LokSound
5 DCC-MM-SX-M4 Multi-Prototcol Sound and Control Decoder
1.5A, 21MTC NEM6660, 11x15mm Speaker and Enclosure, Blank Sound Files
Part # 58419
HO Scale
LokSound 5 Sound and DCC Control Decoder by ESU is a great choice for HO, S and O Scale locomotive models. LokSound 5 is a true multi-protocol decoder. It supports DCC as well as Motorola, Selectrix and M4 systems. It offers a choice of 14 through to 128 speed steps, two and four-digit addresses in DCC format and up to 32 functions. On RailComPlus(R) systems the decoders register themselves automatically on command stations equipped with the feature. Despite its compact dimensions of only 1-3/16 x 5/8" 30 x 15.5mm it is equipped with a dual speaker output and is supplied with an 11 x 15mm sugar cube speaker and enclosure. Like all products of the LokSound family the LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola, Selectrix and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus the decoders register themselves fully automatically on suitable command stations.
This decoder supports all DCC programming modes and thanks to RailCom you may read out the CV values on the main, provided you have a command station supporting RailCom. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.
Motorola users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Central Unit 6021.
The M4 protocol supports the automatic registration on mfx compatible central units.
The LokSound 5 decoder supports the Mrklin braking sections just as well as the ZIMO HLU braking commands or the Lenz ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations. The LokSound 5 decoder can be used on analogue DC and AC layouts. The LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit - 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 - 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.
The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.
You want your locomotives to be as realistic as possible. Therefore we have packed many function outputs into it. Subject to the type of interface every LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements - known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO and Krois as well as Telex couplers.
Motor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique Auto Tune function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 decoder supplies up to 1.5A motor current, which is quite sufficient even for older motor types. No sound files are pre-loaded - they are available for download per manufacturer instructions in the package.
We are an authorized dealer for Athearn, Walthers, Bowser Trains, Horizon Hobby, Tangent Scale Models, Heartland Hobby, Stevens International, Hobbytyme, RC4WD, Traxxas and Intermountain Railway Company. If you don't see it here please ask if we can order it for you.
We will be happy to refund monies minus shipping costs on any item purchased as long as the item is in the original selling condition as it was listed. Refunds/ returns will be granted within 14 days of the shipping date. The return shipping cost is the responsibility of the Seller. We are not responsible for any damage that occurs during shipping. Package insurance may be purchased at an additional cost to protect against damage in transit. All items are new in box from the manufacturer, unless otherwise stated. Please feel free to email with any questions. Inventory is constantly updated, but we also have a store open to the public that may cause the unavailability of the item when ordering on line. If the item is not available we will promptly refund your money. If an item is returned because of accidental purchase, the buyer will be charged the Ebay and Paypal fees if incurred per policy. We will combine shipping when possible for cost efficiency for the customer. To receive discounts for combined shipping, please purchase all items and request an invoice total, otherwise we may not be able to discount shipping. When requested, we will send you an updated invoice with correct shipping total. All shipments are sent priority mail with delivery confirmation. When the item is shipped we leave feedback regarding the transaction. We would ask that once you receive your package you rate us as well. If you feel you are not satisfied, please contact us to correct the situation. We will do what is necessary to make it right as we value positive feedback. All warranty claims are handled by the manufacturer. Thank you, Shaffer's Train Shed.