• DURABLE STRUCTURE: 10”x 4.5” Transparent Housing Set is proper for high-flow applications. The housing body is made of reinforced polypropylene for strength & resistance to chemicals, the black cap is made of high-flow polypropylene for toughness. Food grade material makes all filtered water is safe & healthy. The cap has 1" inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. This unit is appropriate for well water, commercial & industrial filtration.

• POINT OF USE: Those Housings for use in various high-flow applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, well water filtration, food service, and irrigation. Extends life of Washing Machines, Water Heaters & Other Household Appliances Keeps water fresh by reducing and removing iron, manganese, chlorine, hydrogen sulfide, herbicides, pesticides, and other industrial chemicals.

• EASY TO OPERATE: There are 2 rubber O-rings on the top of the housing body to ensure a watertight seal. Such design allowed properly seal cap and housing body to prevent water leakage when you replace cartridge. The built-in red pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. According to system size leave 4 inches free space should be left between bottom of the system and floor to allowed easy filter cartridge replacement.

• ACCEPTS 10”x 4.5” Big Water Filter Cartridges as: Ronaqua, 3M 70020162437, DuPont WFHDC8001, Watts MAXETW-FF975, ClearChoice 84629, Liquatec CB-450-975-05, SDF-45-1005, CTO2-HD10, Pelican CB-BB-10, EP-BB, EPM, CCBC & CEP Series, DGD-5005, Trojan CB-BB-10, WCBFF975, American Plumber WDGD-5005, Aqua-Pure AP810, AP814 and AP811, Pentair DGD-5005, 9108-44, DEV9108-44 (Sold Separately)

• WELL-MATCHED MODELS OF HOUSINGS: BIG-CLEAR-LX-10 and A48249, Aqua Filter Plus 150237-INSTKIT, BLUONICS BLBB20GAC, BLBBC10 and BLBB10x2, iSpring HB18B, OMNIFilter BF7-S-05 and BF7-S-S06, American Plumber W10-PR, Watts W10FFPH1CBPR, SimPure RSWHB001Z_S8, AB-WH10BBN, Geekpure BB-10T and BB-10B, EcoPure EPWO4, Culligan HD-950A, Aquaboon AB-WH10BB-1S10BB5M

Description:

• The 10"x 4.5" Transparent High Capacity Housing for Whole House Water Filtration System with 1" Inlet / Outlet Ports (RA-HS-6T) is proper to use for reducing sediment, dirt, rust, & suspended particles in incoming water to you house.
• The transparent housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene for toughness.
• The black cap has 1" inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes.
• The Double rubber O-ring on the top of the housing body to ensure a watertight seal.
• A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges.
• Those Housings for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, food service, and irrigation.
• Easy to connect multiply housings in one Custom Whole House Water Filtration System to fit your specific needs.

WARNING: OPERATING PRESSER NO MORE THAN 60 PSI

Following Cartridges Excepted by This System (Sold Separately)

Sediment Filter is often the first filter installed in the Whole House Water Filter circuit. It is often the first point of contact between your water supply and your home and is used as a pre-filtration unit before the water continues to reverse osmosis and activated carbon filters. It catches unwanted particles, including sand, dirt, silt, rust, and other fine particles as they attempt to enter your house’s water system. These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water.

10" x 4.5" filters are made of fine-melted polypropylene that are blown and spun into cylinder-like form. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, as well as household water appliances like boilers, refrigerators, ice-makers, and many more, to perform better for longer periods of time.

Removes:

• Sediment
• Rust
• Sand
• Particles

Pleated sediment water filters reduces sand, dirt, silt, rust, & scale particles in residential and commercial water. Pleated filters are made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. These materials trap suspended particles, materials that block microbes and adsorb unwanted chemicals or substances that cause a chemical change to the water, such as acid neutralization. The pleated design provides an amplified surface area that may extend the filter’s life while removing undesirable particles and chemicals from the water by means of a semipermeable barrier, adsorption, & biological processes. Those filters are washable & reusable.

Advantage of pleated filters is that they protect against a lower pressure drop & allow increased water flow rates. Pleated cartridges outperform standard wound, spun, & melt blown filters because of their re-usability.

Removes:

• Sediment
• Rust
• Sand
• Particles

Activated Carbon Block filters are made of fine coconut shell carbon. They remove odors, undesirable colors, and unpleasant tastes of many organic compounds. These filters also are effective in removing chemicals like iron, manganese, chlorine, and hydrogen sulfide from your water to name a few. By removing these unwanted byproducts, you can rest assured that you will have access to fresh and clean water. Since these filters are made of a finely packed carbon (forming a cylinder block), they offer a much finer filtration of suspended particles and dirt.

Chlorine removal is what carbon is best at, and nothing else equals carbon's ability to remove chlorine.

Removes:

• Chlorine
• Odor
• Taste
• Pesticides

Granular Activated Carbon filters are made of fine coconut shell carbon. They remove odors, undesirable colors, and unpleasant tastes of many organic compounds. These filters also are effective in removing chemicals like iron, manganese, chlorine, and hydrogen sulfide from your water to name a few. By removing these unwanted byproducts, you can rest assured that you will have access to fresh and clean water.All Ronaqua GAC filters are made with high quality coconut shell carbon crushed into positively charged granules. The positively charged granules in the filter remove negative ions from the water, such as: chlorine, fluorides, ozone, and dissolved organic solutes, effectively providing good general-purpose drinking water.

Chlorine removal is what carbon is best at, and nothing else equals carbon's ability to remove chlorine.

Removes:

• Chlorine
• Odor
• Taste
• Pesticides

Forget about dirty bad-smell and bad-tasting water. High capacity water filtration system will efficiently remove sediment, large and fine particles, chlorine, odors, and tastes of many organic compounds extend the service life of water heaters, washing machine, dishwashers, reverse osmosis systems, and all plumbing fixtures.

Our individually designed whole house water filtration system by removing, chlorine, and other contaminants, provide clean and fresh water for your family, protect your loved ones, and reduce the use of bottled water. We are proud to deliver the perfect water your household and safe our Planet by reducing use of the plastic bottles.

High capacity, durable construction, high quality material, easy operation offered by Ronaqua water filtration systems will save your time and money to supply your whole house with crystal clean water.

These housings made from food grate material and meet NSF (National Science Foundation) standards and regulations. Tanks to durable construction, and easy maintenance those housings can be used in many different applications:

• Food and Beverages
• Oil and Gas
• Fine Chemicals
• Electronics
• Metal Finishing
• Pulp and Paper