Hollyland Mars 400S PRO HDMI SDI 400ft Wifi Video Transmitter + Receiver Set

Hollyland Mars 400S PRO Wireless Video Transmission System

1. Long Range : 400ft Transmission Range between TX and RX(LOS); 300ft Transmission Range between TX and APP(LOS);
2. Lowest Latency : 0.08S Lowest Transmission Latency;
3. Up to 4 APP Monitoring : 1 Transmitter supports 2 Receivers (0 Receiver - 4 APP ; 1 Receiver - 2 APP ; 2 Receiver - 0 APP);
4. Power Supply: Supports 6-16V DC Power Supply, 5-12V USB Type-C Power Supply, and Battery Power Supply;
5. Quick to install: Integrated Cold Shoe with 1/4 screw hole for Quick Installation;
6. Two Interface Options: Both HDMI & SDI Connection Options at TX & RX;
7. High-Definition: Data Rate Raised from 8M Bps to 12M Bps for High-Definition Monitoring Quality;
8. Channel Selection: Supports Smart Channel Selection;
9. APP Upgrade: Supports APP Firmware Upgrade;
10. Live Streaming Function: Direct Data Stream from RX for Live Streaming;


Newest Industrial Design & Low-Power Mode

Hollyland Mars 400S PRO adopts transverse sleek industrial design with integrated cold shoe on both the transmitter and the receiver, which means the system has lower gravity center with more stable and convenient installation. If the system without any operation for 5s, the OLED screen will automatically enters the low-power mode and reduces the brightness to save battery power.


0.08S Latency, 400ft Range

Hollyland Mars 400S PRO has 400ft line of sight (LOS) wireless video & audio transmission range between TX and RX with 0.08S average latency, [0.06S lowest latency]; 300ft line of sight (LOS) wireless video & audio transmission range between TX and APP. 1 Mars 400S PRO transmitter supports 2 receivers. For the number of RX and App, it follows this pattern: 2 RXs - 0 App, 1 RX - 2 Apps, 0 RX - 4 App.


Direct Monitoring Video Feed for Live Streaming

Hollyland Mars 400S PRO supports RTSP live streaming, video feed straight out of RX will be used for live streaming through OBS/Vmix/VLC on our personal computer without further encryption and decryption via a video capture device. only needs a standard RJ45 cable and Type-C to RJ45 connector, no more equipment is needed.


3 Scene Modes, 3 Fan Modes & 3 Power Options

Hollyland Mars 400S PRO has High-definition mode, balance mode and speed mode in the settings. The data rate raised from 8Mbps to 12Mbps for high -definition monitoring quality. Optional Fan Modes-off, low speed & auto fan modes for different applications and better shooting experience. Supports 6-16DC power supply, 5-12V USB Type-C power supply and L-series batteries power supply.


Channel Scan & App Upgrade & High-Definition

MARS 400S PRO supports channel scan and firmware update on APP. Channel scan can be used on either the receiver and the HollyView App, while easy & quick firmware update is enabled on the App. The data rate is raised from 8M Bps to 12M Bps for HD monitoring quality.


Up to 4 APP Monitoring

Hollyland MARS 400S PRO transmitter supports 2 receivers. For the number of RX and App, it follows this pattern: 2 RX - 0 Apps, 1 RX - 2 Apps, 0 RX - 4 Apps. The lightweight and compact design can also meet different applications, such as wedding ceremonies/advertising /short videos /live broadcast and so on.


SDI & HDMI & OLED Screen

MARS 400S PRO supports both SDI and HDMI, including SDI IN on the transmitter and HDMI OUT on the receiver, and vice versa. MARS 400S PRO also comes with an OLED display screen which shows device's number, WiFi signal strength, scene mode, USB indicator, device ID, channel display, video format, fan and battery status.


Application

·Live Broadcast
·Sports Activities
·Educational Recording
·Wedding Ceremonies
·Corporate Events

Packing List

1.Transmitter X1
2.Receiver X1
3.Antenna X5
4.DC Adapter X1
5.User Guide X1

Q: Can I use the new mars 400s pro with my mars 400s’tx or rx?

A: The configuration of Mars 400S and 400S Pro are different, so these two systems are not compatible.

Q: How can I switch the wireless frequency, in other words, to switch to another channel?

A: Just click the Up/Down button on Mars 400S Pro transmitter, then the system’s frequency will be automatically changed

Q: How can I find the WiFi password?

A: Long-press the middle button on your TX or RX, and select the WiFi Password option to check the current password

Q: Does the hollyview app support live stream to facebook and youtube?

A: No, it does not support the live stream feature yet :）

Q: Why can't i get the video format displayed on the oled screen?

A: • Check if your HDMI/SDI output video format is higher than 1080. MARS 400S PRO only supports up to 1080
     • Switch the HDMI/SDI cable

1. We Accept PayPal.

2.Accept Credit Card Payment Through PayPal. (Verified Only with Confirm Address )

We will ship the item within 10 business days after clearance of payment.

Shipment is directly from China via Speedpak shipping. it usually takes 7-21 business days. Due to
 
variation of postal service in different areas, some areas may take a little longer.
 
 
1.Please confirm receipt of goods arrive in time.
 
2.Please contact customer service in 30 Days after received item If you have need return or rechange goods or other problem.
 
3.Please send the message before return the package
 
4.Return items MUST have all ORIGINAL packaging and accessories.
 
Thanks for your cooperation.

 Feel free to place orders , no worry for customer service , we are always here for you

 1. This item is 100% Brand New. Never used. It comes with 2 Months Warranty by Seller.

2. Our warranty does not extend to the products did are physically damaged or did are not under normal operating conditions as a result of misuse or improper installation.

3. If you are not satisfied with, you can send it back to us for refund or exchange.

4. Please contact us to solve any problem with the item before your case opening. We will do our best for you.

5. Returns must be in its original condition and package When the item is returned.

PushAuction