Battery Control Module
Description:
Mini solar jar light circuit control board. Suitable for solar lawn lights, solar ceramic lights, solar landscape lights, and other solar products for circuit control.
It can be connected with 1.2V Ni-MH battery and 2V solar panel.
This is a can be assembled into a mason lamp jar/lawn lamp/wall
Lamp/post lamp/string lamp/Christmas lamp/sunlight lamp/fluorescent lamp/
Advertising lights/night lights, etc. various shapes of solar landscape
Light control circuit board, various lamps assembled with this circuit board
Has been exported to all parts of the world.
This circuit board has a small area requirement for solar panels,
LED drive efficiency is high, and the lighting time is long. line
There is a toggle switch on the board, you can choose to emit white light or seven
Color, white light with high brightness, colorful lights with rich colors, Look beautiful!
It can be connected with 1.2V Ni-MH battery and 2V solar panel.
This is a can be assembled into a mason lamp jar/lawn lamp/wall
Lamp/post lamp/string lamp/Christmas lamp/sunlight lamp/fluorescent lamp/
Advertising lights/night lights, etc. various shapes of solar landscape
Light control circuit board, various lamps assembled with this circuit board
Has been exported to all parts of the world.
This circuit board has a small area requirement for solar panels,
LED drive efficiency is high, and the lighting time is long. line
There is a toggle switch on the board, you can choose to emit white light or seven
Color, white light with high brightness, colorful lights with rich colors, Look beautiful!
Technical Parameters:
Solar panel: 2V /≤150mA
Battery specification: 1.2V rechargeable battery
Battery capacity: ≥600mAH
LED current: about 10mA
Circuit board size: 25mm long and 15mm wide
Wiring instructions:
S+ connected to solar anode
S- connect solar negative
B+ connects battery positive
B- connect battery negative
Solar ceramic light jar light lawn light circuit control board
Comes with two LED lamp beads
(1 high-brightness white light + 1 colorful changing color light)
Battery specification: 1.2V rechargeable battery
Battery capacity: ≥600mAH
LED current: about 10mA
Circuit board size: 25mm long and 15mm wide
Wiring instructions:
S+ connected to solar anode
S- connect solar negative
B+ connects battery positive
B- connect battery negative
Solar ceramic light jar light lawn light circuit control board
Comes with two LED lamp beads
(1 high-brightness white light + 1 colorful changing color light)
Built-in three-level switch (white light file + color light file + off file)
Suitable for connecting 1.2V Ni-MH battery and 2V solar panel
Suitable for connecting 1.2V Ni-MH battery and 2V solar panel
Package Include:
1x 1.2V Ni-MH Battery Controller Solar Jar Light Control Board Solar Ceramic Light
------------------------------------------------------------------
------------------------------------------------------------------
Light Control Module
Reference description:
1. Features:
1. Drive 1 to multiple LED lamp beads or parallel light strings;
Suitable for 1.2V single Ni-MH battery power supply;
2. Can drive red, yellow, blue, white and green LED lamp beads;
3.White lamp beads are used by default, and other color lamp beads can be used after modifying the parameters in batch;
4. The circuit board uses an I-shaped inductor, with high conversion efficiency, long lighting time, and high brightness of the lamp beads;
5. With light control function, charge during the day and automatically turn on the light at night;
6. The battery discharge current is about 30ma by default, and the current can be changed in batches;
Circuit board size: length 20mm * width 10mm.
1. Drive 1 to multiple LED lamp beads or parallel light strings;
Suitable for 1.2V single Ni-MH battery power supply;
2. Can drive red, yellow, blue, white and green LED lamp beads;
3.White lamp beads are used by default, and other color lamp beads can be used after modifying the parameters in batch;
4. The circuit board uses an I-shaped inductor, with high conversion efficiency, long lighting time, and high brightness of the lamp beads;
5. With light control function, charge during the day and automatically turn on the light at night;
6. The battery discharge current is about 30ma by default, and the current can be changed in batches;
Circuit board size: length 20mm * width 10mm.
2. Applicable occasions:
1. Solar single and double-sided road studs, solar ship warning lights, solar contour lights, solar navigation lights;
2. Home solar landscape light, solar mason light jar, solar lawn light, solar Christmas light, solar gypsophila
Charging of solar light strings and light-sensitive switch light control.
1. Solar single and double-sided road studs, solar ship warning lights, solar contour lights, solar navigation lights;
2. Home solar landscape light, solar mason light jar, solar lawn light, solar Christmas light, solar gypsophila
Charging of solar light strings and light-sensitive switch light control.
3. Eelectrical parameters:
Solar panel voltage is about 2V
Solar panel current ≤120mA
Battery specification: single-cell Ni-MH No. 5 or No. 7 rechargeable batteryBattery capacity: about 60OmAH is recommended
Battery discharge current: about 30mA (can also be customized)
Flashing frequency: no flashing
Solar panel current ≤120mA
Battery specification: single-cell Ni-MH No. 5 or No. 7 rechargeable batteryBattery capacity: about 60OmAH is recommended
Battery discharge current: about 30mA (can also be customized)
Flashing frequency: no flashing
4. Wiring diagram:
5. Lamp beads requirements:
The circuit board uses white lamp beads or lamp strings by default. When using the lamp string, the built-in lamp beads of the lamp string are connected in parallel. If you use other colors of lamp beads,
It is possible that the battery discharge current increases. The lamp bead is directly connected to the circuit board without current limiting resistor. In the case of batches, you can customize the circuit board to use other colors of lamp beads, or adjust the parameters yourself. For specific adjustment methods, please see Chapter 6.
This circuit board is not suitable for connecting LED lamp beads with built-in chips, so avoid!!
The circuit board uses white lamp beads or lamp strings by default. When using the lamp string, the built-in lamp beads of the lamp string are connected in parallel. If you use other colors of lamp beads,
It is possible that the battery discharge current increases. The lamp bead is directly connected to the circuit board without current limiting resistor. In the case of batches, you can customize the circuit board to use other colors of lamp beads, or adjust the parameters yourself. For specific adjustment methods, please see Chapter 6.
This circuit board is not suitable for connecting LED lamp beads with built-in chips, so avoid!!
6. Battery discharge current adjustment:
When the battery voltage and the color of the lamp bead have been determined, the discharge current of the battery is determined by the inductance.
The default inductance is 100uH. When the battery voltage is 1.2V and the white light is used,
The discharge current of the battery end is about 30m4. When using other colors of lamp beads, you can change the inductance to obtain the discharge current you need, and increase the inductance to reduce the discharge current.
Reduce the inductance and increase the discharge current. The discharge current of the battery terminal needs to be controlled between 10 and 135mA. Exceeding this current range will damage the circuit board.
When the battery voltage and the color of the lamp bead have been determined, the discharge current of the battery is determined by the inductance.
The default inductance is 100uH. When the battery voltage is 1.2V and the white light is used,
The discharge current of the battery end is about 30m4. When using other colors of lamp beads, you can change the inductance to obtain the discharge current you need, and increase the inductance to reduce the discharge current.
Reduce the inductance and increase the discharge current. The discharge current of the battery terminal needs to be controlled between 10 and 135mA. Exceeding this current range will damage the circuit board.
7. Welding requirements:
1. The circuit board uses a large-scale integrated circuit chip, which is sensitive to static electricity, and anti-static measures must be taken when soldering.
Otherwise it will damage the circuit board;
2. When assembling the lamps, the lamp beads should be welded first, and then the solar panels and batteries should be welded strictly in accordance with this process.
Otherwise it will cause damage to the circuit board.
1. The circuit board uses a large-scale integrated circuit chip, which is sensitive to static electricity, and anti-static measures must be taken when soldering.
Otherwise it will damage the circuit board;
2. When assembling the lamps, the lamp beads should be welded first, and then the solar panels and batteries should be welded strictly in accordance with this process.
Otherwise it will cause damage to the circuit board.
8. Light control function:
The circuit board automatically controls the light on and off by detecting the voltage level of the solar panel, without manual intervention in the whole process.
To achieve the purpose of charging during the day and automatically turning on the lights at night.
The circuit board automatically controls the light on and off by detecting the voltage level of the solar panel, without manual intervention in the whole process.
To achieve the purpose of charging during the day and automatically turning on the lights at night.
9. Package Include:
1x 1.2V Light Control Constant Bright Dual Side Solar Road Stud Light Circuit Board