dimming
performance of a given LED lighting load.
Dimensions: 52x26x42mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: LED; 100W (Max. 10 LEDs)
Application Advice: Not suitable for use with non-dimmable fluorescent
bulbs and tubes, wire-wound or toroidal transformers or electric motors
Varilight Guarantee (years): 10
MTP402 60-400W Vdim Rotary Halogen:
Product Description: 2-Way Push-On/Off Rotary Dimmer 1 x 60-400W
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Dim dimming technology. Ideal for
incandescent lighting including mains and low voltage halogen . Overload
protection that automatically switches off the lights when an overload is
detected.
Dimensions: 53x28x43mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: Halogen; 400W
Application Advice: Not suitable for wire-wound low voltage transformers,
fluorescent lighting, motors or fans
Varilight Guarantee (years): 10
MIP400 40-400W Vplus Halogen:
Product Description: 2-Way Push-On/Off Rotary Dimmer 40-400W Replacement
Module Kit
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Plus intelligent dimming technology. Soft
start feature and intelligent overload protection.
Dimensions: 52x26x42mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: Halogen; 400W
Application Advice: Not suitable for motors or fans
Varilight Guarantee (years): 10
MIP302 40-300W Vplus Halogen:
Product Description: 2-Way Push-on Push-off Dimmer 1 x 40-300W
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Plus intelligent dimming technology. Soft
start feature and intelligent overload protection.
Dimensions: 52x26x42mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: Halogen; 300W
Application Advice: Not suitable for motors or fans
Varilight Guarantee (years): 10
MJP300 0-300W Vpro (max 30 bulbs) LED:
Product Description: 2-Way Push-On/Off Rotary LED Dimmer 0-300W (Max 30
LEDs) Replacement Module Kit
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Pro intelligent dimming technology. Soft
start feature and intelligent overload protection. Adjustable minimum
brightness setting and choice of driving modes . Suitable for many dimmable LED
lamps.
Dimensions: 52x26x42mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: LED; 300W (Max. 30 Lamps)
Application Advice: Not suitable for use with non-dimmable fluorescent
bulbs and tubes, wire-wound or toroidal transformers, TRIAC dimmable loads or
electric motors
Varilight Guarantee (years): 10
MTR250 40-250W Vdim Rotary Halogen:
Product Description: 1-Way Rotary Replacement Dimmer Module Kit 40-250W
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Dim dimming technology. Ideal for
incandescent lighting including mains and low voltage halogen. The dimmer is
rotary controlled (not push on/off), meaning to operate you rotate clockwise
and it will click on, then continue to rotate to increase brightness.
Dimensions: 53x25x38mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: Halogen; 250W
Application Advice: Not suitable for wire-wound low voltage transformers,
fluorescent lighting, motors or fans
Varilight Guarantee (years): 10
MTR402 60-400W Rotary Halogen:
Product Description: 1-Way Rotary Replacement Dimmer Module Kit 60-400W
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Dim dimming technology. Ideal for
incandescent lighting including mains and low voltage halogen . The dimmer is
rotary controlled (not push on/off), meaning to operate you rotate clockwise
and it will click on, then continue to rotate to increase brightness.
Dimensions: 52x27x42mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: Halogen; 400W
Application Advice: Not suitable for wire-wound low voltage transformers,
fluorescent lighting, motors or fans
Varilight Guarantee (years): 10
MH0 2 Way Dummy Dimmer:
Product Description: 2-Way Push-On/Off Switch Module (Dummy Dimmer) 6A
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. 1- or 2-way switching. Identical in
appearance to dimmer switch without dimming function. Push-on/off function
only.
Dimensions: 50x26x42mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: 6A
Application Advice: No dimming function
Varilight Guarantee (years): 10
MPINT Intermediate Dummy Dimmer:
Product Description: Intermediate Push-On/Off Switch Module (Dummy Dimmer)
6A
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. Intermediate (3-way) switching. Identical in
appearance to dimmer switch without dimming function. Push-on/off function
only.
Dimensions: 50x23x42mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: 6A
Application Advice: No dimming function
Varilight Guarantee (years): 10
MKP400 20-400W Vcom (max 40 bulbs) LED:
Product Description: 1-Gang 2-Way Push-On/Off Rotary LED Dimmer 1 x
20-400W (Max 40 LEDs) Replacement Module Kit
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Com intelligent TRIAC leading edge dimming
technology. Soft start feature and intelligent overload protection. Suitable
for many dimmable LED lamps.
Dimensions: 50x37x45mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: LED; 400W (Max. 40 LEDs)
Application Advice: Not suitable for use with non-dimmable fluorescent
bulbs and tubes, wire-wound or toroidal transformers or electric motors
Varilight Guarantee (years): 10
MTP500 60-500W Vdim Halogen:
Product Description: 2-Way Push-on Push-off Replacement Dimmer Module Kit
60-500W
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Dim dimming technology. Ideal for
incandescent lighting including mains and low voltage halogen.
Dimensions: 50x36x45mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: Halogen; 500W
Application Advice: Not suitable for wire-wound low voltage transformers,
fluorescent lighting, motors or fans
Varilight Guarantee (years): 10
MIP1000 100-1000W Vplus Halogen:
Product Description: 2-Way Push-on Push-off Replacement Dimmer Module Kit
100-1000W
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Plus intelligent dimming technology. Soft
start feature and intelligent overload protection.
Dimensions: 64x58x46mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: Halogen; 1000W
Application Advice: Not suitable for motors or fans
Varilight Guarantee (years): 10
MIP700 60-700W Vplus Halogen:
Product Description: 2-Way Push-on Push-off Replacement Dimmer Module Kit
60-700W
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Plus intelligent dimming technology. Soft
start feature and intelligent overload protection.
Dimensions: 64x58x46mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: Halogen; 700W
Application Advice: Not suitable for motors or fans
Varilight Guarantee (years): 10
MTR1000 200-1000W Rotary Halogen:
Product Category: V-Dim Module
Product Description: 1-Way Rotary Replacement Dimmer Module Kit 200-1000W
Features: Can be used to replace dimmer modules in existing faceplates or
in the Matrix dimmer grid system. V-Dim dimming technology. Ideal for
incandescent lighting including mains and low voltage halogen . The dimmer is
rotary controlled (not push on/off), meaning to operate you rotate clockwise
and it will click on, then continue to rotate to increase brightness.
Dimensions: 64x58x42mm
Product Weight (g): 50
Operating Voltage: 220/250V AC
Maximum Load Rating: Halogen; 1000W
Application Advice: Not suitable for wire-wound low voltage transformers,
fluorescent lighting, motors or fans
Varilight Guarantee (years): 10