Important tips to follow when applying Command™ Picture Hanging Strips: wait 7 days after painting before use, do not apply strips to paper or soft surfaces on frame, remove hanging hardware from back of frame, failure to follow instructions carefully may cause damage.
Do not hang over beds or on wallpaper. Do not hang valuable or irreplaceable items. Use indoors 50º - 105ºF.
1. Wipe wall with rubbing alcohol. Do not use household cleaners or water.
2. Separate strips. Click strips together.
3. Remove one side of liners. Stick on frame as shown. Press firmly.
4. Remove remaining liners. Press frame firmly to wall.
5. To ensure adhesive hold, temporarily remove frame from wall to reinforce strips. Peel frame as shown. Press each strip on wall for 30 sec.
6. Wait 1 hour for adhesive to build. Align strips. Press frame until each pair of strips clicks.
Easy to Remove
For damage-free removal, slowly stretch the strip straight down against the wall.
1. Grab bottom corners and peel frame from wall. Do not pull straight off.
2. Never pull away from wall.
3. Stretch strips slowly against the wall at least 15 inches (38 cm) to release.
To what surfaces will Command™ Picture Hanging Strips stick?
Painted, stained or varnished wood, glass, tile, metal, painted drywall and other smooth surfaces.