This is an IBC adapter with an S60X6 coarse buttress thread suitable for the majority of European IBC's (60 mm across the threads and 6 mm between them).

At the other end is a female BSP ROTATING female thread which allows the attachment of any fitting (hose tails, Snap on hose connections, valves etc).  Once fitted, these will rotate which is particularly useful to stop snagging when pulling away from the tank.

Available with 4 sizes of thread.....

3/4" BSP

1" BSP

1.1/4" BSP

2" BSP

PLEASE NOTE: BSP threads are not the same as a ruler measurements, they vary by about 1/4".  If in doubt please ask.

WILL IT FIT MY TANK?

These adapters will fit most standard UK and European IBC containers where the buttress thread is a coarse S60X6 thread. An S60X6 Buttress thread measures 60 mm across from thread edge to thread edge and has a 6 mm pitch (distance between the threads).

If your tank buttress is not an S60X6 (about 20% are not) you can purchase a Buttress Thread Converter which will convert the thread to the S60X6 you will require.  If you know the measurements of your buttress thread take a look at the “Buttress Thread Converters” Category which you can access from the home page.  If you are not sure send us a message and we will try to point you in the right direction.

SEAL OPTIONS  

You have the OPTION of either the Standard Seals, The standard seals are made from Nitrile Rubber and are suitable for fuel oils and most non caustic (or mildly caustic) liquids. The VITON Seal offer superior chemical resistance and will for instance tolerate Hydrochloric acid up to 40%.  If you are not sure which seals you need, send us a message and we will try to advise you.