eBay

LCR-TC2: It is an upgraded version of TC-T7-H. Compared with TC-T7-H, it has upgraded circuit structure, long-term battery life, optimized code, and resistance value of 1/1000 (this is related to the consistency of repeated testing, that is, the same resistance will change without repeated testing, and some An error will occur if the test is repeated)

Feature:

Self-test with automatic calibration

Size: 70*90*26m/ 2.71x3.58x1.10 inches

Display: TFT screen, color screen

Diode range: less than 4.5V

Zener diode: Transistor detection area: 0.01-4.5V

Zener diode detection area: 0.01-30V

SCR range: IGT is less than 6mA

Capacitance: 25pF-100mF

Resistance: 0.01-50MΩ

Inductance: 0.01mH-20H

Power supply voltage: 3.7V

Power supply: built-in rechargeable lithium battery

Measurement results using TFT graphic display (160x128)

One key operation

Automatic shutdown (timeout setting)

Built-in high-capacity rechargeable lithium-ion battery

Lithium-ion battery voltage detection

Warning: Built-in lithium ion battery, it is strictly forbidden to immerse the tester in water or close to a heat source!

Warning: For your personal safety, please strictly abide by the regulations and precautions for using lithium-ion batteries!

Transistor detection:

After the power is off or the test is completed, put the test component into the transistor test area of the test socket, press the lock handle, press the multi-function button, the tester will automatically measure, and the measurement result will be displayed at the end of the test.

Warning: Before connecting the capacitor to the tester, be sure to discharge it! The tester may be damaged if it is not turned on!

Warning: We do not recommend using a tester to measure batteries! The battery voltage must be less than 4.5V, otherwise the tester may be damaged!

Component placement:

The test socket is divided into transistor and Zener diode test areas, as described in 1.1.

Note: Do not perform other operations during the calibration process, so as not to affect the calibration accuracy!

Packing list:

1 x Multifunction TFT transistor tester

1 x Electronic component group (sent randomly)

3 x Test hook

Short-circuit the three test sockets, short press the multi-function button, and the tester will automatically calibrate.

After the short-circuit wire is disconnected according to the prompts during calibration, no other operations are required.

Payment Method
Shipping Policy
Feedback

Payment Method

Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

Shipping Policy

1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.

Feedback

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.