Permatex® - Plastic Tank Repair Kit - Screenwash Bottle, Water Expansion #09100
Permatex
Plastic Tank Repair Kit
#09100
PRODUCT DESCRIPTION
Permatex’s Plastic Tank Repair Kit contains everything required for making a professional-quality permanent repairs in just minutes. These state-of-the-art components and easy-to-follow instructions with photographs and can be used to repair all types of plastic tanks. The repair resin is designed to harden within 8 to 10 minutes and cure in 30 minutes.
Features:
Complete kit contains everything required for making professional quality repairs in minutes
Repair resin is designed to harden within 8-10 minutes and cure in 30 minutes
Repairs can be made ideally at temperatures from 50oF to 75oF (10oC to 24oC)
Repairs cracks up to 4" in length and holes up to 3/8" in diameter
NOTE: Not for use on plastic fuel tanks
DIRECTIONS:
The
repair resin is designed to harden within 8 to 10 minutes and cures in
30 minutes. Read all directions before beginning repair. Repairs can be
made ideally at temperatures from 50°F to 75°F (10°C to 25°C). Repairs
made at lower temperatures will take longer to cure.
Repairs can be made on cracks up to 4 inches in length and holes up to
3/8 inch in diameter. 1. Drain tank or reduce fluid level at least 2
inches below damaged area. 2. Prepare damaged area by removing any oil,
grease, tar or dirt, etc. from repair area. Sand the affected area to at
least 1 inch beyond the damage. A 3. For cracks that may continue to
expand, drill a small hole at each end of the crack. 4. Clean the area
with alcohol swab. B
5. Cut the fiberglass cloth to fit within the sanded area. 6. The resin
must be mixed and applied in less than 8 minutes as the resin will begin
to harden. Mix the resin as follows: Burst the seam that separates the
two materials by applying pressure to one side. Knead the contents of
the pouch back and forth until the mixture is of uniform color (mix for
2 minutes maximum). C 7. Cut off the top of the pouch and dispense some
of the resin mixture onto the damaged area. D 8. Spread the resin
mixture in a uniform layer with the supplied brush onto the area to be
covered by the fiberglass. (Note: The material will become warm to
touch.) 9. Place the fiberglass over the resin covered area. Spread the
remaining mixture over the fiberglass until it is completely saturated.
E,F 10. Taper the edges of the repair area beyond the fiberglass. Smooth
the repaired area with the brush. G Repair will be complete when the
resin cures in 30 minutes. Tank may be refilled after 30 minutes or when
the repair is tack free.
Permatex: Products designed for the DIY'er or the Industrial Professionals. Carrying a vast range of products designed for the Automotive and Engineering industry. Premium quality products, offer the best product at a very reasonable price. Permatex has been used around the world since 1909. Proven in Garages, Workshops, Racetracks and Service stations. Developed on Racetracks and dragstrips quality is continually tested to the Red Line, to ensure a constant performance over and over again. Vast range of products from Sealants, Threadlocks, Gasketmakers, and Epoxys, all of exceptional quality. View our ebay shop for the current range available. Items in stock and ready for immediate dispatch.
We are dedicated to ensuring the highest possible quality service to our customers.
Click to expand the tabs below to read more about our policies.
