KINGBOLEN Car OBD2 Scanner YA-101 Auto Code Reader for Check Engine Light,O2 Sensor,EVAP Test,On-Board Monitor Test,Smog Check,OBD2 Diagnostic Scan Tool for All OBD2 Cars Since 1996[Upgrade Version]
Have you ever encountered an engine issue? The issue solved, but the warning light still cannot be reset?
Do you want to know the specific problems of your car before taking it to the auto repair shop?
Do you want to save more money in car repairs?
- If yes, KINGBOLEN ya-101 code readers & scan tools will help you solve these issues. it can read and erase codes which can also retrieve a wealth of information from the Engine Control Unit (ECU). Whether you know how to repair or not, you can learn more about your car through this diagnostic device, thus saving unnecessary maintenance costs
How much data can be read depends on the vehicle? there are over 40 live data PIDs,
- including FUELSYS(fuel system status), LOAD_PCT(Calculated load value), ECT(Engine Coolant Temperature), SHRTFT(Short term fuel trim-bank), LONGFT(Long term fuel trim-bank), Engine RPM, VSS(Vehicle Speed Sensor), SPARKADV(Ignition timing advance for cylinder 1), IAT(Intake air temperature), MAF(Mass Air Flow), TP(Absolute Throttle Position), EQ_RATB1S1(Equivalence Ratio Bank 1, Sensor1), O2B1S1(Oxygen sensor output voltage), EVAP_PCT(Commanded Evaporative Purge), etc.
How to Use YA-101 car code reader
- Just simply plug into the OBD II port on your car and turn ignition on.NO NEED TO REGISTER BEFORE UTILIZATION.
[Key Reasons To Buy KINGBOLEN YA-101]
- Check Engine Light/Turn off MIL(Malfunction Indicator Light)
- Help to Pass Vehicle Safety Inspection and Emissions Inspection
- Full OBDII Diagnostic Functions
- Advanced Mode6 On-Board Monitor Test and Mode8 EVAP Test/Compoment Test
- Battery Test
- Screenshot Display
- 9 Languages supported and Extensive Vehicle Coverage
- Lifetime Free Update
KINGBOLEN YA-101 provides full OBDII/EOBD diagnostic functions and meets protocols such as ISO9141-2, ISO14230-4,
SAEJ1850, and ISO15765-4.
KINGBOLEN YA-101 is better than CR3001 and CR319.YA101 provides a permanent free upgrade service that can be quickly
upgraded and free of drivers. YA101's mode 6 function is precise and perfect, not only can check the fault code, but also
can find the cause caused by the fault code, and can carry out battery test.YA101 is your best choice.
KINGBOLEN YA-101 Bullet Points:
Faster and in-depth scan the engine modules, it helps to find out the hiddened issue of the engine light.Focus on the
important modes like read and clear codes, mode6 and mode8, you can easily to know the on-board monitor system
and the evap system.You can also see the status of the misfire cylinder.
1.Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
3.Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4.I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and
5.Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6.View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time
7.O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from
8.On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
9.Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and
10.Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
Lifetime Free Update
No need to install drivers.Download the application of the YA101 on PC and copy it to the YA101 via the USB cable.
Review Back functions
Help you record and play back a readout or graph. This is useful if you have an intermittent problem that doesn’t generate
Quick Operations and Diagnosis
YA-101 OBDII scanner has a fast and intuitive operation through an easy-to-use and quick diagnostic response than comparable
Support Car Models for OBDII diagnostic function:
(Note: YA-101 only Support 12V cars, Does not support 24V Truck )
YA-101 Support all legislatedOBD2 protocols car :
1.SAE J1850 PWM(41.6Kbaud)
2.SAE J1850 VPW(10.4Kbaud)
3.ISO9141-2(5 baud init,10.4Kbaud)
4.ISO14230-4 KWP(5 baud init,10.4 Kbaud)
5.ISO14230-4 KWP(fast init,10.4 Kbaud)
6.ISO15765-4 CAN(11bit ID,500 Kbaud)
7.ISO15765-4 CAN(29bit ID,500 Kbaud)
8.ISO15765-4 CAN(11bit ID,250 Kbaud)
9.ISO15765-4 CAN(29bit ID,250 Kbaud)
No Worry About Compatibility
Can it works on your cars?
American Car :
For Chrysler , for Ford, for GM, For Jeep ...Need Standard OBD2 Protocols from 1996 to now
European Car :
For Alfa romeo , for SAAB ,for Acura , for Opel , for Audi for Seat , for Peugeot , for Renault , For Bentley , for Skoda ,
Japanese/Korean Car:
For KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai , for Dacia , for Lexus , for Mazda, for Nissan, for Subaru ,
Chinese Car:
Need Standard OBD2 Protocols from 2008 to now
Specifications:
Screen: 1.8" TFT Screen
Voltage: 12V
Operating Temperature: 0℃~ 50℃(32℉-122℉)
Environment Temperature: -20℃~70℃(-4℉-158℉)
Dimension: 4.8''*2.6''*0.8''
Weight: <220g
Packing List:
1pc * YA-101 Code Reader
1pc * English User Manual
