The Direct4x4 aftermarket side step and running board range offer incredible style and quality at a very affordable price. Made from premium materials throughout, these side steps are designed to be convenient and practical whilst adding an extra touch of luxury to your pride and joy.
Please note: To fit these running boards you may need to trim or remove the rubber strip on the back of the step.
Please note: You may need to cut the brackets down slightly under the board to fit the side steps closer to the vehicle if that is what you would prefer.
- Package includes 2 steps and all the brackets, bolts and fixings necessary for your specific vehicle.
- Very easy to fit, clean and maintain. No drilling required! The brackets install conveniently to existing bolt holes in your vehicle's chassis. Fitting takes just a couple of hours.
- Protects your car from damage caused by dirt and asphalt thrown up by your tires as well other car doors in tight car parking spaces.
- Provides a sturdy platform structure. The boards are 30mm (1.18 inches) thick and are 105mm (4.13 inches) wide with an actual step width of 95mm (3.74 inches).
- The heavy-duty Q235A grade steel brackets have undergone a 2-stage powder coating process for longer life.
- Simple, no-nonsense all-black blastic styling down the length of the board.
- Low-profile black sidewall.
Important Information
- Some vehicles may have plastic undertray shields covering the side step bolt holes. These will need to be removed before fitting the steps and before re-fitting will need to be trimmed around the bolt locations using a dia cutter or something similar. If you have any questions, please contact us.
- Please DO NOT use car cleaning products which contain TFR (Traffic Film Remover) chemicals on metallic products as it can cause corrosion. Cleaning Direct4x4 products with said solutions may invalidate their warranty.
- We strongly advise examining any bolts, brackets or fixings 7 days after original installation to ensure that they are tight and secure. For your safety, we recommend inspecting all fixtures every 3-6 months.
IMPORTANT INFORMATION
- For the majority of our side steps/bars, no chassis drilling will be required. Undertray shields will need to be removed before fitting and trimmed around the bolt locations using a dia cutter or something similar. If you have any questions, please contact us.
- Ensure you have received all necessary components; if there's anything missing let us know right away.
- Avoid using TFR (Traffic Film Remover) products as this may cause corrosion and invalidate the warranty.
- For safety, check all bolts/brackets 7 days after installation and inspect all fixtures every 3 months.