• Specifications
    • Condition: New
    • Color:Black
    • Manufacturer Warranty:10 Year
     
  • Package Include
  • For 03-07 Honda Accord 12Pcs Front Ball Joints Control Arms Tie Rod Ends K80228

    Specifications

    • Condition: New
    • Color:Black
    • Manufacturer Warranty:10 Year

     

    Package Include

    • 1x Part# Upper Right Control Arm + Pre-Assembled Ball Joint - K620616
    • 1x Part# Upper Left Control Arm + Pre-Assembled Ball Joint - K620617
    • 1x Part# Front Right Lower Control Arm - K640289
    • 1x Part# Front Left Lower Control Arm - K640290
    • 2x Part# Front Lower Ball Joints - K80228
    • 2x Part# Front Inner Tie Rods Ends Links - EV80208
    • 1x Part# Front Left Outer Tie Rod End Link - ES80288
    • 1x Part# Front Right Outer Tie Rod End Link - ES80287
    • 1x Part# Left Front Stabilizer/Sway Bar Link - K90660
    • 1x Part# Right Front Stabilizer/Sway Bar Link - K90661

     

    Fits the following vehicles

    • 2003 - 2007 Honda ACCORD 3.0 L ; V-6/Fits Both Coupe & Sedan

     

    Note

    • Please be sure you review the compatibility information.
    • If you have a question about the part please free contact us before buying, we will give you a best reply in time.
    • We are galde to offer quality service and vehicle parts to you, any after sale questions please message us before open case or feedback, we will give you the best solution.

     

    Replacement Guideline

    1. Purchase the correct replacement ball joint assembly for your vehicle.
    2. Remove the wheel and access the ball joint.
    3. Soak all the bolts with WD-40 or PB Blaster.
    4. Pull the cotter pin and loosen the large castellated nut.
    5. Pop loose the ball joint. 
    6. Remove the allen bolts and slide the control arm free. 
    7. Guide the new joint through the knuckle hole.
    8. Bolt the joint into place using the hardware included.
    9. Torque the bolts to the proper specifications.
    10. Screw in the new grease fitting and pump grease into the assembly.

     

    Signs of a ball joint breaks

    • Sound -A faint, intermittent clunking noise that seems to be coming from a corner of your vehicle
    • Steering-The steering sloppy or stiff 
    • Tires -Uneven tire wear 

     

    Infiuence of a bad joint break

    • Causing mysterious clunking noise or drifting steering
    • Affecting your steering and suspension seriously 

     

     

     

     

     


    Item Specifics
    Placement on Vehicle Front, Left, Right, Upper, Lower
    Brand auspartshouse
    Manufacturer Part Number 9958434
    Number of Kit Pieces 12 pcs
    Manufacturer Warranty 10 Year
    Fitment Type Direct Replacement
    Mounting Hardware Included No
    Interchange Part Number K620616, K620617, K640289, K640290, K80228
    Suspension Grade Standard
    Custom Bundle Yes
    Modified Item No
    Color Black
    Surface Finish Polished
    Packaging New in Box
    Type Control Arm & Ball Joint Assembly
    Adjustable Yes
    Greasable Yes
    OE/OEM Part Number EV80208 ES80288 ES80287 K90660 K90661
    OE/OEM Part Number 51320SDAA05,51321SDAA05,53540SDAA01,53560SDAA01,51210SDAA02

    Payment
    We use eBay's Safe and Secure Checkout. Just click the Pay Now button at the top of any of the auctions you have won.
     
    To pay for multiple auctions, successfully win all auctions you wish to purchase and then click the Pay Now button on any of the listings you won. You will only have to checkout and pay once for your entire order.
     
    Please review our detailed policies on shipping and fixing any issues before purchasing the item. If you have any questions, please email us through "Ask a question".
     
    Payment Options: Paypal, G Pay, Visa, Mastercard, American Express, and Discover.
     
    Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages within 12 hours.
     
    Payment must be received within 10 days as auction ended or order might be delayed.
    Shipping

    1. More than 90% orders processed within 24 hours of payment verification.

    2. We only ship to the address in order provided to us. Your PAYPAL address will not be recognized as shipping address.

    3. The images shown is the the actual item you will get and the size are for your reference.

    4. If you have not received your shipment within 15 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    Returns

    1. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    2. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    3. Return shipping is to be paid by the Buyer if the problem turned to be buyer's end, or return will be seller's responsibility.

    Feedback

    We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Contact Us

    Any question or problem, please feel free to contact us via ebay message.

    Just Get It NOW
    For 03-07 Honda Accord 12Pcs Front Ball Joints Control Arms Tie Rod Ends K80228

    Specifications

    • Condition: New
    • Color:Black
    • Manufacturer Warranty:10 Year

     

    Package Include

    • 1x Part# Upper Right Control Arm + Pre-Assembled Ball Joint - K620616
    • 1x Part# Upper Left Control Arm + Pre-Assembled Ball Joint - K620617
    • 1x Part# Front Right Lower Control Arm - K640289
    • 1x Part# Front Left Lower Control Arm - K640290
    • 2x Part# Front Lower Ball Joints - K80228
    • 2x Part# Front Inner Tie Rods Ends Links - EV80208
    • 1x Part# Front Left Outer Tie Rod End Link - ES80288
    • 1x Part# Front Right Outer Tie Rod End Link - ES80287
    • 1x Part# Left Front Stabilizer/Sway Bar Link - K90660
    • 1x Part# Right Front Stabilizer/Sway Bar Link - K90661

     

    Fits the following vehicles

    • 2003 - 2007 Honda ACCORD 3.0 L ; V-6/Fits Both Coupe & Sedan

     

    Note

    • Please be sure you review the compatibility information.
    • If you have a question about the part please free contact us before buying, we will give you a best reply in time.
    • We are galde to offer quality service and vehicle parts to you, any after sale questions please message us before open case or feedback, we will give you the best solution.

     

    Replacement Guideline

    1. Purchase the correct replacement ball joint assembly for your vehicle.
    2. Remove the wheel and access the ball joint.
    3. Soak all the bolts with WD-40 or PB Blaster.
    4. Pull the cotter pin and loosen the large castellated nut.
    5. Pop loose the ball joint. 
    6. Remove the allen bolts and slide the control arm free. 
    7. Guide the new joint through the knuckle hole.
    8. Bolt the joint into place using the hardware included.
    9. Torque the bolts to the proper specifications.
    10. Screw in the new grease fitting and pump grease into the assembly.

     

    Signs of a ball joint breaks

    • Sound -A faint, intermittent clunking noise that seems to be coming from a corner of your vehicle
    • Steering-The steering sloppy or stiff 
    • Tires -Uneven tire wear 

     

    Infiuence of a bad joint break

    • Causing mysterious clunking noise or drifting steering
    • Affecting your steering and suspension seriously 

     

     

     

     

     

    Item Specifics
    Placement on Vehicle :Front, Left, Right, Upper, Lower
    Brand :auspartshouse
    Manufacturer Part Number :9958434
    Number of Kit Pieces :12 pcs
    Manufacturer Warranty :10 Year
    Fitment Type :Direct Replacement
    Mounting Hardware Included :No
    Interchange Part Number :K620616, K620617, K640289, K640290, K80228
    Suspension Grade :Standard
    Custom Bundle :Yes
    Modified Item :No
    Color :Black
    Surface Finish :Polished
    Packaging :New in Box
    Type :Control Arm & Ball Joint Assembly
    Adjustable :Yes
    Greasable :Yes
    OE/OEM Part Number :EV80208 ES80288 ES80287 K90660 K90661
    OE/OEM Part Number :51320SDAA05,51321SDAA05,53540SDAA01,53560SDAA01,51210SDAA02


    We use eBay's Safe and Secure Checkout. Just click the Pay Now button at the top of any of the auctions you have won.
     
    To pay for multiple auctions, successfully win all auctions you wish to purchase and then click the Pay Now button on any of the listings you won. You will only have to checkout and pay once for your entire order.
     
    Please review our detailed policies on shipping and fixing any issues before purchasing the item. If you have any questions, please email us through "Ask a question".
     
    Payment Options: Paypal, G Pay, Visa, Mastercard, American Express, and Discover.
     
    Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages within 12 hours.
     
    Payment must be received within 10 days as auction ended or order might be delayed.

    1. More than 90% orders processed within 24 hours of payment verification.

    2. We only ship to the address in order provided to us. Your PAYPAL address will not be recognized as shipping address.

    3. The images shown is the the actual item you will get and the size are for your reference.

    4. If you have not received your shipment within 15 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    1. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    2. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    3. Return shipping is to be paid by the Buyer if the problem turned to be buyer's end, or return will be seller's responsibility.

    We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Any question or problem, please feel free to contact us via ebay message.


    All rights reserved.