These dry-reed switches have been hermetically sealed in a gas-filled glass envelope.
Actuation is done with an electro-magnet, a permanent magnet or a combination of both.
If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil.
They feature single pole normally open contacts
Hermetically sealed
Form A (SPNO) with rhodium plated contacts
Mechanical Life 108 Operations
In this BIN you will get the following: 1 piece of Glass Reed Switch (Sub Miniature) Part Number Crydom/Cynergy3/ Part No. SRG200-35-40 (SRA200G-35-40) Contact Form A (Normally Open) Contact Material: Rhodium Switching Capacity: 12VA (12 Watt) Switching Voltage: 230V AC/DC max Switching Current: 1.0A max ** (reduced life at max current) better to switch via a Relay Pull in Sensitivity is 35AT Release Sensitivity is 5AT Dimensions: Total Length: 55mm, Glass Length 19mm, Glass Diameter 2.6mm Wire Leg's are 0.55mm diameter With this BIN you will get 1 piece Sub Miniature Reed Switch Part SRG200-35-40 These are rated at 12VA so it is recommended that a Relay coil is switched rather than direct to a source
12VA means Volts used x Current Taken ie Amps so if used on Mains 240Volt = current MAX available is 52mA 24Volt =current MAX available is 0.5Amp etc Cutting (requires special pliers) The cracks can be so small that they are not visible to the eye. PLEASE NOTE! Cutting off the connections reduces the switch's magnetic sensitivity. Lifespan of hundreds of millions of operations |
Postage will be made via second
class post
Low follow-on post charge for
each additional item
First class, Signed For, and
Courier available at extra cost if required
Free collection in person from
Verwood, Dorset – please contact us
Please note that
standard VAT is included in the cost.
Please see my shop for other
items