LMR-100A-UF

LMR-100A-UF cable, Manufactured by Times Microwave systems is designed for low loss general-purpose applications. The LMR-100A-UF was designed as a much more flexible alternative to the LMR-100A cable. This is achieved by employing a stranded centre conductor and a TPE rubber outer jacket.

The LMR range is recognised globally as the industry standard ultra low loss, flexible, low cost, lightweight, DC – 6GHz coaxial cable solution for many RF applications. This is also backed up by the best warranty and technical support in the business.

Click here for our LMR100 Assemblies

Click here for our Assembly Tools

Click here for longer lengths

 How is the LMR-100A-UF low loss figures achieved?

This is achieved due to the cable construction specifications. The centre conductor uses a high conductivity, Stranded bare copper centre conductor material. The dielectric is nitrogen injected, foamed, closed cell, Polyethylene which helps achieve 66% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor, which is chemically bonded on to it. Due to the cable construction, The attenuation is significantly lower as compared to single shielded coaxial cables.

Outer Jacket

The LMR-100A-UF comes with a black TPE Jacket.

Frequency Operating Band

LMR-100A-UF is designed to operate excellent from DC – 6GHz. For any frequency band at VHF and above LMR is the obvious choice.

 Applications

LMR-100A-UF Flexible Low Loss Communications Coaxial Cable is ideal for:

• Drop-in Replacement for RG-316/RG-174 (uses standard connectors)
• Jumper Assemblies in Wireless Communications Systems
• Short Antenna Feeder runs
• WLL
• GPS
• LMR
• WLAN
• WISP
• WiMAX
• SCADA
• 3G or 4G repeaters
• Radio antennas or receivers
• VSAT Applications
• TVRO

Attenuation dB figures per 100m   Mechanical Specifications            Temperature range: -40⁰C – +85⁰C 

30 MHz : 12.9 dB                                 Bend Radius: installation 6.4mm       Inner Conductor: Stranded BC (0.46mm)

50 MHz : 16.7 dB                                 Bend Radius: repeated 25.4mm        Dielectric: Foam PE (1.52mm)

150 MHz : 29.4 dB                               Bending Moment: 0.014Nm               Outer conductor: Aluminium tape (1.65mm)

220 MHz : 35.8 dB                               Weight lb/ft  0.014Kg/M                     Overall Braid: Tinned copper (2.11mm)

450 MHz : 51.9 dB                               Tensile Strength  6.8Kg                     Jacket: Black PVC (2.79mm)

900 MHz : 74.9 dB                               Flat Plate Crush: 0.18Kg/mm

1500 MHz : 98.7 dB

1800 MHz: 109.0 dB

2000 MHz: 115.5 dB

2500 MHz : 130.6 dB

5800 MHz: 210.3 dB