Repair scratches - how do I proceed?

1. Thoroughly clean the area, if rust is visible remove it carefully with sandpaper (please make sure that the surrounding paintwork is not damaged).
2. For bare plastic parts, we recommend using a plastic adhesive primer, which is applied very thinly to the bare plastic and approx. Leave for 10 to 15 minutes. You can find the plastic adhesive primer in our shop.
   
3. Shake the 1K primer/rust protection paint stick (if necessary) vigorously and apply very carefully with the brush and allow to dry (approx. 10 to 15 minutes should usually be enough ).
4. Then shake the base coat touch-up pen vigorously and carefully apply a thin layer in several layers, leaving it to dry again and again (approx. 10 to 20 mins. ), repeat the whole thing until the base coat has covered, then again for approx. Leave to dry for 15-20 minutes.
5. Then shake the clear coat touch-up stick vigorously and apply carefully, then let it dry properly. The clear coat is usually more viscous than the base coat, so it should be used more sparingly.

Here is a special TIP from us.

If you have a stone chip on a lying surface, such as the hood or roof, we would recommend touching it up with our paint swabs. Simply dip the paint swab into the touch-up pen and carefully fill in the stone chips with this paint. The paint fills in the stone chips nicely and there is no excess of paint. You can also find paint swabs in different versions and quantities in our shop.

Now have fun mending.

 Notice:
All paint sticks are always checked by us for quality and consistency.

Color deviations of the touch-up pen compared to your vehicle are possible due to the age of the vehicle and the weather.

Comment: Be sure to protect from frost! Repairing the damaged car paint using our touch-up pen cannot replace a professional repair in a car paint shop! No liability for improper use.

Rules for the VOC regulation


Since January 1st, 2007, the "VOC regulation" has also applied to car paint dealers.
(2004/42/EC or 1999/13/EC). We have to make sure that customers
with us, for example, a paint that does not meet the VOC specification
also only used for applications covered by the VOC regulation
be mentioned, such as vintage car restoration or das
filling spray cans.

Products that comply with the VOC regulation will continue to be sold without restriction.

Products that do not meet the standards of the VOC regulation may only be used for the following applications.

restoration
of vintage cars filling aerosol spray cans painting of vehicles
Bundeswehr, civil protection, fire brigade and those responsible for maintenance
the forces responsible for the order - painting of vehicles in the
public service are used exclusively in the city area
Industrial painting (e.g. plastic parts without vehicle reference)

The distributor is responsible for ensuring that only VOC-compliant
Products for vehicle painting are sold and more
also ensure that the restricted products are only for the
mentioned applications are used.

I hereby confirm that I am familiar with the legal situation of the ChemVOCFarbV and that I have been sufficiently informed about this by Magic Paints. I confirm that I do not comply with the respective VOC limit values
related products that I purchase from Magic Paints,
used exclusively for the exceptional cases provided for by law
will. The responsibility for the intended use of the at
Items purchased by Magic Paints are hereby transferred to me.