Characteristic:
100% brand new
Used as a normal buck module with overcurrent protection function.
Use as a charger for various lithium batteries, batteries, nickel-cadmium-nickel-hydrogen batteries (battery packs), solar panels, wind turbines, etc.
You can easily charge your digital products via the integrated USB interface. (Note: The USB output voltage is the same as the module output voltage, not a fixed 5V output. Please confirm this before charging the USB device.)
With constant voltage and constant current, two modes, displays show which mode the module is currently in.
Used as a high performance LED constant current drive module.
When used as a lithium battery charger, you can set the float voltage and the charging current. There are indicators that show whether the battery is charging or is already full.
With current limiting protection.
Short-circuit protection, overtemperature protection, automatically switches off the output after overtemperature.
Specification:
Input voltage: 5-36V (Note! The input voltage is greater than 6.5V, the digital display is normal. If you have 5V input, please use the voltmeter to measure the output and adjust the output voltage. )
Output voltage: 1.25-32 V continuously adjustable
Output current: adjustable, up to 5 A (recommended for use within 4.5 A)
Output power: up to 75W (recommended for 50W, please reduce the power when using a large differential pressure)
Working temperature: -40 ~ + 85 degrees
Working frequency: 180KHz
Conversion efficiency: up to 96%
Reverse polarity protection of the input: none. (If necessary, put a large current diode in the input string.)
Wiring method: Terminal block or solder connection, V-IN is input, V-OUT is output
Delivery content:
1 x module
6 pieces x housing
8 x copper pillars
8 x screws