TPMS Reset tool Auto EL-50448 Tire Pressure Monitor Sensor OEC-T5 For GM vehicle
Product Description
We focus on high quality products
-Each item is strictly tested before shipment
-Perfect match for the car
-each parcel will be carefully packaged
Part Number :
EL-50448
Package Include:
1 X EL-50448 TPMS Reset Tool( Notice:The package does not include battery, a 9 Volt battery is needed)
3fitment
FITS:
FOR GM Buick ENCORE ENCLAVE ENVISION LACROSSE REGAL SPORTBACK REGAL TOURX
FOR GM Chevrolet Malibu XL Cruze Kovaz Explorer Comalo 6 Kurod
FOR GM Cadillac SLS2.0T XTS XLR Evoq Imaj Vizon Cien Sixteen XT5
FOR GM GMC SAVANA SIERRA TERRAIN YUKON
FOR GM Holden
FOR OPEL Merlin Safari Yate Yingya Opel Aglia Corsa Astra Insignia Meriva Zafira Antara Combo
FOR Hummer H1 H2 H3 Alpha SUT SUV Dirt Sport H3T Concept
FOR PONTIAC Sunfire Grand Am Prix bonnevi 11e
FOR Vauxhall Jonior DX Daewoo Isuzu Suzuki Subaru Lotus
FOR SATURN
FOR Vauxhall SAAB 92 93 GT750 94 95 96 Sport Formula Junior 97 99 90
[Suitable for all of the above models]
For vehicles equipped with a 315 MHz Tire Pressure Monitoring (TPM) system, a Sensor Re-Learn Procedure must be performed after tire rotations,
Remote Control Door Lock Receiver Module replacement or Tire Pressure Sensor replacement. This re-learn procedure can be performed by using special tool EL-50448.
Before tire pressure monitoring system works normally properly, the body control module will record ID information of each position in the tire pressure sensor;
and use the following methods to read the tire pressure sensor after replacing a tire or wheel speed sensor:
Step 1 - Enter leaning mode
Set the gearshift lever to "P"
Put the ignition switch to "ON"
Enter the interface of tire pressure display by DIC
DIC shows "Press Set / Ctrl to re-learn"
Press "Set / Ctrl"
The turn signal is lighted for 3 seconds and the horn beep sound twice to enter the learning mode
Step 2 - Read tire pressure sensor information
Start from the front-left wheel,
Make the J-46079 or Diagnostic Tool EL-50448 antenna up against the valve core position & close to the rim of the tire sidewall
El-50448 tire pressure tool starts by the start switch
Successful to read the tire pressure sensor information when the horn bleeps once
Step 3 - Same method to read other tire pressure information
Follow the instuction above to read tire pussure of the front-right, rear-right, rear-left wheels.
Turn signals is lighted for 3 seconds and the horn bleeps twice when the learning is complete.
For certain vehicles equipped with a Tire Pressure Monitoring (TPM) system, a "Sensor Re-Learn Procedure" must be performed after tire rotations, Remote Control Door Lock Receiver Module replacement or Tire Pressure Sensor replacement. This re-learn procedure can be performed by using special tool 50448
-Each item is strictly tested before shipment
-Perfect match for the car
-each parcel will be carefully packaged
Part Number :
EL-50448
Package Include:
1 X EL-50448 TPMS Reset Tool( Notice:The package does not include battery, a 9 Volt battery is needed)
3fitment
FITS:
FOR GM Buick ENCORE ENCLAVE ENVISION LACROSSE REGAL SPORTBACK REGAL TOURX
FOR GM Chevrolet Malibu XL Cruze Kovaz Explorer Comalo 6 Kurod
FOR GM Cadillac SLS2.0T XTS XLR Evoq Imaj Vizon Cien Sixteen XT5
FOR GM GMC SAVANA SIERRA TERRAIN YUKON
FOR GM Holden
FOR OPEL Merlin Safari Yate Yingya Opel Aglia Corsa Astra Insignia Meriva Zafira Antara Combo
FOR Hummer H1 H2 H3 Alpha SUT SUV Dirt Sport H3T Concept
FOR PONTIAC Sunfire Grand Am Prix bonnevi 11e
FOR Vauxhall Jonior DX Daewoo Isuzu Suzuki Subaru Lotus
FOR SATURN
FOR Vauxhall SAAB 92 93 GT750 94 95 96 Sport Formula Junior 97 99 90
[Suitable for all of the above models]
For vehicles equipped with a 315 MHz Tire Pressure Monitoring (TPM) system, a Sensor Re-Learn Procedure must be performed after tire rotations,
Remote Control Door Lock Receiver Module replacement or Tire Pressure Sensor replacement. This re-learn procedure can be performed by using special tool EL-50448.
Before tire pressure monitoring system works normally properly, the body control module will record ID information of each position in the tire pressure sensor;
and use the following methods to read the tire pressure sensor after replacing a tire or wheel speed sensor:
Step 1 - Enter leaning mode
Set the gearshift lever to "P"
Put the ignition switch to "ON"
Enter the interface of tire pressure display by DIC
DIC shows "Press Set / Ctrl to re-learn"
Press "Set / Ctrl"
The turn signal is lighted for 3 seconds and the horn beep sound twice to enter the learning mode
Step 2 - Read tire pressure sensor information
Start from the front-left wheel,
Make the J-46079 or Diagnostic Tool EL-50448 antenna up against the valve core position & close to the rim of the tire sidewall
El-50448 tire pressure tool starts by the start switch
Successful to read the tire pressure sensor information when the horn bleeps once
Step 3 - Same method to read other tire pressure information
Follow the instuction above to read tire pussure of the front-right, rear-right, rear-left wheels.
Turn signals is lighted for 3 seconds and the horn bleeps twice when the learning is complete.
For certain vehicles equipped with a Tire Pressure Monitoring (TPM) system, a "Sensor Re-Learn Procedure" must be performed after tire rotations, Remote Control Door Lock Receiver Module replacement or Tire Pressure Sensor replacement. This re-learn procedure can be performed by using special tool 50448
- Your order is already taken in process of packaging by a specialist, who knows his/her job pretty well, in our warehouse. Anyways, the order will be sent in 2 business days, and after 2 to 6 business days, you should be able to meet your package.
- Our prior shipping carrier is USPS or FedEx or UPS, according to the product. Your tracking number, which will show up in your message as package sent, should keep you reassuring while you play with it. If any suspicious information is spotted, please break in and let us know! We are eager to help, otherwise it gives us an illusion of nothing going wrong.
Please contact us firstly when you need warranty service.
In case an item arrives faulty, please contact us in 30 days and keep it unused.
We will instruct you on how to return and get refund or replacement.
If after 30 days, or the item has been used, we have the right to decline your claim.
Items should be returned on buyers' cost for repair or replacement.
In case an item arrives faulty, please contact us in 30 days and keep it unused.
We will instruct you on how to return and get refund or replacement.
If after 30 days, or the item has been used, we have the right to decline your claim.
Items should be returned on buyers' cost for repair or replacement.
Customer Service got fired if they don't work things out with you, so knock their door at will. If any question came in mind, please felt free to contact us through Messages. We will respond in 1 Business day. There shall be nothing to worry about as we have confidence to solve your issue.
For a presumably defective product received, this one would be a bit tricky. Please tell us where the problem occurs, and our Customer Service and Technical Department will work it through with you. Pictures and videos can come in handy here.
For any confusing or false description in the listing that causes a mis-purchase, please kindly remind us so we can improve our listings and continuously offer a better purchasing experience to you and to all our customers as well. Did it occur to be our mistake for the faulty transaction, we would be responsible for the return cost.
We wish you understand the pressures here, and our effort will always come to your aid.
For any confusing or false description in the listing that causes a mis-purchase, please kindly remind us so we can improve our listings and continuously offer a better purchasing experience to you and to all our customers as well. Did it occur to be our mistake for the faulty transaction, we would be responsible for the return cost.
We wish you understand the pressures here, and our effort will always come to your aid.
We maintain high standards of excellence and strive for 100% customer satisfaction!
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative or neutral feedback without any contact. If you haven’t received item in 30 days, please contact us and we will arrange refund.
Positive Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative or neutral feedback without any contact. If you haven’t received item in 30 days, please contact us and we will arrange refund.
Positive Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Copyright © 2021 Dianxiaomi