Features:
  • MagCAD Hammerhead Karoo 2 and Karoo 3 insert for Garmin OEM out front mounts.
  • Replaces the Garmin insert on OEM Garmin mounts, allowing you to then mount a Hammerhead Karoo 2 or Karoo 3 computer.
  • Weighs just 12 grams without hardware.
The Hammerhead device and Garmin mounts pictured are for reference only and not supplied.

What's Included
  • 1x 3D printed mount.
  • 2x M3x16mm cap screws.
  • 2x M3 Nyloc nuts.
Overview
This MagCAD insert replaces the standard insert in your Garmin OEM out front mount, allowing you to then mount a Hammerhead Karoo 2 or Karoo 3 cycle computer. The MagCAD insert is pictured installed in the standard Garmin Mount (high position) and the Extended Flush Out-Front Garmin Mount, both of which are suitable to the mount your Hammerhead Karoo securely to your handlebars.

The design also suits a number of other insert type mounts with 20mm bolt centres and M3 securing screws, such as the Canyon H36 mounts, allowing you to mount your Hammerhead when ordinarily there isn't a compatible mount available.

Exact clearance for your Karoo 2 or Karoo 3 device will depend on the Gamin mount, not supplied, that you pair this mount with. You should check first to ensure you have adequate clearance to twist and remove your Hammerhead device. If in doubt feel free to get in contact with us.

​Application
Fitting the MagCAD insert is a simple process. Simply remove the insert from your Garmin OEM mount with a 2.5mm Allen key and install the MagCAD insert with the supplied M3 cap screws and Nyloc nuts.

To attach your Hammerhead device simply follow the same procedure as with the OEM Hammerhead mount, pulling the device backward onto the mount with a slight twist to centre and locate it. You should here a positive click when the device is attached. We recommend using the tether that's supplied with your Hammerhead device just for extra security.

Compatible With:
  • Hammerhead Karoo 2 & Karoo 3.
  • Garmin OEM out front mounts.
Material
MagCAD Mounts are 3D printed in Nylon PA12. However these are not your typical home 3D printers. Following a process of SLS (Selective Laser Sintering) on industrial size printers, costing anything above £100k, the resulting mounts have fantastic resolution and refinement. The surface finish is slightly rough with a matte effect and the performance of the mounts are comparable to injection moulded parts.

Customisation
As with all MagCAD items it's more than possible to tweak or change the design to suit your particular installation. Feel free to get in contact for more details.

About Me
I’m a MEng Aerospace Engineer and former professional cyclist. All the items, including this mount, are ones which I’ve developed and use myself. A hobby which I take too far but want to share with others.

Delivery
All items in stock and dispatched promptly, usually the same day.

Returns
Should you have any issue or just change your mind we're happy to accept returns within 30 days, providing the item is unused.