This set of 2 (two) Steering Links are 3D-printed out of super durable Black ABS+ Plus plastic.

The original steering links on this RC truck are super flexible! 

---->  The OEM steering Links bend, bow and warp as you try and twist and turn through the rocks, never quite getting that extra half inch of movement you need to clear your latest obstacle... Fix that in less than 2 minutes!

This upgraded Steering Link set will take the place of the original steering link part with no modifications required!   All of the stock hardware is re-used, installation takes minutes and only requires basic tools.

1. remove your original steering link(s)

2. remove original ball joint from original steering link

3. re-install ball joint into the Upgraded Steering Link using a 5mm socket or some wide grip pliers 

(this is a Tapped hole, but go slowly to find the threads). Do Not Over Tighten!

4. re-install the knuckle screws into new steering link (you will be tapping this part with the stock screws. go slowly)

5. re-attach the servo link to the ball joint

6. Go crawling!