Set of the two, 1 red and 1 black rubber switch cover part for Hobart mixers and some grinders that had this style switch. These will not fit other aftermarket plates out there that are not manufactured to Hobart and UL specs. or different switch mounting These replace OEM part numbers 102467-1 &102467-2. They fit only over the Hobart OEM sleeves that are approximately 1-1/8" in diameter. These covers keep water and food products out of switches that can cause breakdowns by shorting out, or switch sticking causing mixer to not stay on or shut off correctly. Hobart has made other covers also that are similar but different size, be sure this is the right one before you order! This is the current and most common. Look for 2 screws on each side of switch button sleeve that mount switches to the plate,  if no screws these will not fit . If you have the ceramic switch assy, not mounted to the plate, but is mounted to mixer head with screws these are too small. Nothing is available for the ceramic switch type anymore you have to convert to new style. The larger 80 and 140 quart mixer look for the screws next to the button sleeves no screws this will not fit.

Shipping is same price for 1 set or 20 sets.

 

If you have any questions about this item please ask before you buy.