1. High brightness digital tube clear display, whether it is day or night use, can be clearly read
2. Sensor using 2P terminals can be replaced at will, when you need to use other probes, can be replaced at will
3. ABS material shell, exquisite and beautiful, high mechanical strength, good electrical performance, anti-aging
4. -50~110℃ ultra-wide temperature control range, can be used in various temperature control fields, 0.1℃ temperature control accuracy, to meet your control needs
5. Wiring input and output design, more convenient to use in a variety of industrial control equipment, multi-stranded wire 300V/20A overload configuration, safe and reliable
|
Model |
DM-W3001 |
XH-W3001 |
DM-W3002 |
XH-W3002 |
|
Temperature measuring range |
-50℃-125℃ |
-50℃~110℃ |
-50℃-100℃ |
-50~110℃ |
|
Temperature measurement accuracy |
±0.2℃ |
|||
|
Temperature control accuracy |
±0.1℃ |
|||
|
Measurement inputs |
NTC (10K 0.5%) waterproof sensor, approx. 0.5m long |
NTC10K L=1m waterproof probe |
||
|
Supply voltage(optional) |
DC12V/DC24V/AC110-220V |
|||
|
Output power |
120/240/1500W |
|||
|
Output type |
Direct output |
|||
|
Output capacity |
max 10A |
|||
|
Installation hole distance |
73mm(hole size:4MM)
|
|||
|
External dimensions |
60*45*31mm |
|||
1*Digital Display Thermostat
W3001 Microcomputer controller instruction
Product name:Microcomputertemperature controller
Power supply:12V/24V/220V
Temperature detect range: -50℃-110℃
Temperature control range:-50℃-110℃
Temperature accuracy:0.1℃
Measurement input:NTC10K waterproof L=1m
Output type :Output direct
Max capacity :Max 10A
Installment pitch of holes:73MM (hole pitch 4MM)Panel introduction
Prompt：The input voltage and output voltage is synchronous of this temperature controller .In other words ,when temperature controller under the status of working (indicator light is
bright),input voltage equal to output voltage ,when temperature controller under the status of break (indicator light goes off),no voltage output from output terminal.
Indicator light bright means output from terminal.
Indicator light goes off means no output from terminal.
Heating mode setting solution
Setting method : Start-up temperature＜stop temperature(procedure judge the working mode as heating automatically)
Setting method:
Press the up-regulation keyboard ,light flashing when started-up temperature, set start temperature value by press up and down button.
Press the down-regulation keyboard ,light stop flashing when stopped temperature, set stop temperature value by press up and down button.
Use case:
Control water heater, stop heating at 65℃,reheating when temperature fallen to 50 ℃.
Setting solution:
STEP1:Make sure the working mode is heating, start-up temperature＜stop temperature
STEP2：Press up-regulation keyboard to start temperature flashing and set starting- temperature at 50 ℃ by pressed up and down button
STEP3：Press down-regulation keyboard , Stop tand down button.
Press down-regulation keyboard , stop temperaturemperature light flashing ,Setting up and down
button to stop temperature at 65 ℃ then complete setting.
Cooling mode setting solution
Setting method :Start-up temperature >Stop temperature (producer judge working mode as cooling automatically).
Setting method:
Press up-regulation keyboard ,start temperature flashing ,setting start temperature value by pressed up e flashing, setting stop temperature value by pressed up and down button.
Use case:
Control farm: blower regulate temperature at 26℃,it will start cooling again when temperature return 28℃ .
Setting method:
STEP1:Make sure the working mode is cooling ,started up temperature ＞ stop temperature
STEP2:Press up-regulation keyboard to start temperature flashing and set starting- temperature at 28 ℃ by pressed up and down button
STEP3:Press down-regulation keyboard to stop temperature flashing and stop temperature at 26 by pressed up and down button then complete setting.
Manual instruction
Setting start-up temperature
Press UP- regulation keyboard and display starting-up temperature press the up-regulation keyboard 3 seconds to start temperature digits flashing, Set value of temperature by up and down regulation keyboards.
Setting stop temperature.
Press the down-regulation keyboard to display stop-temperature ,press the down-regulation keyboard 3 seconds to stop temperature digits flashing.
Factory reset:
In the case of electricity, press the up and down regulation keyboard in the same time digital tube displaying “888” then strip into temperature detection automatically then restore factory s.