The expedition overland pull-out vehicle camping side awning range from Direct4x4 will provide you with protection from the elements all year round; great for work or leisure! We supply multiple sizes and fabric colours; you can also purchase optional LED lighting strips, side walls, a front panel and even a full heavy-duty tent conversion if you'd like to camp out under your awning. All made from premium quality materials throughout and designed to last!

PLEASE NOTE: We recommend using the guide ropes included at all times including in fine weather. If using on a hard surface a suitable weight could be used to attach the guide rope to.

• The awning, side walls and tent conversion are all made from durable 225GSM 420D Oxford polyester with impregnated mosquito repellents.
• Waterproof, mould proof and rot proof with a 100% UV block out rate.
• The twist-lock poles and spreaders are made of tough rustproof anodised structural aluminium.
• Very easy to fit and setup on-site. Fits neatly to your existing roof rack or roof bars using the brackets provided. Simply rolls out of the protective bag and then flex out the poles to fit - takes 1 or 2 people around 5 minutes.
• The vertical poles have a maximum height reach of 2.2m, suitable for most 4x4s and SUVs.
• Comes with all necessary brackets and fittings, including telescopic poles, guide ropes, pegs etc.
• Stylish colour choices to complement your vehicle and surroundings.
• Heavy-duty UV stabilised, 600GSM, 500D PVC protective cover with reliable zipper.
• Daily water column: 2000mm (including tent extension).
• The awning is designed to fit either side of the vehicle. It can even be fitted to the rear of certain vehicles and roof racks.
• The tent conversions are made from the same premium quality 420D Oxford polyester material with taped and double-stitched seams.
• 6-sided; ceiling, floor, 2 side walls and 2 zippable entrances front and rear.
• Comfortably sleeps 2 adults with plenty of room to stand up and walk around.
• 2 x multi-layer privacy side windows and front and rear doors. They can be opened, closed or covered with a tough inner netting to keep insects and bugs out.
• Zipped-in robust PVC groundsheet.
• The tent add-on is very easy to fit and assemble; simply slide into the channel on the expedition pull-out awning base and zip to the front section of the pull-out awning then attach around the top bars using the Velcro straps provided.

Important Information

• Before purchasing, we recommend that you measure the length of your vehicle and roof rack/roof crossbars so that you purchase an awning appropriate to your setup. If you are unsure, please contact our sales team directly and they will be able to advise you further.
• Depending on your roof rack/roof bars, you may need to fabricate a frame/plate for your roof rack system to marry your roof rack to the awning brackets.
• If the awning is packed away whilst wet, you will need to make sure that the awning is opened fully to allow it to dry properly. This will prolong the lifespan of the product.
• We recommend that you wet the awning canvas before first use to allow the stitching to expand, creating the waterproof seal.
• We recommend that the product is not used under severe weather conditions to avoid damage to the product.
• Our awnings are not suitable to be fitted to high roof vans and trucks.
• Dimensions: Length=2m (78.7 inches), Pullout depth=2m (78.7 inches), Height max.=2.2m (86.6 inches).
• Bracket Dimensions: Length=21cm (8.3 inches), Width=3cm (1.2 inches), Depth=4mm (0.1 inches). Gap between hole centres: 5cm (2 inches)

IMPORTANT INFORMATION

• Do not use expedition products in severe weather conditions.
• Pack all expedition gear away securely before driving vehicle.
• Expedition items should be dry before closing but if packed wet, open again at earliest convenience to dry fully.
• Ensure you have received all necessary components; if there's anything missing let us know right away.
• Avoid using TFR (Traffic Film Remover) products as this may cause corrosion and invalidate the warranty.
• For safety, check all bolts/brackets 7 days after installation and inspect all fixtures every 3 months.