This assembly comes with SMA male and Ts9 Male connectors

LMR-100A cable, Manufactured by Times Microwave systems is designed for low loss general-purpose applications.

The LMR range is recognised globally as the industry standard ultra low loss, flexible, low cost, lightweight, DC – 6GHz coaxial cable solution for many RF applications. This is also backed up by the best warranty and technical support in the business.


How is the LMR-100A low loss figures achieved?

This is achieved due to the cable construction specifications. The centre conductor uses a high conductivity, Bare copper clad covered aluminium centre conductor material. The dielectric is nitrogen injected, foamed, closed cell, Polyethylene which helps achieve 66% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor, which is chemically bonded on to it. Due to the cable construction, The attenuation is significantly lower as compared to single shielded coaxial cables.

Outer Jacket

The LMR-100A comes with a black PE Jacket. 

Frequency Operating Band

LMR-100A is designed to operate excellent from DC – 6GHz. For any frequency band at VHF and above LMR is the obvious choice.

 Applications

 LMR-100A Flexible Low Loss Communications Coaxial Cable is ideal for:
  • Drop-in Replacement for RG-316/RG-174 (uses standard connectors)
  • Jumper Assemblies in Wireless Communications Systems
  • Short Antenna Feeder runs
  • WLL
  • GPS
  • LMR
  • WLAN
  • WISP
  • WiMAX
  • SCADA
  • 3G or 4G repeaters
  • Radio antennas or receivers
  • VSAT Applications
  • TVRO

Attenuation dB figures per 100m   Mechanical Specifications               Temperature range: -40⁰C – +85⁰C  

30 MHz : 12.9 dB                                  Bend Radius: installation 6.4mm    Inner Conductor: Solid BCCS (0.46mm)
50 MHz : 16.7 dB                                  Bend Radius: repeated 25.4mm        Dielectric: Foam PE (1.52mm)
150 MHz : 29.4 dB                                Bending Moment: 0.014Nm               Outer conductor: Aluminium tape (1.65mm)
220 MHz : 35.8 dB                                Weight lb/ft  0.014Kg/M                   Overall Braid: Tinned copper (2.11mm)
450 MHz : 51.9 dB                                Tensile Strength  6.8Kg                   Jacket: Black PVC (2.79mm)
900 MHz : 74.9 dB                                Flat Plate Crush: 0.18Kg/mm
1500 MHz : 98.7 dB
1800 MHz: 109.0 dB
2000 MHz: 115.5 dB
2500 MHz : 130.6 dB
5800 MHz: 210.3 dB


This assembly comes with SMA male and Ts9 Male connectors

All Assemblies are custom made to order, We can supply and assemble any size cable and connectors, If you cant find what your looking for please message us and we’ll be happy to help with your requirements.



LMR® is a registered trademark of Times Microwave Systems