This assembly comes with N male and Ts9 male connectors

LMR-195 Coaxial cable is a very popular product within the Times Microwave LMR coaxial cable range. The LMR range is recognised globally as the industry standard ultra low loss, flexible, low cost, lightweight, DC – 6GHz coaxial cable solution for many RF applications. This is also backed up by the best warranty and technical support in the business.

Why choose LMR-195?

LMR-195 has excellent reliability, unsurpassed flexibility and ultra low attenuation. The LMR-195 cable is a drop in performance upgrade for RG-58 and RG-142. This means the LMR-195 cable has similar mechanical specifications however the electrical performance is much higher.

How is the LMR-195 performance higher than competing RG cables?

This is achieved due to the cable construction specifications. The centre conductor uses a high conductivity, Bare copper clad covered aluminium centre conductor material. The dielectric is nitrogen injected, foamed, closed cell, Polyethylene which helps achieve 80% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor, which is chemically bonded on to it. Due to the cable construction, The attenuation is significantly lower and VP is higher as compared to single shielded RG coaxial cables.

LMR-195 =80% VP

RG-58= 66% VP

RG-142= 69% VP

Outer Jacket

All standard LMR coaxial cable comes with a UV resistant, PE Jacket. This helps to ensure the cable jacket can withstand harsh outside environments and UV rays from sunlight, this is designed to last for up to 20 years of outdoor service.

Frequency Operating Band

LMR-195 is designed to operate excellent from DC – 6GHz. For any frequency band at VHF and above LMR is the obvious choice.

Should you find your RF system operates at above 1GHz, LMR is once again, your best option, as RG cable typically isn’t compatible with any frequency in excess of 1GHz.

 Applications

LMR-195 Flexible Low Loss Communications Coaxial Cable is ideal for:
  • Jumper Assemblies in Wireless Communications Systems
  • Short Antenna Feeder runs
  • WLL
  • GPS
  • LMR
  • WLAN
  • WISP
  • WiMAX
  • SCADA
  • Radio antennas or receivers
  • TVRO
  • Mobile Antennas

Attenuation dB figures per 100m    Mechanical Specifications Temperature range: -40⁰C – +85⁰C 

30 MHz : 6.5dB   Bend Radius: installation 12.7mm    Inner Conductor: Solid BC (0.94mm)
50 MHz : 8.4dB   Bend Radius: repeated 50.8mm       Dielectric: Foam PE (2.79mm)
150 MHz : 14.6dB   Bending Moment: 0.27Nm                Outer conductor: Aluminium tape (2.95mm)
220 MHz : 17.7dB   Weight lb/ft 0.03Kg/M                       Overall Braid: Tinned copper (3.53mm)
450 MHz : 25.5dB Tensile Strength 18.2Kg                      Jacket: Black PE (4.95mm)
900 MHz : 36.5dB   Flat Plate Crush: 0.27Kg/mm
1500 MHz : 47.7dB
1800 MHz : 52.5dB
2000 MHz: 55.4dB
2500 MHz: 62.4dB
5800 MHz: 98.1dB
8000 MHz: 117.1dB

This assembly comes with N male and Ts9 male connectors

All Assemblies are custom made to order, We can supply and assemble any size cable and connectors, If you cant find what your looking for please message us and we’ll be happy to help with your requirements.

LMR-195 Coaxial cable is a very popular product within the Times Microwave LMR coaxial cable range. The LMR range is recognised globally as the industry standard ultra low loss, flexible, low cost, lightweight, DC – 6GHz coaxial cable solution for many RF applications. This is also backed up by the best warranty and technical support in the business. This is achieved due to the cable construction specifications. The centre conductor uses a high conductivity, Bare copper clad covered aluminium centre conductor material. The dielectric is nitrogen injected, foamed, closed cell, Polyethylene which helps achieve 80% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor, which is chemically bonded on to it. Due to the cable construction, The attenuation is significantly l