• DURABLE STRUCTURE: 10” Transparent Standard Housings are proper for heavy sediment applications. The housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The cap has 3/4" inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. 10” Standard 5 Micron Sediment & Carbone Filters are Used for effectively removing most sediments and chlorines from water

• POINT OF USE: This System for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, well water filtration, food service, and irrigation. Extends life of Washing Machines, Water Heaters & Other Household Appliances. Keeps water fresh by reducing sediment, scale, rust, dirt, sands, silt and removing iron, manganese, chlorine, hydrogen sulfide, herbicides and other industrial chemicals

• EASY TO OPERATE: There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. Unique cap design allow quickly and easy to remove housing to replace cartridges. Transparent housings body allow visually to determine when cartridges should be changed

• 5 MICRON SEDIMENT CARTRIDGE is wrapped and sealed and meets NSF Standards and Regulations. Dimensions: 10” x 2.5”. WELL-MATCHED: PFC5002,DuPont WFPFC5002, 3M CFS110, AP110-NP, AP101S, AP101T, Aqua Pure AP110, AP11T, AP51T, Hydronix SGC-25-1005, Culligan P5, P5-D, P5A, OmniFilter RS14, RS14-SD, RS14-DS and RS14-SS, GE FXUSC, Aquaboon 25S-5M, Manitowoc K-00173, Whirlpool WHKF-GD05, American Plumber W5P, Pureplus PP10-05

• 5 MICRON BLOCK CARBON CARTRIDGE is wrapped and sealed and meets NSF Standards and Regulations. Dimensions: 9.875” x 2.5”. WELL-MATCHED: Watts Premier MAXETW-975, DuPont WFPFC8002, SCWH-5, Whirlpool WHA2BF5, Water Filter Tree WWC105, GE FXWTC, WFD WF-CB105, Culligan D-10A & D-10, EcoPure EPW2C, Aquaboon CTO, Purenex C-5M, Neo-Pure CTO1-2510, COR10B5, KleenWater KWGE25RG, WFDWC30001, Omnipure OMB934-5M, WFPFC9001, Everpure CG5-10, MatriKX E32-250-125-975, DEV9108-15, iSpring FC15

• Dual Whole House Water Filter System, Transparent Standard Housings, Presser Relief Valve, 3/4” Inlet/Outlet Brass Port(RA-125-10D) is proper to use for removing chlorine, odor and bad taste, and reducing dirt, rust, & suspended particles in incoming water to you house.
• The transparent housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness.
• The blue cap has 3/4" inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes.
• There is rubber O-ring on the top of the housing body to ensure a watertight seal.
• Two pressure relief valves on the inlet and outlet side of the cap releases pressure in the housing for changing filter cartridges.
• Those Housings for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, food service, and irrigation.
• Easy to connect multiply housings in one Custom Whole House Water Filtration System to fit your specific needs.

Product Features:

• Wall bracket
• Compact design, Space-efficient
• 5 Micron Sediment 10”x 2.5” Plus 3 extra Cartridges
• 5 Micron Block Activated Carbon 9.875”x 2.5 Plus 2 extra Cartridges
• Housing Wrench
• Set of Screw

The Importance of Drinking Clean Water:

Water is critical to proper food digestion, kidney health, brain function, blood health, joint functionality, and more. It's important to make sure that the water you drink is devoid of contaminants. Thankfully, using a Ronaqua water filtration device will ensure consistent quality for all of your drinking and cooking needs. In fact, when you use Ronaqua water treatment devices and filters, your water will be free of chlorine taste and odors, particles, and many other contaminants that can be detrimental to your health.

A Sediment Water Filter removes the physical debris and impurities from your water. The sediment filter has tiny holes through which water is able to pass, however the unwanted particles are not. As these particles come in different sizes, so do the filters. The filter sizes are measured in microns, the smaller the micron measurement, the smaller the holes in the filter, allowing to hold back the smallest of particles. Generally, for water that is more visibly polluted, containing larger particles, a sediment filter of a larger size (such as 20 or 50 microns) is recommended in the first stage of installation to prevent the clogging of the next stage(s) of filters.

This sediment filter is often the first filter installed in the Reverse Osmosis circuit and acts as a net as it catches unwanted particles, including sand, dirt, silt, rust, and other fine particles. Sediment filters are made of fine melted polypropylene, which is then blown and spun into a cylinder-like form. Polypropylene is a substance that is resistant to chemical solvents, bases, and acids. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, to perform better and for longer periods of time.

These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water.

When people say water filter, they most frequently mean a carbon filter of some variety, because since the Egyptians discovered that storing water in charcoal made it stay fresher and taste better, carbon has been a standard feature in water treatment. Its centuries of popularity attest to its effectiveness.

The Standard Activated Carbon Block filters are made of fine coconut shell carbon. They remove odors, undesirable colors, and unpleasant tastes of many organic compounds. These filters also are effective in removing chemicals like iron, manganese, chlorine, and hydrogen sulfide from your water to name a few. By removing these unwanted byproducts, you can rest assured that you will have access to fresh and clean water. Since these filters are made of a finely packed carbon (forming a cylinder block), they offer a much finer filtration of suspended particles and dirt.

Chlorine removal is what carbon is best at, and nothing else equals carbon's ability to remove chlorine.

What is Activated Carbon Block?

There are many types of carbon. Most filter carbon is manufactured from coal, but other substances like wood and nut shells are also used. Coconut shell carbon is becoming popular not only because it is made from a renewable resource but also because it produces very good tasting water and is particularly good at trihalomethane removal.

Besides the physical absorption that the Activated Carbon Block filter can provide, it also filters the water via a chemical process. The Activated Carbon Block filter is positively charged, thus it is able to attract negatively charged particles such as: chlorine, benzine, and other volatile organic compounds, and prevent them from flowing out into your glass. Carbon is well known for its unique absorbing ability; just a pound of carbon is able to provide up 125 acres of filtering surface area.