Please check the camera size carefully before make the order.
(Below Car type and years Just for a reference, please check your license plate lamp size )
For (for reference)
Mercedes-Benz R500 2006-2008
Mercedes-Benz R63 AMG 2007
Mercedes-Benz R350 2006-2015
Mercedes-Benz R320 2007-2009
C-Class W203 from 2000-2007
E-Class W211 from 2002-2008
CLS-Class 300 W219 2004-2014
Specification:
· Image Sensor: CMOS
· Effective Pixels: 640 * 480
· Horizontal Resolution: 480 TVL
· Minimum Illumination: 0.01 Lux / F = 1.2 (0Lux with IR on)
· Night Vision: 5-10meters
· Lens: 2.8mm
· Diagonal Viewing Angle: 170 degree
· Synchronization: Internal synchronization
· Signal to noise ratio: >48db
· Signal System: NTSC
· Electronic Shutter: Auto
· Video Output: RCA interface, 1.0Vp-p, 75Ohm
· White Balance: Auto
· Backlight Compensation: Auto
· Power: DC 12V
· Current Consumption: 50-60mA, Max 130mA with IR on
· Operating Temperature: -20°C~ +60°C, RH95% Max
· Storage Temperature: -30°C ~ +80°C, RH95% Max
· Video cable length: 6m
· Power supply cable length: 1m
· Waterproof: IP68
Features:
· Weatherproof
· Support NTSC Video system.
· High-definition and wide viewing angle.
· Applicable to variety of Vehicles: car, truck, RV, mini-van etc.
· Easy to install, you can install the monitor via mount holder or universal bracket.
· 6m Video cable.
· Can help avoid incidents and accidents abrasion well.
Package Content:
· 1x Car Rear View Camera
· 1x6m Video Cable
· 1x1m Power Cable
Install tips
Take out your license plate light at the back of your car.
Fix the camera to where the stock license plate light was.
Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power
Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative.
Connect the video cable of the camera to the extension cord.
Connect the extension cord to your car monitor.
You will see the images when your car is in reverse shift.