|
|
||||||
|
|
|
|
|||
|
|
|
|
Note:13S/14S battery box and BMS cannot be mixed used!
Features:
The installation is simple, only the battery is required, no welding is required.
Excellent structure, helps to dissipate heat during battery use
Comes with insurance design, safe to use
The protection board is powerful, reducing worries, flushing the same mouth
Can be stacked in multiple layers
M4 copper pillar conductive
Simple and fast assembly, no welding required
13S1P、13S20A、13S45A Can be made into a battery pack together, please do not buy other models.
14S1P、14S20A、14S30A、Can be made into a battery pack together, please do not buy other models
Size:
13S:19.7*8.8*4.5cm 180g
13S 20A:19.7*8.8*2cm 98g
13S 45A:19.7*8.8*2cm 150g
14S:14S:19.7*8.8*4.5cm 191g
14S 20A:19.7*8.8*2cm 98g
14S 45A:19.7*8.8*2cm 150g
Capacity:
Take the 5000mah 21700 battery as an example, 1P=5AH, 2P=10AH, 3P=15AH, 4P:20AH
Voltage :
1s full 4.2v, after discharge 2.9v.
3s full 12.6v, after discharge 8.7v.
4s full 16.8v, after discharge 11.6v.
5s fully charged with 21v, discharged 14.5v.
6s fully charged 25.2v, discharged 17.4v.
7s fully charged 29.4v, discharged 20.3v.
13s fully charged 54.6v, discharged 37.7v.
14s fully charged 58.8v, discharged 40.6v.
Current: The average instantaneous maximum of each layer is 20a, and it is recommended to be less than 10a for a long time (the actual current is determined by the battery performance)
Electrical parameters and precautions:
It is best to choose the protection board when placing the order to avoid overcharge, over discharge and voltage imbalance during use. It is best to choose our dedicated charger. If other chargers are used, you need to choose a DC connector. , It is recommended that each layer does not exceed 1a charging current
You can install the battery directly after receiving it. The direction and polarity of the battery installation are subject to the symbols on the circuit board
After installing the battery, the direction of the notch is the same, and then screw on the copper pillar,
After the copper pillar is installed, confirm that there is no problem, you can install the cable, and you can use it after the cable is connected
Package includes
1*1 set battery box
Item Specifics | |
---|---|
Brand | Unbranded |
Type | Battery Box |
a) Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
b) Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
Spi7-2596
BEST BUSSINESS PARTNER
13S 14S 48V 21700 Battery Case 20A 45A BMS Pack Battery Power Supply Wall Box
Note:13S/14S battery box and BMS cannot be mixed used!
Features:
The installation is simple, only the battery is required, no welding is required. Excellent structure, helps to dissipate heat during battery use Comes with insurance design, safe to use The protection board is powerful, reducing worries, flushing the same mouth Can be stacked in multiple layers M4 copper pillar conductive Simple and fast assembly, no welding required
13S1P、13S20A、13S45A Can be made into a battery pack together, please do not buy other models.
14S1P、14S20A、14S30A、Can be made into a battery pack together, please do not buy other models
Size: 13S:19.7*8.8*4.5cm 180g 13S 20A:19.7*8.8*2cm 98g
13S 45A:19.7*8.8*2cm 150g
14S:14S:19.7*8.8*4.5cm 191g
14S 20A:19.7*8.8*2cm 98g
14S 45A:19.7*8.8*2cm 150g
Capacity: Take the 5000mah 21700 battery as an example, 1P=5AH, 2P=10AH, 3P=15AH, 4P:20AH
Voltage : 1s full 4.2v, after discharge 2.9v. 3s full 12.6v, after discharge 8.7v. 4s full 16.8v, after discharge 11.6v. 5s fully charged with 21v, discharged 14.5v. 6s fully charged 25.2v, discharged 17.4v. 7s fully charged 29.4v, discharged 20.3v. 13s fully charged 54.6v, discharged 37.7v. 14s fully charged 58.8v, discharged 40.6v.
Current: The average instantaneous maximum of each layer is 20a, and it is recommended to be less than 10a for a long time (the actual current is determined by the battery performance) Electrical parameters and precautions: It is best to choose the protection board when placing the order to avoid overcharge, over discharge and voltage imbalance during use. It is best to choose our dedicated charger. If other chargers are used, you need to choose a DC connector. , It is recommended that each layer does not exceed 1a charging current
You can install the battery directly after receiving it. The direction and polarity of the battery installation are subject to the symbols on the circuit board After installing the battery, the direction of the notch is the same, and then screw on the copper pillar, After the copper pillar is installed, confirm that there is no problem, you can install the cable, and you can use it after the cable is connected
Package includes 1*1 set battery box Payment
a) Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. b) Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
Shipping
Returns
Contact Us
Feedback
100% Customer satisfaction is our top priority.
All rights reserved. |
Shop Category Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |