52mm Car Air Fuel Ratio Gauge Meter Smoke Lens Wideband With O2 Oxygen Sensor
52mm Car Air Fuel Ratio Gauge Meter Smoke Lens Wideband With O2 Oxygen Sensor US

 
ATTENTION: IT DOESN'T FIT FOR CARBURETOR!!!!
 
 
Input:
  • WideBand: 0-5V
  • NarrowBand: 0-1V

Feature:
  • 1.This gauge work with Stepper motor and electronic sensor.
  • 2.Stepper Motor is more fast more accurate.
  • 3.Turbo Gauge, Vacuum Gauge, EXT Temp Gauge, Oil Press Gauge, Volt Gauge, Oil Temp Gauge, Water Temp Gauge, Tachometer & Vacuum Gauge are available.
  • 4.Gauge dials are invisible while the ignition switch is off. Once the ignition switch is turned on, a clear display appears with white LED illumination. A red emitting needle pointer increases visibility.
  • 5.The illumination color can be adjustable from white and amber red
  • 6.Double Warning function by a meter's LED lamp and a beep
  • 7. only for 12V vehicles
  • 8.work without the control unit
  • 9.This is universal meter gauges that can fit any car
  • 10.Gorgeous Opening mode and Ending model.


Functions:
  • 1.Peak Setting
  • 2.Color Choose
  • 3.Bright Level
  • 4.Buzzer Type
  • 5.Buzzer Level
  • 6.Open Ceremonies
  • 7.Warning Setting
  • 8.Zero position adjustment
 
Oxygen Sensor Specification:
 
  • OEM:0258006028
  • Working Voltage: DC12V
  • ​Signal Line Voltage: 0-1V
  • Spiral: M18*1.5
  • Use Wrench: 22mm
  • Output Voltage: Maximum value ≥900mv/ minimum value ≤50mv.
  • Response time: (600mV-300mV) ≤100ms.
  • Response time: (300mV -600mV) ≤100ms.
  • Starting time: ≤10s
  • Heating resistance: 8.5~9.5Ω
  • Internal resistance: 200~300Ω
 
The instruction of the Oxygen Sensor:
 
  • The white line is at heater ab
  • Black line signal line C, gray line signal ground D
  • The green wire of the instrument is connected with the black wire of the sensor. The gray line is connected to the negative pole of the battery.
  • One white wire connect with the car shell or battery negative pole.
  • Another white wire connect to the ACC line of ignition switch
  • The white line is the heater and does not distinguish between positive and negative electrodes
  • About the air fuel gauge, please see the installation instructions

Package including:
  • 1 * Gauge
  • 1 * Holder Set
  • 1 * Bolts Pack
  • 1* Narrowband Oxygen Sensor
  • 1 * English instruction
PushAuction