• Description:
    • Automobile water tank, also known as radiator, is the main component of automobile cooling system; its function is to dissipate heat.
    • The cooling water absorbs heat in the water jacket, flows to the radiator and dissipates the heat, and then returns to the water jacket to circulate continuously. So as to achieve the effect of heat dissipation and temperature adjustment. It is also an important part of a car engine.
     
  • Fitment:
  • For 2016-2018 Chevrolet Sonic 1.4L For 2013-2017 Chevrolet Sonic 1.6L For 2012-2018 Chevrolet Sonic 1.8L
  •  
  • Placement on Vehicle:
  • Front
  •  
  • Leakage treatment:

    • RAD13247 Aluminum Radiator Assembly For 2012-2018 Chevrolet Sonic 1.4L 1.6L 1.8L

    Description:

    • Automobile water tank, also known as radiator, is the main component of automobile cooling system; its function is to dissipate heat.
    • The cooling water absorbs heat in the water jacket, flows to the radiator and dissipates the heat, and then returns to the water jacket to circulate continuously. So as to achieve the effect of heat dissipation and temperature adjustment. It is also an important part of a car engine.

     

    Fitment:

    For 2016-2018 Chevrolet Sonic 1.4L
    For 2013-2017 Chevrolet Sonic 1.6L
    For 2012-2018 Chevrolet Sonic 1.8L

     

    Placement on Vehicle:

    Front

     

    Leakage treatment:

    1. When the leak does not exceed 1mm cracks or 2mm holes, add a bottle of water tank strong plugging agent to the water tank to start the car.
    2. 5~10 minutes after turning on the cooling water to start the large cycle, no matter it is the water tank, the rubber tube and various pads in the cooling system, the leak will stop at the leaking place. After stopping the leak, it does not need to be released, which will not affect the heat dissipation and blockage.
    3. If there is no anti-leak agent to carry, the individual radiator pipes slightly leak water, you can temporarily put the loose tobacco into the water tank, and use the water circulation pressure to block the tobacco in the leaking part of the radiator pipe for temporary use.
    4. If the water tank radiator pipe leaks more seriously, you can cut the leaking radiator pipe from the leaking place, block the cut radiator pipe with a cotton ball coated with soap, and then use pliers to flatten the head of the cut radiator pipe and then crimp it. Press tightly to stop water leakage.
    5. If the rubber pipe joint is leaking, you can use a screwdriver to wrap the rubber pipe joint clamp twice on the rubber pipe joint in time, and then tighten it with pliers. If the rubber tube is damaged, tape the broken place tightly and use it temporarily.

    ?

    Steps to Replace the Car Radiator:

    Step 1 

    Remove the wire harness clip inside the beam on the upper part of the water tank, and remove the wire harness

    Step 2 

    Disassemble the air filter assembly and remove the control computer

    Step 3 

    Remove the headlight on the right

    Step 4 

    Remove the fan frame assembly

    Step 5 

    Unscrew the drain bolt at the bottom of the water tank and collect the coolant

    Step 6 

    Disassemble the upper and lower water pipes

    Step 7 

    Remove the fixing bolts of the water tank

    Step 8 

    Take out the water tank at a certain angle and reinstall it in the reverse step.

     

    Maintenance Method:
    1. Stop the vehicle and turn off the engine. After the coolant temperature drops, open the expansion kettle and fill the water tank with cleaning agent;
    2. Start the engine and run it at idle speed for 510 minutes after the cooling fan works;
    3. Turn off the flame and remove the front bumper of the vehicle. When disassembling, make sure that all the fixing screws have been unscrewed, and at the same time, slowly disassemble from both ends to the middle, and don't break the fixing buckle;
    4. Make sure that the temperature of the coolant is completely cooled, and drain the water tank cleaning agent along with the coolant, and finally replace the engine coolant with a new one.


    Item Specifics
    Brand auspartshouse
    Manufacturer Part Number 9863882
    Material Aluminum
    Row Count 1 Row
    Fitment Type Direct Replacement
    Color Silver
    Style Crossflow
    Manufacturer Warranty 1 Year
    Type Radiator
    Inlet Diameter 1 1/3in.
    Housing Color Black
    Interchange Part Number RAD13247,Engine Rad,Replacement Radiator,0.63in.in.Core Thickness
    Other Part Number CU13247,engine radiator,new,cooling radiator,air radiator
    Custom Bundle No
    Modified Item No
    Feature High Quality
    Core Length 21.66in.
    Core Height 14.89in.
    Core Thickness 0.63in.
    Outlet Diameter 1 1/3in.
    Package Included 1 x Brand New Radiator Assembly
    Core Material Aluminum
    Tank Material Plastic
    Quantity Sold Sold Individually

    Payment
    We use eBay's Safe and Secure Checkout. Just click the Pay Now button at the top of any of the auctions you have won.
     
    To pay for multiple auctions, successfully win all auctions you wish to purchase and then click the Pay Now button on any of the listings you won. You will only have to checkout and pay once for your entire order.
     
    Please review our detailed policies on shipping and fixing any issues before purchasing the item. If you have any questions, please email us through "Ask a question".
     
    Payment Options: Paypal, G Pay, Visa, Mastercard, American Express, and Discover.
     
    Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages within 12 hours.
     
    Payment must be received within 10 days as auction ended or order might be delayed.
    Shipping

    1. More than 90% orders processed within 24 hours of payment verification.

    2. We only ship to the address in order provided to us. Your PAYPAL address will not be recognized as shipping address.

    3. The images shown is the the actual item you will get and the size are for your reference.

    4. If you have not received your shipment within 15 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    Returns

    1. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    2. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    3. Return shipping is to be paid by the Buyer if the problem turned to be buyer's end, or return will be seller's responsibility.

    Feedback

    We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Contact Us

    Any question or problem, please feel free to contact us via ebay message.

    Just Get It NOW
    content_src_url
    Shop Category
     Store Home
     Wheel Spacers
     Leveling Lift Kits
     3RD Brake Lights
     LED Instrument Lights
     Tire Pressure Sensors
     Fasteners
     Remote Keys
     Sun Visors
     Roof Racks
     Ballast Modules
     Rubber Seal Strips
     Throttle Body
     Thermostat Housing
     Fuel Injectors
     Coilovers
     Ignition Coils
     LED Whip Lights
     Wheel Hub Bearing
     Suspension Kits
     Window Regulators
     Sensors
     Mud Flaps
     Solenoids
     Lift Supports
     Resistors
     HVAC Blower Motors
     Radiators
     Cooling Fans
     Coolant Overflow Tanks
     Engine Gaskets
     Blend Door Actuators
     Tonneau Covers
     Air Suspensions
     AC Condensers
     Heater Cores
     Window Switches
     Door Handles
     Shock Struts
     Windshield Wiper Motors
     A/C Compressors
     Timing Chain Kits
     Timing Belt Kits
     Turbochargers
     Radiator Supports
     Mirrors
     A/C Evaporators
     Engine Motor Mounts
     Starters
     Alternators
     Brake Calipers
     Power Steering Pumps
     Tensioners
     Brake Rotors
     Brake Pads
     Fuel Pumps
     Water Pumps
     Driveshafts
     Idle Air Control Valves
     Power Steering Rack & Pinion
     VVT Variable Valves
     Lug Nuts
     Steering Shafts
     CV Axles
     Oil Pans
     Hydraulic Lifters
     Towing Parts
     Steering U-Joint Parts
     Door Lock Actuator
     Spoilers & Wings
     Truck Bed Accessories
     Lawn Mower Parts
     Other
    Hot Item
    New List Item
    RAD13247 Aluminum Radiator Assembly For 2012-2018 Chevrolet Sonic 1.4L 1.6L 1.8L

    Description:

    • Automobile water tank, also known as radiator, is the main component of automobile cooling system; its function is to dissipate heat.
    • The cooling water absorbs heat in the water jacket, flows to the radiator and dissipates the heat, and then returns to the water jacket to circulate continuously. So as to achieve the effect of heat dissipation and temperature adjustment. It is also an important part of a car engine.

     

    Fitment:

    For 2016-2018 Chevrolet Sonic 1.4L
    For 2013-2017 Chevrolet Sonic 1.6L
    For 2012-2018 Chevrolet Sonic 1.8L

     

    Placement on Vehicle:

    Front

     

    Leakage treatment:

    1. When the leak does not exceed 1mm cracks or 2mm holes, add a bottle of water tank strong plugging agent to the water tank to start the car.
    2. 5~10 minutes after turning on the cooling water to start the large cycle, no matter it is the water tank, the rubber tube and various pads in the cooling system, the leak will stop at the leaking place. After stopping the leak, it does not need to be released, which will not affect the heat dissipation and blockage.
    3. If there is no anti-leak agent to carry, the individual radiator pipes slightly leak water, you can temporarily put the loose tobacco into the water tank, and use the water circulation pressure to block the tobacco in the leaking part of the radiator pipe for temporary use.
    4. If the water tank radiator pipe leaks more seriously, you can cut the leaking radiator pipe from the leaking place, block the cut radiator pipe with a cotton ball coated with soap, and then use pliers to flatten the head of the cut radiator pipe and then crimp it. Press tightly to stop water leakage.
    5. If the rubber pipe joint is leaking, you can use a screwdriver to wrap the rubber pipe joint clamp twice on the rubber pipe joint in time, and then tighten it with pliers. If the rubber tube is damaged, tape the broken place tightly and use it temporarily.

    ?

    Steps to Replace the Car Radiator:

    Step 1 

    Remove the wire harness clip inside the beam on the upper part of the water tank, and remove the wire harness

    Step 2 

    Disassemble the air filter assembly and remove the control computer

    Step 3 

    Remove the headlight on the right

    Step 4 

    Remove the fan frame assembly

    Step 5 

    Unscrew the drain bolt at the bottom of the water tank and collect the coolant

    Step 6 

    Disassemble the upper and lower water pipes

    Step 7 

    Remove the fixing bolts of the water tank

    Step 8 

    Take out the water tank at a certain angle and reinstall it in the reverse step.

     

    Maintenance Method:
    1. Stop the vehicle and turn off the engine. After the coolant temperature drops, open the expansion kettle and fill the water tank with cleaning agent;
    2. Start the engine and run it at idle speed for 510 minutes after the cooling fan works;
    3. Turn off the flame and remove the front bumper of the vehicle. When disassembling, make sure that all the fixing screws have been unscrewed, and at the same time, slowly disassemble from both ends to the middle, and don't break the fixing buckle;
    4. Make sure that the temperature of the coolant is completely cooled, and drain the water tank cleaning agent along with the coolant, and finally replace the engine coolant with a new one.

    Item Specifics
    Brand :auspartshouse
    Manufacturer Part Number :9863882
    Material :Aluminum
    Row Count :1 Row
    Fitment Type :Direct Replacement
    Color :Silver
    Style :Crossflow
    Manufacturer Warranty :1 Year
    Type :Radiator
    Inlet Diameter :1 1/3in.
    Housing Color :Black
    Interchange Part Number :RAD13247,Engine Rad,Replacement Radiator,0.63in.in.Core Thickness
    Other Part Number :CU13247,engine radiator,new,cooling radiator,air radiator
    Custom Bundle :No
    Modified Item :No
    Feature :High Quality
    Core Length :21.66in.
    Core Height :14.89in.
    Core Thickness :0.63in.
    Outlet Diameter :1 1/3in.
    Package Included :1 x Brand New Radiator Assembly
    Core Material :Aluminum
    Tank Material :Plastic
    Quantity Sold :Sold Individually


    We use eBay's Safe and Secure Checkout. Just click the Pay Now button at the top of any of the auctions you have won.
     
    To pay for multiple auctions, successfully win all auctions you wish to purchase and then click the Pay Now button on any of the listings you won. You will only have to checkout and pay once for your entire order.
     
    Please review our detailed policies on shipping and fixing any issues before purchasing the item. If you have any questions, please email us through "Ask a question".
     
    Payment Options: Paypal, G Pay, Visa, Mastercard, American Express, and Discover.
     
    Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages within 12 hours.
     
    Payment must be received within 10 days as auction ended or order might be delayed.

    1. More than 90% orders processed within 24 hours of payment verification.

    2. We only ship to the address in order provided to us. Your PAYPAL address will not be recognized as shipping address.

    3. The images shown is the the actual item you will get and the size are for your reference.

    4. If you have not received your shipment within 15 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    1. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    2. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    3. Return shipping is to be paid by the Buyer if the problem turned to be buyer's end, or return will be seller's responsibility.

    We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Any question or problem, please feel free to contact us via ebay message.


    All rights reserved.