Features:​
  • Mount the new Bosch Kiox 300 e-bike display above your stem with this MagCAD Mount.
  • Allows clear sight of the Bosch display whilst keeping the unit better protected from dirt and debris.
  • Weighs 15 grams without hardware.
Please note: The Bosch Kiox display and Bosch Front Plug Interface (Code: EB13100009) are pictured for reference only and not supplied. See below for further details.

What's Included
1x 3D printed mount, 2x M3x10mm cap screws, 1x M6x35mm countersunk screw.

A Bosch Rear Plug Interface is typically supplied with the Bosch Smart System. For this MagCAD E-Stem 300 Mount you will require the Bosch Front Plug Interface (Code: EB13100009), to allow the cables to exit the mount towards the front of your bike.

For UK customers, the Bosch Front Plug Interface can be purchased together with the MagCAD mount from the team at True North Cycle Hub, who helped us develop the mount.

For international customers, you will need to source the Bosch Front Plug Interface from your local Bosch dealer. If in doubt, feel free to drop us a message.

Overview
This mount is the first collaboration with our friends at True North Cycle Hub in the Peak District, specialists in e-bikes and all things MTB.

The mount allows you to position the new 2022 Bosch Kiox 300 e-bike display above your MTB stem, removing the requirement for the fairly bulky and unsightly stock handlebar mount. The stem position allows clear sight of the Bosch display whilst keeping the unit better protected from dirt and debris.

Developed in some of the best and harshest MTB terrain in the UK, the MagCAD mount is extremely robust, designed to out-perform and out-last other display mounts and keep your device secure.

​Application
This MagCAD mount has been designed to suit as many MTB stems as possible, irrespective of stem length or angle. The mount can be fitted directly on top of the stem or position raised with a steerer spacer underneath.

To fit the MagCAD mount follow the below instructions. As with any steering related component they should be installed by a competent mechanic and inspected regularly. Incorrect assembly or mis-use may result in damage to the headset components.
  1. Fit the Bosch front plug interface (not supplied) to the MagCAD mount and torque tighten the 2x M3 cap screws (supplied) to 1Nm.
  2. Loosen the bolts securing the stem to your fork steerer.
  3. Remove your existing top cap and bolt, these are no longer required.
  4. Fit the MagCAD mount and supplied M6 countersunk screw.
  5. Align the MagCAD mount and handlebars with your front wheel.
  6. Torque tighten the M6 countersunk screw following the normal manufacturer's instructions or until all play is removed from your headset bearings, without overtightening. Typically this torque value is around 1-1.5Nm but should not exceed 3Nm.
  7. Torque tighten the bolts securing the stem to your fork steerer to the manufacture's values.
  8. Pass the two Bosch connectors through the MagCAD mount and click into the display interface.
  9. Attach your Bosch Kiox 300 display in the same way you did before, hook the display over the top of the interface before pulling down and securing the bottom.
Material
MagCAD Mounts are 3D printed in Nylon PA12. However these are not your typical home 3D printers. Following a process of SLS (Selective Laser Sintering) on industrial size printers, costing anything above £100k, the resulting mounts have fantastic resolution and refinement. The surface finish is slightly rough with a matte effect and the performance of the mounts are comparable to injection moulded parts.
​
About Me
I’m a MEng Aerospace Engineer and former professional cyclist. All the items, including this mount, are ones which I’ve developed and use myself. A hobby which I take too far but want to share with others.

Feel free to get in contact with any questions or feedback. Individual customisation will be considered.

Delivery
All items in stock and dispatched promptly, usually the same day.

Returns
Should you have any issue or just change your mind we're happy to accept returns within 30 days, providing the item is unused.