![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
Product not applicable Bafang series motor
Features:
100% brand new and high quality!
Can be automatically identified and compatible 36V and 48V Voltage.
It will show the true reflection of the battery charge, real time recording of the power consumption to ensure riding mileage.
The individual joints are clearly set up to help with cost-effective installation.
When connected to a bicycle, this product will display a lot of useful data on your bike, such as riding speed, time, power and temperature.
The color display on the meter makes it easier for you to see the data on the panel.
Product Information
Product name: LCD Control Panel
Color: Black
Material: LCD, Plastic
Voltage: 48V
Power: 1000W
Cable Length:Normal port:1800mm、waterproof:300mm
Product use introduction:
(1) Display Function:
*Speed display, power-assisted gear display, power indicator, fault prompt, total mileage, single mileage, headlights and single driving time display.
(2) Control/Setting Function:
*Power switch control, headlight switch control, 6Km/h boost control, wheel diameter setting, speed limit setting, meter sleep setting, backlight brightness setting, voltage setting.
(3) Harness Description:
①Red (P+) meter power cord
②Blue (VCC) electric door lock wire
③Black (GND) negative wire
④Green (RX) Meter data receiving
⑤Yellow (TX) Meter data transmission
(4) Meter Setting Function:
①Long press the up and down buttons of the meter to enter the meter settings.
*P01: Backlight brightness, level 1 is the darkest, level 3 is the brightest.
*P02: Mileage unit, 0: KM; 1: MILE.
*P03: Voltage level: 24V, 36V, 48V.
*P04: Sleep time: 0, no sleep; other numbers are sleep time, range: 1-60; unit minutes.
*P05: Power assist gear 1-9
*P06: Wheel diameter: unit, inch; precision: 0.1.
*P07: Number of speed magnets: range: 1-100.
*P08: Speed limit: speed percentage range 0-100%, 100 means speed 100%.
*P09: Zero start, non-zero start setting, 0: zero start; 1: non-zero start.
*P10: Drive mode setting 0: power-assisted drive (the handle is invalid).
1: Electric drive (by turning the handle to drive, the power gear is invalid at this time).
2: Power-assisted drive and electric drive coexist at the same time.
*P11: Assist sensitivity setting range: 1-24.
*P12: Assist start intensity setting range: 0-5.
*P13: Power-assisted magnet type setting There are three types of 5, 8, and 12 magnets, of which 5 and 8 are single Hall power-assisted sensors.
②Setting 12 is used for dual Hall assist sensors.
*P14: This function is not available yet.
*P15: This function is not available yet.
*P16: ODO reset setting, Long press the up button for 5 seconds ODO reset
Package Includes:
Option 1:
*1 x Speed Meter with Normal Port
Option 2:
*1 x Speed Meter with Waterproof Port
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
Item Specifics | |
---|---|
Brand | Unbranded |
Part Type | LCD Display |
Voltage | 48V |
Country/Region of Manufacture | China |
EAN | Nicht zutreffend |
Marke | Markenlos |
Teiletyp | LCD Display |
a) Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
b) Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
Spi7-2596
BEST BUSSINESS PARTNER
SW900 LCD Display Meter Control Panel 24/36/48V E-Bike Electric Bicycle Scooter
Product not applicable Bafang series motor
Features: 100% brand new and high quality! Can be automatically identified and compatible 36V and 48V Voltage. It will show the true reflection of the battery charge, real time recording of the power consumption to ensure riding mileage. The individual joints are clearly set up to help with cost-effective installation. When connected to a bicycle, this product will display a lot of useful data on your bike, such as riding speed, time, power and temperature. The color display on the meter makes it easier for you to see the data on the panel.
Product Information Product name: LCD Control Panel Color: Black Material: LCD, Plastic Voltage: 48V Power: 1000W Cable Length:Normal port:1800mm、waterproof:300mm
Product use introduction:
(1) Display Function: *Speed display, power-assisted gear display, power indicator, fault prompt, total mileage, single mileage, headlights and single driving time display.
(2) Control/Setting Function: *Power switch control, headlight switch control, 6Km/h boost control, wheel diameter setting, speed limit setting, meter sleep setting, backlight brightness setting, voltage setting.
(3) Harness Description: ①Red (P+) meter power cord ②Blue (VCC) electric door lock wire ③Black (GND) negative wire ④Green (RX) Meter data receiving ⑤Yellow (TX) Meter data transmission
(4) Meter Setting Function: ①Long press the up and down buttons of the meter to enter the meter settings. *P01: Backlight brightness, level 1 is the darkest, level 3 is the brightest. *P02: Mileage unit, 0: KM; 1: MILE. *P03: Voltage level: 24V, 36V, 48V. *P04: Sleep time: 0, no sleep; other numbers are sleep time, range: 1-60; unit minutes. *P05: Power assist gear 1-9 *P06: Wheel diameter: unit, inch; precision: 0.1. *P07: Number of speed magnets: range: 1-100. *P08: Speed limit: speed percentage range 0-100%, 100 means speed 100%. *P09: Zero start, non-zero start setting, 0: zero start; 1: non-zero start. *P10: Drive mode setting 0: power-assisted drive (the handle is invalid). 1: Electric drive (by turning the handle to drive, the power gear is invalid at this time). 2: Power-assisted drive and electric drive coexist at the same time. *P11: Assist sensitivity setting range: 1-24. *P12: Assist start intensity setting range: 0-5. *P13: Power-assisted magnet type setting There are three types of 5, 8, and 12 magnets, of which 5 and 8 are single Hall power-assisted sensors.
②Setting 12 is used for dual Hall assist sensors. *P14: This function is not available yet. *P15: This function is not available yet. *P16: ODO reset setting, Long press the up button for 5 seconds ODO reset
Package Includes:
Option 1: *1 x Speed Meter with Normal Port
Option 2: *1 x Speed Meter with Waterproof Port
Note: 1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2.Please allow slight manual measurement deviation for the data.
Payment
a) Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. b) Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
Shipping
Returns
Contact Us
Feedback
100% Customer satisfaction is our top priority.
All rights reserved. |
Shop Category New List Item Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |